Determine the work done by the force Fx=(6x-4)N as the object moves from x1=0 to x2=3 m.

Light - emitting diode lightbulbs known as LED lightbulbs are energy saving lightbulbs. They consume very small amount of energy compare to other lightbulbs. Therefore, LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.

There are varieties of different light bulbs. some of them are  incandescent, compact fluorescent (CFL), halogen, and light-emitting diode (LED) to mention a few.

Before the advent of light - emitting diode (LED) bulbs, some of the bulbs consume a lot of energy. For instance, we have incandescent bulbs of 20 watts, 50 watts, 100 watts and even 200 watts.

But with the advent of light - emitting diode (LED) bulbs, consumers can save energy because light - emitting diode (LED) bulbs save a lot of energy and they are very bright.

We can therefore conclude that light - emitting diode lightbulbs known as LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.

Learn more here: https://brainly.com/question/13423221

Answer:

force of gravitational attraction between them also decreases.

Explanation:

force of gravitational attraction between them also decreases.

Answer:

afcorse 1 miles

Explanation:

yep plz make me the brainliest

The distance travelled by car is displacement which is

Displacement is defined to be the change in position of an object.

[tex]s=\frac{1}{2} (v+u)t[/tex]

[tex]s=\frac{1}{2} (25+20)4\\s= 90 m[/tex]

To learn more about Displacement here

https://brainly.com/question/11934397

#SPJ2

The amount of work done to stop the car is equal to 322,099.85 Joules.

Given the following data:

Conversion:

Velocity = 95 km/h = [tex]\frac{95 \times 1000}{60 \times 60} = 26.39 \;m/s^2[/tex]

To determine the amount of work done to stop the car, we would apply the work-energy theorem:

Note: The amount of work done must balance the kinetic energy possessed by the car due to its motion.

From the work-energy theorem, we have:

[tex]Work\done = \Delta K.E\\\\Work\done = \frac{1}{2} MV^2[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = \frac{1}{2} \times 925 \times (26.39)^2\\\\Work\;done =462.5 \times 696.4321[/tex]

Work done = 322,099.85 Joules

Read more: https://brainly.com/question/22599382

Answer:

46 degrees

Explanation:

Answer:

because you are not only mixing the colors u are also mix the colors in side the colors for example if u take pink red and white and mix it with green blue and yellow it will make it darling because if the inside colors

Answer:

the answer is solid.

Explanation:

solid particles have a definite volume and shape therefore they cannot move are they are whole. the particles of solid are closely packed together, barely move, and barely vibrate.

Answer:

no

Explanation:

the inertia of an object does not make it to come to rest, this is normally caused by friction

Answer:

Sorry for the bad drawing, as you have not specified whether is should be open switch or close I have drawn both

I hope it helps.

This question involves the concepts of potential difference, inductance, and current.

The minimum time that should be allowed for the current to change is "0.694 ms".

The inductance of an inductor is given by the following formula:

[tex]E=L\frac{\Delta I}{\Delta t}\\[/tex]

where,

E = potential difference across the inductor = 360 volts

L = inductance of the inductor = 250 mH = 0.25 H

ΔI = change in current = 2.5 A - 1.5 A = 1 A

Δt = time required = ?

Therefore,

[tex]\Delta t = \frac{(0.25\ H)(1\ A)}{360\ volts}[/tex]

Δt = 6.94 x 10⁻⁴ s = 0.694 ms

Learn more about inductance here:

https://brainly.com/question/17431388?referrer=searchResults

Answer:

Newton found the acceleration of a body to increase with force and decreases with mass

fore example : a equal force applied on two different things that one of thing is have 100kg and another have70kg but the acceleration is different because the bigger one accelerate slower than the smaller because

[tex]f = ma[/tex]

Answer:

12,000,000 boxes

Explanation:

the volume of the room can be found by using the equation for volume of a rectangular box:V=LxWxH

where:

L=2m

W=3m

H=4m

(it doesn't really matter which is which since it is multiplication)

when we multiply our values (2m*3m*4m) we get 24cubic meters

now we need to convert cubic meters to cubic centimeters

each cubic meter is 1,000,000 cubic centimeter we multiply 24 by 1,000,000 and we get: 24,000,000 cubic centimeters (cc)

dividing 24,000,000 by 2 (since each box is 2cc) we get 12,000,000

so, we know we can fit 12,000,000, 2 cubic centimeter boxes in this room

Answer:

Explanation:

Ax= 20*sin37

Ay =20*cos37

Bx=15*cos40

By =  -15*sin40

Cx = -6*cos60

Cy = -6*sin60

Answer:

Ax = 12 cos 53

Ay = 12 sin 53

Bx = 15 cos 320 = 15 cos 40

By = 15 sin 320 = -15 sin 40

Cx = 6 cos 240 = -6 cos 60

Cy = 6 sin 240 = -6 sin 60

Answer:

An electric generator is a device that converts a form of energy into electricity.

Explanation:

Answer:

A

Explanation:

Answer:

6 newtons

Explanation:

If it's an equal force exerted on the student's hands, the object will not move.

If a student pushes on an object with a force of 6 newtons and the object does not move then the force exerted by the object on the student’s hands would be 6 Newtons because the applied force is equal to the static frictional force until the object does not move.

Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact

As given in the problem If a student pushes on an object with a force of 6 newtons and the object does not move then we have to find out the force exerted by the object on the student’s hands,

Force applied by the student of the object = 6 Newtons

The force exerted by the object on the student's hand = 6 Newtons

Thus, the force exerted by the object on the student’s hands would be 6 Newtons

Learn more about friction from here link given below;

brainly.com/question/24186853

#SPJ6

Answer:

Sunspots are places where the strong magnetic fields in the Sun resist the upward motion of bubbling hot gases from underneath

Explanation:

Answer:

B

Explanation:

Moment = force * perpendicular distance

Since the beam is balanced(equilibrium), the 2 moments will be equal.

30 * P = 70 * Q

The 2 combinations which achieve this equality is P = 21 and Q = 9

Answer:

Explanation:

The electromagnetic force, also called the Lorentz force, acts between charged particles, like negatively charged electrons and positively charged protons. Opposite charges attract one another, while like charges repel. The greater the charge, the greater the force.

Answer:

Fetus

Explanation:

the outsiders I got nuggets out of the elder and I get to make it in and I got I got

Answer:  

1 s

Explanation:

The speed of the sound, distance travelled and the time taken relationship is given as follows.

Speedofsound,v=Distancetravelled×Timetaken ----eqn 1

With the given values of wavelength = 50 cm = 0.5 m and frequency =1000 Hz, the speed of the wave is calculated as follows.

Speedofsound,v=Frequency(ν)×Wavelength(λ) -- eqn 2

That is, v=ν×λ=1000Hz×0.5m=500m/s

Substituting the value of the speed of sound in eqn 1 gives the time taken for the sound wave to travel a distance of 500 m.

That is, Timetaken=

Distancetravelled

Speedofsound

​

=

500m

500m/s

​

=1second.

Hence, the time taken for the sound wave to travel is 1 second.

The speed with which the waves will be travelling is 12.5m/s.

Given the data in the question;

Speed of the wave; [tex]v =\ ?[/tex]

To determine how fast the waves will be travelling, we use the expression for the relations between wavelength, frequency and speed of wave.

[tex]\lambda = \frac{v}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed of wave

We substitute our values into the equation

[tex]0.5m = \frac{v}{25s^{-1}} \\\\v = 0.5m * 25s^{-1}\\\\v = 12.5ms^{-1}[/tex]

Therefore, the speed with which the waves will be travelling is 12.5m/s.

Learn more: https://brainly.com/question/14667830

Answer:

We don't know how much it cost bc u didn't give us a number of how much one person cost or any details but if you add both of the balls together they have 1,400 balls

To calculate the cost of paintballing for Ryan and his dad, we need to know the cost per paintball. Once we have that information, we can multiply it by the total number of paintballs they used (700 balls each).

Let's say the cost per paintball is $0.50.

For Ryan:

Cost for Ryan = Cost per paintball × Number of paintballs used by Ryan

Cost for Ryan = $0.50/ball × 700 balls = $350

For his dad:

Cost for Dad = Cost per paintball × Number of paintballs used by Dad

Cost for Dad = $0.50/ball × 700 balls = $350

Total cost for both of them:

Total Cost = Cost for Ryan + Cost for Dad

Total Cost = $350 + $350 = $700

So, the total cost of paintballing for Ryan and his dad is $700, assuming the cost per paintball is $0.50.

To know more about paintball:

https://brainly.com/question/19052712

#SPJ3

Distance = 1/2 x velocity x time

Distance = 1/2 x 0.40 x 330

Distance = 66 meters

Answer:

the ground when the ball hits it

Explanation:

A ball falls freely towards the Earth. If the action force is the Earth pulling down on the ball, then identify which of the following best describe the reaction force:

Cuando el niño hace girar 0.7 vueltas por segundo una pelota de hule que se encuentra sujeta mediante un cordón de 0.75 m de longitud, tenemos que:

a) El periodo de la pelota es 1.43 segundos.

b) La velocidad lineal de la pelota es 3.3 m/s.

a) El periodo de la pelota está dado por:

[tex] T = \frac{2\pi}{\omega} [/tex]

En donde:

ω: es la velocidad angular

Dado que la pelota da 0.7 vueltas (revoluciones) cada segundo, la velocidad angular es:

[tex] \omega = \frac{0.7 \:rev}{s}*\frac{2\pi rad}{1 \:rev} = 4.40 rad/s [/tex]

Entonces, el periodo es:

[tex]T = \frac{2\pi}{\omega} = \frac{2\pi}{4.40 rad/s} = 1.43 s[/tex]

b) La velocidad lineal de la pelota se puede calcular usando la siguiente ecuación:

[tex] v = \omega r [/tex]

En donde:

r: es el radio de la circunferencia = longitud del cordón = 0.75 m

[tex]v = \omega r =4.40 rad/s*0.75 m = 3.3 m/s[/tex]

Por lo tanto, la velocidad lineal de la pelota es 3.3 m/s.

Puedes encontar mas aquí:

Espero que te sea de utilidad!

Answer:

1.5 g/cm

3

Let d be the density of fluid.

So , Initial reading of balance, F

1

=30dg N

After the level reaches 50cm

3

Final reading of balance , F

2

=50dg N

Given that difference between final and initial reading is 30g

i.e, F

2

−F

1

=30 g

⟹50dg−30dg=30g

⟹20dg=30g

⟹d=

20g

30g

⟹d=1.5g/cm

3

So, density of fluid is 1.5g/cm

3