Earth's magnetic field is approximately 1/2 gauss, that is 50 micro-tesla because the SI field unit of a tesla is 10,000 gauss. Earth's north geographic pole is close to its south magnetic pole, and magnetic field is directed from the north to the south poles of a magnetic dipole so it goes from Earth's south geographic pole towards its north. Suppose you have wire carrying a large DC current from the south wall of a building to its north wall and that it is horizontal, on the floor. If Earth's field is parallel to the ground and does not dip, what force if any would the wire experience

Answer:

a) the body  is changing direction,

b)the body must go to the left and the acceleration to the right

c) the movement has not started.

d) all points of the motion

Explanation:

In this exercise you are asked to find in which position you have the following characteristics of the movement

a) The velocity is zero and the acceleration is negative

This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.

In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases

b) The velocity is zero, but the acceleration is positive

This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right

c) Both are zero

This only occurs where the body is stopped and the movement has not started.

d) both the velocity and the relation are nonzero.

This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration

Answer:

Im 99.99999% sure its c

Explanation:

i cant see the pictures too well

Answer:

98.11 I think

Explanation:

I really hope this helps have a wonderful day

Answer:

[tex]\mathbf{ current(I) =1766.67 \ A}[/tex]

Explanation:

Given that:

The air resistance and friction = 700 N

The gravity caused force = 716 × 9.8 = 7016.8

Total force = (7016.8 + 700) N

Total force = 7716.8 N

∴

[tex]13 \times current(I) \times 0.84 = \dfrac{7716.8 \times 300}{2 \times 60}[/tex]

[tex]current(I) \times 10.92= 19292[/tex]

[tex]current(I) = \dfrac{19292}{10.92}[/tex]

[tex]\mathbf{ current(I) =1766.67 \ A}[/tex]

Answer:

a) electric field at point P must be zero

b) harged must be positive

c) force ais in the direction of the electric field

d)  force is in the opposite direction to the electric field

e)  force is in the opposite direction to the field

Explanation:

After reading your exercise, it is unfortunate that the diagram did not come out, but we are going to answer the questions in general.

a) force on a charge (+) is zero

this implies that the electric field at point P must be zero

        F = q E

b) the magnitude of the charge on the left is on the right

this indicates that the charged must be positive since the lines must exit the charge

c) force on load directed towards (direction not indicated)

since the charge is positive the force at point L is in the direction of the electric field at this point

d) force on test load (-) does not indicate direction

The force on a negative charge is in the opposite direction to the electric field at point J

e) Force on a test load (-) at point N

the force is in the opposite direction to the field at point N

Answer:

5 m/s

Explanation:

50=1/2*4v^2

4*1/2=2

25*2=50

so...

square rood of 25 is 5

answer 5 m/s

sorry if that didn't make since

Answer:

because the strength of Earth's gravitational field is not uniform everywhere, a given pendulum swings faster, and thus has a shorter period, at low altitudes and at Earth's poles than it does at high altitudes and at the Equator.

Answer:

Explanation:

Total time taken = 0.85 s .

Time taken by sound to travel 5.43 m + time taken by coin to fall by 5.43 m = .85

5.43 / 343 + time taken by coin to fall by 5.43 m = .85

time taken by coin to fall by 5.43 m = .85 - 5.43/343 = .834 s

Let the initial velocity of throw of coin = u

displacement of coin s  = 5.43 m

time take to fall t =  .834 s

s = ut + 1/2 gt²

5.43 = u x .834 + .5 x 9.8 x .834²

5.43 = u x .834 + 3.41

u x .834 = 2.02

u = 2.42 m /s .

Answer:

      I =  [tex]\frac{1}{4\pi \ r^2}[/tex]

we see the intensity decreases with the inverse of the distance squared

Explanation:

Intensity is defined as power per unit area,

           I = P / A

in this case we have that the sound is emitted in a spherical form therefore the area is

           A = 4 pi r2

therefore the intensity is

          I =  [tex]\frac{1}{4\pi \ r^2}[/tex]

as we see the intensity decreases with the inverse of the distance squared

Answer:

Answer is explained in the explanation section below.

Explanation:

In this question, we are asked to find out the direction of acceleration and direction of the normal force acting upon us from the always upright seat.

a) You pass through the highest point:

When we sit in the Ferris wheel at the any amusement park, and when it starts rotating and the time when we reach the highest point, then the direction of of our acceleration will be towards the center or it will be towards downward direction.

And at the highest point on the Ferris Wheel, the direction of the normal force F acting upon us will be upwards.

b) You pass through the lowest point of the ride:

When we sit in the Ferris wheel at the any amusement park, and when it starts rotating and the time when we reach the lowest point, then the direction of of our acceleration will be towards the center or it will be towards upward direction.

And at the lowest on the Ferris Wheel, the direction of the normal force F acting upon us will be upwards again.

Answer:B

Explanation:

C and O

Atoms of C and O pair of elements will form covalent bonds in a compound.Therefore the correct option is B.

The chemical compound is a combination of two or more  either similar or dissimilar chemical elements

for example, H₂O is a chemical compound made up of two oxygen atoms and a single hydrogen atom.

These chemical compounds are formed because of different types of bonds between the constituents elements ,the chemical bonds are mainly ionic bonds, covalent bonds,s, and hydrogen bonds.

Ionic bonds are formed due to the transfer of electrons between two bond forming pairs differentiated by their electronegativity.

Covalent bonds are formed by the sharing of electrons.Generally organic compound are formed as the reason of covalent bonds.

The carbon and oxygen atoms share their valence electrons to form a covalent bond, therefore the correct option is B.

Learn more about a chemical compound from here

brainly.com/question/12166462

#SPJ5

The molecular mass of [tex]$O_{3}[/tex] is 0.43728kg

Molecular mass exists as a number equivalent to the totality of the atomic masses of the atoms in a molecule.  The totality of the atomic masses of all atoms in a molecule is established on a scale in which the atomic masses of hydrogen, carbon, nitrogen, and oxygen exist 1, 12, 14, and 16, respectively.

To compute the Molecular Mass of [tex]$O_{3}[/tex]

Atomic mass of oxygen(O) = 16

As [tex]$O_{3}[/tex] contains 3 atoms,

The molecular mass of [tex]$O_{3}[/tex]

= (16 x 3) = 48g/mol

Hence the mass of 9.11 moles O3

= 9.11 mol x 48g/mol

= 437.28g

= 0.43728kg

Therefore, the molecular mass of [tex]$O_{3}[/tex] is 0.43728kg

To learn more about Molecular mass refer to:

https://brainly.com/question/24727597

#SPJ2

Answer:

-0.54m/s²

Explanation:

According to Newton's second law of motion

F = ma

Force = mass * acceleration

Given

Mass m = 4490kg

Take the sum of forces

Sum of force along the east = 890+1210 = 2100N

Sum of forces along the west = -4520N

Net force = -4520+2100

Net force = -2420N

Acceleration = Net force/Mass

Acceleration = -2420/4490

Acceleration = -0.54m/s²

Hence the boat acceleration is -0.54m/s²

Answer:

All answer are explained below in the explanation section.

Explanation:

1. The pressure varies proportionally with the change in temperature. It can also be observed in our daily lives.

As for example, a pressure cooker uses the same principal to cook food faster. With the increasing temperature, the pressure inside the cooker increases.

Thus after a while, the excess pressure inside is released through the top nozzle. The data shown below supports that pressure and temperature varies linearly.

2. Hand drawn plot is attached in the attachment please refer to the attachment for the hand drawn plot.

Tire pressure at temperature 18.6 degree C is ~ 35 psi.

Temperature at air pressure of 37 psi is ~26.1 degree C

3. a.) Necessary values are included in the stat box. It is attached in the attachment please refer to the attachment.

3. b) The equation becomes: Pressure = 0.176 x temperature + 32.32

3. c) It is already done in part a of this question.

4. The value of the slope estimated from the linear fit is 0.176 +/- 0.094.

5. % Error = [tex]\frac{Actual - Experiment}{Actual} x 100[/tex]

Plugging in the values, we get:

Actual = 0.145, Experimental = 0.176. Thus, percentage error is given by:

% Error = 21.33%

6. a.) Visual estimation of tire pressure at t = 18.6 degree C is ~ 35 psi

6.  b.) Estimation of pressure from the best fit line is given by 35.6 psi, which is consistent with the eye estimation value.

6. c.) The eye estimation and the estimation from the line fit are quite comparable. The discrepancy of +/-0.5 psi is within the percentage error calculated in 5.

7.  a.) Visual estimation of temperature of the air for a tire-pressure of 37 psi is ~ 26 degree C.

7.  b.) Estimation of temperature from best fit value of line is = 26.64 degree C

7 c) The values from eye estimation and evaluated from the fit are quite consistent within a random fluctuation of +/- 0.64 degree C.

Answer:

0.0119502868 kilocalorie

Explanation:

Answer:

increases by 50

Explanation:

Answer:

a) v_f = 0.898 m / s, b)   v₂ = -6.286 m / s

Explanation:

a) For this exercise we use the conservation of momentum, we define a system formed by the astronaut, her equipment and the expelled gases. We must also define a stationary frame of reference, let's place the system on the platform, so the speed of the subject is v = -3 m / s

Initial instant. Before you start to pass gas

        p₀ = (M + Δm) v

M is the mass of the astronaut M  = 80Kg and Δm the masses of the gases

Final moment. When you expel the gases

        p_f = M (v + Δv) + Δm (v-v_e)

where v_e is the gas velocity v_e = 100 m / s

momentum is conserved

        p₀ = p_f

        M v + Δm v = Mv + M Δv + Δm v -Δm ve

          0 = M Δv - Δm v_e

if we make the very small quantities Δv → dv and Δm → dm, furthermore the quantity of output gas is equal to the decrease in the total mass dm = -dM

         M dv = -v_e dM

         ∫ dv = - v_e ∫ dM / M

We solve, between the lower limits v₀ = v with M = M₀   and the upper  limit v = v_f for M = M_f

         v_f - v₀ = - v_e (ln M_f - Ln M₀)

         v_f - v₀ = v_e ln ([tex]\frac{M_o}{M_f}[/tex])

         v_f = v₀ + v_e ln (\frac{M_o}{M_f})

let's calculate

         v_f = -1.3 + 100 ln (80 + 10 + 2/80 + 10)

          v_f = -1.3 +2.20

          v_f = 0.898 m / s

b) launch the jetpack to increase its speed up to the speed of the platform

  initial instant. Before launching the tanks

        p₀ = (M + m') v_f

final instnte. After launching the tanks

       p_f = M v₁ + m' v₂

indicate that the final velocity of the astronaut is the platform velocity v₁=0 m / s, since the reference system is fixed on it

       p₀ = p_f

       (M+ m) v_f = M v₁ + m v₂2

       v₂ = [tex]\frac{ M ( v_f - v_o) + m' v_f}{m'}[/tex]

        v₂ = [tex]\frac{M}{m}[/tex] (v_f -v₁) + v_f

let's calculate

        v₂ = 80/10 (0.898 - 0) + 0.898

        v₂ = -7.1874 + 0.898

        v₂ = -6.286 m / s

Answer:

a)  W = 1.63 10⁻²⁸ J,  b)  W = 1.407 10⁻²⁷ J, c) W = 1.68 10⁻²⁸ J,

d)  W = - 4.93 10⁻²⁸ J

Explanation:

a) In this problem we have an electron at the origin, work is requested to carry another electron from infinity to the point x₂ = 0, y₂ = 2.00m

If we use the law of conservation of energy, work is the change in energy of the system

          W = ΔU = U_∞ -U

the potential energy for point charges is

           U =k [tex]\sum \frac{q_i q_j}{r_{ij} }[/tex]

in this case we only have two particles

           U = k [tex]\frac{q_1q_2}{r_{12} }[/tex]

the distance is

           r₁₂ = [tex]\sqrt{(x_2-x_1)^2 + ( y_2-y_1)^2 }[/tex]

           r₁₂ =[tex]\sqrt{ 0 + ( 2-0)^2}[/tex]Ra 0 + (2-0)

           r₁₂ = √2= 1.4142 m

we substitute

           W = k \sum \frac{q_i q_j}{r_{ij} }

let's calculate

            W = [tex]\frac{ 9 \ 10^9 (1.6 \ 10^{-19})^2 }{1.4142}[/tex] 9 109 1.6 10-19 1.6 10-19 / 1.4142

            W = 1.63 10⁻²⁸ J

b) the two electrons are fixed, what is the work to bring another electron to x₃ = 3.00 m y₃ = 0

in this case we have two fixed electrons

            U = k [tex]( \frac{q_1q_3}{r_{13} } + \frac{q_2q_3}{r_{23} } )[/tex]

in this case all charges are electrons

             q₁ = q₂ = q₃ = q

             W = U = k q² [tex]( \frac{1}{r_{13} } + \frac{1}{r_{23} } )[/tex]

the distances are

            r₁₃ = [tex]\sqrt{(3-0)^2 + 0}[/tex]RA (3.00 -0) 2 + 0

            r₁₃ = 3

            r₂₃ = [tex]\sqrt{ 3^2 + 2^2}[/tex]Ra (3 0) 2 + (2 0) 2

            r₂₃ = √13

            r₂₃ = 3.606 m

let's look for the job

            W = U

let's calculate

            W =[tex]{9 \ 10^3 ( 1.6 10^{-19})^2 }({\frac{1}{3} + \frac{1}{3.606} } )[/tex]

            W = 1.407 10⁻²⁷ J

c) the three electrons are fixed, we bring the four electron to x₄ = 3.00m,

y₄ = 4.00 m

             W = U = k [tex]( \frac{q_1q_4}{r_{14 }} + \frac{q_2q_4}{r_{24} } + \frac{q_3q_4}{r_{34} } )[/tex]

all charges are equal q₁ = q₂ = q₃ = q₄ = q

             W = k q² [tex](\frac{1}{r_{14} } + \frac{1}{r_{24} } + \frac{1}{r_{34} } )[/tex]

let's look for the distances

             r₁₄ = [tex]\sqrt{3^2 +4^2}[/tex]

             r₁₄ = 5 m

             r₂₄ = [tex]\sqrt{3^2 + ( 4-2)^2}[/tex]

             r₂₄ = √13 = 3.606 m

             r₃₄ = [tex]\sqrt{(3-3)^2 + (4-0)^2}[/tex]

            r₃₄ = 4 m

we calculate

           W = 9 10⁹ (1.6 10⁻¹⁹)²  [tex]( \frac{1}{5} + \frac{1}{3.606} + \frac{1}{4} )[/tex]

           W = 1.68 10⁻²⁸ J

d) we take the proton to the location x5 = 1m y5 = 1m

            W = U = k [tex]( \frac{q_1q_5}{r_{15} } + \frac{q_2q_5}{r_{25} } + \frac{q_3q_5}{r_{35} } + \frac{q_4q_5}{r_{45} } )[/tex]

in this case the charges have the same values ​​but charge 5 is positive and the others negative, so the products of the charges give a negative value

            W = - k q² [tex]( \frac{1}{r_{15} } + \frac{1}{r_{25} } + \frac{1}{r_{35} } + \frac{1}{r_{45} } )[/tex]

we look for distances

            r₁₅ = [tex]\sqrt{ 1^2 +1^2}[/tex]Ra (1-0) 2 + (1-0) 2

            r₁₅ = √ 2 = 1.4142 m

            r₂₅ = [tex]\sqrt{ (2-1)^2 +1^2}[/tex]

            r₂₅ = √2 = 1.4142 m

            r₃₅ = [tex]\sqrt{ ( 3-1)^2 +1^2}[/tex]

            r₃₅ = √5 = 2.236 m

            r₄₅ = [tex]\sqrt{ (3-1)^2 + (4-1)^2}[/tex]

            r₄₅ = √13 = 3.606 m

we calculate

           W = - 9 10⁹ (1.6 10⁻¹⁹)² [tex]( \frac{1}{1.4142} +\frac{1}{1.4142} + \frac{1}{2.236} + \frac{1}{3.606} )[/tex]

            W = - 4.93 10⁻²⁸ J

Answer:fastest,same,slow down,opposite,slow

Explanation:

A satellite move fastest when its closest to the Earth. The other correct options are same direction, speed up, opposite direction and slow.

If a satellite is orbiting the Earth in elliptical motion, then it will move fastest when its closest to the Earth (based on Kepler's, law).

While moving towards the Earth (along the path from D to A) there is a component of force in the  same direction as the motion; this causes the satellite to speed up.

While moving away from the Earth (along the path from A to D) there is a component of force in the opposite direction as the motion; this causes the satellite to slow.

Learn more about motion of satellite here: https://brainly.com/question/25721729

#SPJ2

Answer:

Explanation:

a )

Hoverfly will fall with acceleration equal to g .

Initial velocity of fall of hoverflies u = 0

displacement ( vertical ) h = ?

time t = 0.2 s

acceleration due to gravity g = 9.8 m / s²

h = ut + 1/2 g t²

= 0 + .5 x 9.8 x .2²

= .196 m

= 19.6 cm

b )

Time taken to fall by 50 cm or 0.5 m under free fall from initial position .

.5 = 0 + .5 x 9.8 t²

t² = .1020

t = .319 s = 319 ms .

Complete question is;

A rope, attached to a weight, goes up through a pulley at the ceiling and back down to a worker. The worker holds the rope at the same height as the connection point between the rope and weight. The distance from the connection point to the ceiling is 40 ft. Suppose the worker stands directly next to the weight (i.e., a total rope length of 80 ft) and begins to walk away at a constant rate of 3 ft/s. How fast is the weight rising when the worker has walked:

A) 10 feet

B) 30 feet

Answer:

A) 0.728 ft/s

B) 1.8 ft/s

Explanation:

Let the the position of the worker in ft be denoted by s.

Since he begins to walk away at a constant rate of 3 ft/s, then;

ds/dt = 3 ft/s

Now, the rope will form a triangle, with width "s" and the height 40. Since distance from the connection point to the ceiling = 40 ft

Using pythagoras theorem, we can find the length of the rope on this side of the pulley.

Hence, the length of rope on this side of the pulley = √(s² + 40²)

Meanwhile, on the other side the length will be;

(80) - √(s² + 40²)

Also, height of the weight will be;

h = 40 - ((80) - √(s² + 80²))

h = √(s² + 80²) - 40

Differentiating this, we have;

dh/dt = (ds/dt) × (s/√(s² + 40²))

From earlier, we saw that ds/dt = 3 ft/s

Thus;

dh/dt = 3s/√(s² + 40²)

A) when he has walked 10 ft, it means that s = 10. Thus;

dh/dt = (3 × 10)/√(10² + 40²)

dh/dt = 0.728 ft/s

B) when he has walked 30 ft, it means that s = 30. Thus;

dh/dt = (30 × 3)/√(30² + 40²)

dh/dt = 1.8 ft/s

Answer:

[tex]\boxed {\boxed {\sf 6,000 \ Newtons}}[/tex]

Explanation:

Force is the product of mass and acceleration.

[tex]F=ma[/tex]

The mass of the Kia Soul is 1200 kilograms and its acceleration is 5 meters per square second.

[tex]m= 1200 \ kg \\a= 5 \ m/s^2[/tex]

Substitute the values into the formula.

[tex]F= 1200 \ kg * 5 \ m/s^2[/tex]

Multiply.

[tex]F= 6000 \ kg*m/s^2[/tex]

[tex]F= 6000 \ N[/tex]

Answer:

Force

We know that

F = ma

F = Force

m = mass

a = acceleration

F = 1200 × 5

F = 6000 N

[tex] \\ [/tex]

Answer:

d

Explanation:

the US West Coast region probably has cooler summers than it would without the effect of a nearby ocean current.

ocean current can be defined as the horizontal movement of seawater which is produced by gravity, wind, and water density, it play an major role in the determination of climates of coastal regions.

The movement of ocean water is continuous which can be up three types such as Waves, Tides, Currents

The streams of water which flow continuously on the ocean surface in specific directions are called ocean currents, it affect the temperature of ocean water as Warm ocean currents increase the temperature whereas Cold ocean currents decrease the temperature.

The magnitude of the ocean currents is about  few centimeters per second to as much as 4 metres per second and the intensity of the ocean currents generally decreases with increasing depth.

There are two types of ocean currents such as Warm Ocean Currents

and Cold Ocean Currents

For more details ocean current,  visit

https://brainly.com/question/21654036

#SPJ2

Explanation:

Explanation: When a particle moves along a straight path, then the radius of curvature is infinitely great. This means that v2/r is zero. Explanation: When a particle moves with a uniform velocity, then dv/dt will be zero.

Answer:

a

Explanation:

Answer:

A quantity that has magnitude and direction. It's usually represented by an arrow whose direction is the same direction is the same as that of the quantity and whose length is proportional to the quantity's magnitude

The name of the SI unit for magnetic field strength is Tesla. Magnetic fields are formed by moving electric charges.

Magnetic field strength alludes to an actual amount that is utilized as one of the essential proportions of the power of the attractive field.

The SI unit of attractive field is tesla (T). 1 Tesla is defined as the magnetic field that carries 1C charge at the speed of 1m/s which is perpendicular to the force of 1 N.

Find more information about magnetic field strength here:

brainly.com/question/18651668

Answer:

speed = 10.1215 m/s

Explanation:

speed = distance / time

speed = 100 / 9.88 = 10.1215 m/s