Answer:
Yes
Explanation:
One of the top goals of genetic engineering is the improvement of health. Imagine a world without the threat of AIDS or cancer. Those working in the genetics field hope that manipulating the genes of humans will one day enable science to prevent people from contracting these potentially deadly diseases.
How many protons does isotope of carbon- 14 atom have
Answer:
Number of protons in Carbon - 14 atom [tex]6[/tex]
Explanation:
The atomic number of carbon 14 atom is [tex]14[/tex]
Number of neutrons in the nucleus of Carbon-14 atom [tex]= 8[/tex]
Atomic number is equal to the sum of neutrons and protons
Number of protons in Carbon - 14 atom [tex]= 14 -8 = 6[/tex]
13. What is the meaning of the word faint?
why a “control” is important in a case-control study of a disease?
Answer:
Explanation:
Purpose of Case Control Studies
To determine whether or not an association exists between a disease and a particular risk factor. To start with a group of people with disease and work back to see whether a possible risk factor may be the cause. It may be the first step in testing a hypothesis.
Calculate ΔGo if the equilibrium constant is 1.37 x 10-5
Explanation:
your answer willing be 8.7
Chemical reactions happen when _____. a.atoms attract or repel one another b.heat is created by friction c. two or more substances are mixed substances are heated or d.cooled
Answer:
A
Explanation:
Which name for an ionic compound is
incorrect?
Chromium(IID fluoride (for CrF3 )
Copper(ID) oxide (for Cuo)
Potassium(I bromide (for KBr)
Answer:
no se ingles todavía no aprendo a hablar inglés ya si estuvieran en español los respondia
Elements are solid liquid and gas substance that can be found on earth which statements best describes an element
Answer:
i guess
Explanation:
we will never know
Help plzzzzz it's due today ----- Would Shining light on the reaction increase or decrease the reaction rate
Answer:
increase
Explanation:
Reactions that are initiated by light are called photochemical reactions. The brighter the light, the faster the reaction.
Answer: An increase in temperature typically increases the rate of reaction. An increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision (Figure. 17.5 “Temperature and Reaction Rate”).
Explanation:
I need help ASAP pls the last question
Answer:When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed. ... The particles exert more force on the interior volume of the container. This force is called pressure.
Explanation:
How many moles are contained in 7.88 x 10^24 atoms of Iron
Answer:
1.31 × 10^47
Explanation:
1 mol of Fe =
[tex]1 \: mol \: of \ fe = 6.02 \times 10 ^{23} \ \\ x \: mol \: offe \: = 7.88 \times {10}^{24} \\ \\ \\ so \: 7.88 \times {10}^{24} \div 6.02 \times {10}^{23} \\ \\ x = 1.31 \times {10}^{47} [/tex]
I’m stuck on number 2
How many atoms of which elements are represented by the following formula?
H3PO4
Hypothesis: What do you think will happen when you add more magnets to the set up?
Answer:
........................
What is weather?
a
The atmospheric conditions over many days, weeks, months, and years.
b
The atmospheric conditions for a particular moment in time.
c
The atmospheric conditions forecasted for the next season.
Where is the main asteroid belt in the solar system?
Answer:
It's between Jupiter and Mars.What will be the volume occupied by 100 grams of oxygen gas
at STP?
Answer:70L
Explanation:
The volume occupied by 100g of oxygen gas at STP is 70L.
1 mole of a gas at STP occupies 22.4 L volume.
The same goes for oxygen gas, [tex]O_2[/tex]. 1 mole of [tex]O_2[/tex] occupies 22.4L volume.
Now the molar mass of [tex]O_2[/tex] is = 32g
So the number of moles of [tex]O_2[/tex] in 100g is
n = 100/32
n = 3.125 moles
Volume occupied by 3.125 moles or 100g of [tex]O_2[/tex] is
V = 3.125 × 22.4 L
V = 70 L volume is occupied by 100g of oxygen gas.
Learn more :
https://brainly.com/question/19958403
Which element is malleable and ductile?
A. Phosphorus
B. Argon
C. Sodium
D. Chlorine
Can you help me answer all of these I’ll mark brainliest
Answer:
C.) Sodium
Explanation:
Sodium is an "Alkali Metal"
True or False:
Houston, Texas received approximately 2 inches of snow on February 15, 2021. Based on this, we can now say Houston's climate consists of long, freezing winters and yearly snowfall. Please answer ASAP. Thanks
Answer:
False.
Explanation:
I majored in Chemistry
How many atoms is 45 moles of silicon (Si)?
Jewelry and tableware are sometimes made of sterling silver. Sterling silver is 92.5% silver (Ag) and 7.5% copper (Cu). If you wanted to make 30 grams of sterling silver for a ring, how many grams of silver and copper would you need to start with?
Amount of sterling silver?
Amount of copper?
total grams of alloys needed?
Answer:
12.33
Explanation:
92.5/7.5= 12.33
30g of the sterling silver ring contains, 27.75 g of silver and 2.25 g of copper.
What is cross multiplication?Cross multiply fractions by multiplying one fraction's denominator by the other fraction's numerator and then comparing the two values. The larger fraction is the one with the higher value.
100g of sterling silver contains 92.5g of silver and 7.5g of copper.percentage of element = amount of the element present in 100 g of materialTherefore,
100g sterling silver = 92.5g silver30g sterling silver = X g silver( cross multiplication),
100 × X = 92.5 × 30
X = 92.5 × 30/ 100
X= 27.75g silver100g sterling silver = 7.5g copper
30g sterling silver= Y g copper
(cross multiply)
100 × Y = 7.5 × 30
Y= 7.5 × 30 / 100
Y= 2.25g copperX (silver)= 27.75 g in 30 g of sterling silverY (copper)= 2.25 g in 30 g of sterling silvertherefore, 30g of sterling silver ring contains, 27.75 g of silver and 2.25 g of copper.
To learn motre about cross multiplication, refer to:
https://brainly.com/question/28839233
#SPJ2
A balloon with a volume of 0.5L at 293K is cooled to 20K. What is the balloon's new
volume?
Answer:
0.03 L
Explanation:
Step 1: Given data
Initial volume of the balloon (V₁): 0.5 LInitial temperature of the balloon (T₁): 293 KFinal volume of the balloon (V₂): ?Final temperature of the balloon (T₂): 20 KStep 2: Calculate the final volume of the balloon
The balloon is filled with air. If we assume it behaves as an ideal gas, we can calculate the final volume of the balloon using Charles' law.
V₁/T₁ = V₂/T₂
V₂ = V₁ × T₂/T₁
V₂ = 0.5 L × 20 K/293 K = 0.03 L
In a graph, what effect would adding a catalyst have on D?
A. It would decrease.
B. It would increase.
C. It would stay the same.
D. You cannot tell from this graph.
Answer:
C. It would stay the same
Explanation:
PLATO answer
Due to changes in the environment, having lighter-colored fur becomes a
survival advantage in a population of wolves.
What is most likely to happen in the next generation?
Answer:
There will be more light-colored wolves.
Explanation:
Evolution is based off the survival of those with the most advantages in the wild. Since their light coat gives them a survival advantage, they will reproduce more.
1.I make my cup of coffee in the morning by pouring boiling water over ground-up coffee beans held in a special piece of paper and by collecting the brown liquid that comes through. Which techniques of the five described in the background section is/are used in the preparation of the cup of coffee
Answer:
Filtration
Explanation:
Filtration is a physical separation technique that is used to separate solids from liquids or gases. The process involves the use of a filter which allows just the liquid to pass through.
In this case, the coffee beans is the solid and the boiling water is the liquid. The special piece of paper is the medium (filter) through which the coffee is collected.
The coffee coming through the special piece of paper (filter) is called a filtrate.
Filtration is used in the preparation of the cup of coffee.
How many atoms is 45 moles of silicon (Si)?
how do I find the slope of this graph? Is it even possible?
Answer:
Not exactly But you can take the slope of the curved portion and the slope of the flatline.
It wont do you much good since your working for absorbance but if you ever see something like a temperature change you can use the slope(s) to find freezing points/melting
Explanation:
If you need to submit a slope you could use a best fit which is just point to point or you could break it up like i mentioned
1) How many moles of water does 6.02 x 1023 molecules
represent?
Answer:
1.00 mol
Explanation:
Step 1: Given data
Molecules of water: 6.02 × 10²³ molecules
Step 2: Calculate the number of moles corresponding to 6.02 × 10²³ molecules of water
In order to convert molecules to moles, we need a conversion factor. In this case, we will use Avogadro's number: there are 6.02 × 10²³ molecules in 1 mole of molecules.
6.02 × 10²³ molecules × 1 mol/6.02 × 10²³ molecules = 1.00 mol (we keep 3 significant figures)
g 8. A hydrogen atom is initially a rest and in the ground state. A proton with kinetic energy 1000 eV scatters off the atom. In the process the hydrogen atom is ionized. The kinetic energy of the ionized electron is measured to be 15.2 eV and the kinetic energy of the proton produced from the ionization of hydrogen is 4.3 eV. What would be the final kinetic energy of the projectile proton after the collision
Answer:
Explanation:
Ionization energy of hydrogen atom is 13.6 eV . This energy will be provided by energetic proton , the kinetic energy of which is 1000 eV. The kinetic energy of ionized electron is 15.2 eV . Kinetic energy of proton produced from from the ionization of hydrogen or the nucleus of the hydrogen atom is 4.3 eV . All these energy must have come from kinetic energy of initial proton.
So kinetic energy of projectile proton after collision
= 1000 - ( 13.6 + 15.2 + 4.3 ) eV.
= 966.9 eV .
Explain the difference between endothermic and exothermic processes. Provide an example of each.
These are reactions that transfer energy to the surroundings (ie the energy exits from the reaction, hence the name exothermic). The energy is usually transferred as heat energy, causing the reaction mixture and its surroundings to become hotter. A thermometer is used to detect the temperature increase.
Examples:
Combustion
Neutralisation between acids and alkali
Endothermic reactionsThese are reactions that take in energy from the surroundings (ie energy enters the reaction, which will help you to remember the name endothermic). The energy is usually transferred as heat energy, causing the reaction mixture and its surroundings to become colder. A thermometer is used to detect the temperature decrease.
Example:
Electrolysis
How many moles are in 74.8 grams of NaCl?
Answer:
1.28 mol NaCl
Explanation:
Find the mass of NaCl by adding the two elements atomic mass
Na: 22.99
Cl: 35.45
22.99+35.45=58.44 g
Now convert to moles
74.8 g / 58.44 g = 1.27994524298 mol