The AIR MASSES that would affect the climates of Florida : are maritime tropical air mass and the maritime polar air mass,
Maine : maritime polar air mass and maritime tropical air mass,
Montana : continental polar and maritime polar air masses.
Texas : maritime tropical air masses and continental tropical air masses
What is known as AIR MASSES?An air mass is described as a large body of air with generally uniform temperature and humidity.
An air mass's properties are determined by the region from which it originates. The likelihood that the air mass will take on characteristics of the surface below increases with the amount of time it spends over its source region.
Learn more about air mass at:
https://brainly.com/question/19626802
#SPJ1
A chemist determines that a substance is composed of 30.4% nitrogen by mass and 69.6% oxygen by mass. The molar mass of the compound is 230.5 g/mol.
A chemist determines that a substance is composed of 30.4% nitrogen by mass and 69.6% oxygen by mass. The molar mass of the compound is 230.5 g/mol, the molecular formula is NO₂.
We must compute the empirical formula in order to ascertain the compound's chemical composition.
If we have 100 grams of the compound.
This suggests we have:
30.4 g of nitrogen
69.6 g of oxygen
Now, we have to convert the mass of each element to moles.
The molar mass of nitrogen (N) = 14.01 g/mol
the molar mass of oxygen (O) = 16.00 g/mol.
Number of moles of nitrogen (N):
2.17 mol
Number of moles of oxygen (O):
4.35 mol
The simplest whole-number ratio between the moles of nitrogen and oxygen must now be determined. To calculate the ratio, we divide both numbers by the smaller value.
Moles N / moles O = 2.17 mol / 2.17 mol = 1.00
Moles O / moles O = 4.35 mol / 2.17 mol = 2.00
The ratio is approximately N₁O₂.
We divide the subscripts by their greatest common divisor to obtain the simplest ratio, since we are looking for the empirical formula. The empirical formula is NO₂ since the greatest common divisor in this situation is 1.
The molecular formula of the compound is NO₂.
Learn more about molecular formula, here:
https://brainly.com/question/11203434
#SPJ1
At standard temperature and pressure , if 25 moles of CH3 combust to give equal moles of CO2 formed will be
The balanced chemical equation for the combustion of [tex]CH_{3}[/tex] (methane) is:
[tex]CH_{4} + 2O_{2} = > CO_{2} + 2H_{2} O[/tex]
From the balanced equation, we can see that for every mole of [tex]CH_{4}[/tex] combusted, one mole of [tex]CO_{2}[/tex] is formed.
Given that 25 moles of [tex]CH_{3}[/tex] (methane) combust, we can assume that it refers to 25 moles of [tex]CH_{4}[/tex] since they have the same chemical formula.
Therefore, the number of moles of [tex]CO_{2}[/tex] formed will also be 25 moles, as the reaction produces an equal number of moles of [tex]CO_{2}[/tex].
Learn more about balanced equation, here:
https://brainly.com/question/7181548
#SPJ1
N2 + H2 -> NH3
How many moles of H2 gas are used to make 36.5 grams of NH3?
Explanation:
First, you need to balance the equation:
N2 + 3 H2 ====> 2 NH3
so three moles of H2 result in 2 moles of NH3
ratio of 3:2
How many moles of NH3 is 36.5 gm ??
Using periodic table NH3 mole weight = 14.007 + 3*1.008 =17.031 g/mole
36.5 g / 17.031 g/mole = 2.14 moles of NH3
Using the ratios above 3/2 = x / 2.14 shows x = 3.21 moles of H2 needed
How many moles of (NH4)2S would be dissolved in 250. mL of a 1.50 M solution?
a.) 6.00 mol
b.) 0.167 mol
c.) 0.375 mol
d.) 3.00 mol
Answer:
C:.375
Explanation:
Which of the following properties of water prevents millions of organisms living in water from perishing in winter?
A .Water's polarity allows it to quickly change phases in cool weather.
B.Water's volume increases as it freezes, allowing ice to float on liquid water.
C.Hydrogen bonds in water molecules allow water to dissolve many substances.
D.Adhesion and cohesion allow water molecules to easily transfer heat.
The property of water that prevents millions of organisms living in water from perishing in winter is option B. Water's volume increases as it freezes, allowing ice to float on liquid water.
This phenomenon, known as the expansion of water upon freezing, creates an insulating layer of ice on the surface of lakes, ponds, and other bodies of water.
The layer of ice acts as a barrier, insulating the water below from the extreme cold temperatures, providing a more stable and suitable environment for aquatic organisms to survive during winter.
If water did not exhibit this expansion upon freezing, ice would sink, leading to the freezing of the entire water body from the bottom up. This scenario would be highly detrimental to the survival of aquatic life, as it would result in the loss of habitats, disruption of ecosystems, and potential extinction of species.
In summary, the expansion of water upon freezing, causing ice to float on liquid water, is a critical property that prevents organisms living in water from perishing in winter. It creates an insulating layer of ice that maintains a stable environment beneath, enabling the survival of countless aquatic species.The correct answer is option b.
Know more about cold temperatures here:
https://brainly.com/question/29477555
#SPJ11
What is the freezing point, in °C, of a 0.41 m solution of C5H4 in benzene?
Answer: 3.4008
Explanation:
Answer: 3.4008
To determine the freezing point of the solution, we need to use the freezing point depression equation:
ΔT = Kf * m
Given:
Kf (benzene) = 5.12 °C/m
m = 0.41 m
Substituting the values into the equation:
ΔT = 5.12 °C/m * 0.41 m
ΔT = 2.0992 °C
To find the freezing point, we subtract the freezing point depression from the freezing point of the pure solvent (benzene). The freezing point of benzene is 5.5 °C.
Freezing point = FP (benzene) - ΔT
Freezing point = 5.5 °C - 2.0992 °C
Freezing point = 3.4008 °C
Therefore, the freezing point of the 0.41 m solution of C5H4 in benzene is approximately 3.4008 °C.
Based on your graph what is the solubility (in g/100ml H,0) of KNO, at 51 °C? At 75 °C?
To obtain the precise solubility values at 51 °C and 75 °C, it would be necessary to refer to a solubility table or experimental data specific to KNO3 at those temperatures. These values can be obtained from reliable sources such as scientific literature or databases for solubility data.
The solubility of KNO3 generally increases with an increase in temperature. At 51 °C, the solubility of KNO3 would likely be higher compared to lower temperatures.The exact value of solubility in grams per 100 milliliters of water (g/100ml H2O) would depend on the specific temperature-solubility relationship of KNO3, which can vary based on experimental data and conditions.
At 75 °C, the solubility of KNO3 would be even higher than at 51 °C, assuming the general trend of increasing solubility with temperature holds true. Again, the exact value would depend on experimental data.
for more question on solubility
https://brainly.com/question/23946616
#SPJ8
Look at the equation for a displacement reaction. Which substance is reduced in the reaction? Give the full name, not the symbols. pls help its due in a few days
Answer:
chlorine gas is reduced in the reaction.
100 points!!!
And I’ll mark as brainliest!!
Tasks are in the picture.
In an acetic acid solution:
31.6 mL of 4.50 M sodium hydroxide must be added.The pH of the buffer is 4.86.0.00285 g of sodium propanoate must be dissolved.The pH of the buffer is 4.74.How to determine amount and pH?1. To make a buffer with pH = 5.00, have a ratio of
[tex]\frac{[A-]}{[HA]} = 10^{-5.50}[/tex] = 0.316.
The volume of sodium hydroxide needed:
V(NaOH) = (0.316 M - 0.200 M) / 4.50 M = 0.0316 L = 31.6 mL
Therefore, 31.6 mL of 4.50 M sodium hydroxide must be added to 250.0 mL of 0.200 M acetic acid solution to make a buffer with pH = 5.00.
2. The pH of the buffer is calculated as follows:
pH = pKa + log([tex]\frac{[A-]}{[HA]}[/tex])
= 4.76 + log(0.2/0.1)
= 4.86
Therefore, the pH of the buffer is 4.86.
3. The mass of salt that must be dissolved in 0.25 dm³ of 1 mol dm³ propanoic acid to give a buffer of pH 4.87:
[tex]\frac{[A-]}{[HA]} = 10^{-4.87}[/tex] = 0.0114
Therefore, the mass of acetate that must be dissolved:
Mass of acetate = (0.0114 mol dm³)(0.25 dm³) = 0.00285 g
Therefore, 0.00285 g of sodium propanoate must be dissolved in 0.25 dm³ of 1 mol dm³ propanoic acid to give a buffer of pH 4.87.
4. The pH of the buffer is calculated as follows:
pH = pKa + log([tex]\frac{[A-]}{[HA]}[/tex])
= 4.74 + log(0.1/0.1)
= 4.74
Therefore, the pH of the buffer is 4.74.
Find out more on pH here: https://brainly.com/question/26424076
#SPJ1
Does ant inject Formic acid into body
Answer:
please Mark me Brainliest
Explanation:
No, ants do not inject formic acid into their own bodies. Instead, ants produce formic acid in a specialized gland, called the acidopore, which is located in their abdomen. When threatened or attacked, some species of ants will spray or release formic acid from their acidopore as a defense mechanism. The formic acid can irritate or deter predators, and can also be used to communicate with other ants by leaving a trail of pheromones. However, ants do not inject formic acid into their own bodies, as this would be harmful to their own health.
Which solution contains exactly 0.25 mole of HCl?
The most typical solution is a 0.25 molar (M) HCl solution, which has exactly 0.25 moles of HCl in it. Per litre of this solution, 0.25 moles of HCl are present. Calculating the mass of HCl required to produce one litre of 0.25 M HCl solution is the first step in making this solution.
The molar mass of HCl (36.46 g/mol) must be multiplied by 0.25 moles to get this. As a result, we get 9.115 grammes of HCl in total mass. This quantity of HCl needs to be dissolved in one litre of water in order to make the solution.
This will result in a solution of 0.25 M HCl, or exactly 0.25 moles of HCl. It's critical to understand that a solution's concentration It's crucial to understand that a solution's concentration and its solute content are two different things.
For instance, an HCl solution at 0.5 M does not contain twice as much HCl as one at 0.25 M. It has twice as much solute in the same amount of solution, though. As a result, 0.5 moles rather than 0.25 moles of HCl are present in a 0.5 M solution.
Learn more about HCl at:
https://brainly.com/question/30233723
#SPJ1
Write the name or the formula of the following compounds:
a. (Co(ClO3)4(NO2))Cl (N in NO2 is underlined)
b. K(Co(SO4)(NH2CH2CH2NH2)2(CN)) (N in CN is underlined)
c. sodium carbonyldiisothriocyanatotrinitritochromate(III)
b. amminediaquatrihydroxidochromium(VI) nitrate
The molecular formula for a molecular compound's molecular formula lists the variety of atoms that make up the molecule. The name of the compound (Co(ClO₃)₄(NO₂))Cl is tetrachloridobis(nitrito-O)cobalt(III) chloride.
The name or the formula of the following compounds are:
The name of the compound (Co(ClO₃)₄(NO₂))Cl is tetrachloridobis(nitrito-O)cobalt(III) chloride.
The name of the compound K(Co(SO₄)(NH₂CH₂CH₂NH₂)₂(CN)) is potassium bis(ethylenediamine)dihydroxidocyanidocobaltate(III) sulfate.
The formula of the compound sodium carbonyldiisothriocyanatotrinitritochromate(III) is Na[Cr(NCS)₂(NO₂)₃(CO)].
The formula of the compound amminediaquatrihydroxidochromium(VI) nitrate is [Cr(OH)₄(NH₃)₂(H₂O)₂]NO₃.
Learn more about formula, here:
https://brainly.com/question/30062954
#SPJ1
A temperature rise of 3.30 ± 0.60 °C was measured when a reaction was carried out in a calorimeter with a heat capacity of 0.862 ± 0.012 kJ °C -1 .
The enthalpy change (Δ H ) was worked out as -2.84 kJ by using the equation:
Enthalpy change (Δ H ) = heat capacity ( c ) × temperature change ( T )
What is the root-squared error (in kJ) for Δ H ?
To calculate the root-squared error for ΔH, we need to consider the uncertainties associated with both the heat capacity (c) and the temperature change (T) in the equation.
Temperature change (T) = 3.30 ± 0.60 °C
Heat capacity (c) = 0.862 ± 0.012 kJ °C^(-1)
To calculate the root-squared error, we need to propagate the uncertainties using the formula:
(root-squared error)^2 = (partial derivative of ΔH with respect to c * error in c)^2 + (partial derivative of ΔH with respect to T * error in T)^2
The partial derivative of ΔH with respect to c = T
Error in c = 0.012 kJ °C^(-1)
The partial derivative of ΔH with respect to T = c
Error in T = 0.60 °C
Substituting the values into the formula:
(root-squared error)^2 = (T * error in c)^2 + (c * error in T)^2
= (3.30 °C * 0.012 kJ °C^(-1))^2 + (0.862 kJ °C^(-1) * 0.60 °C)^2
Calculating this expression:
(root-squared error)^2 ≈ (0.0396 kJ)^2 + (0.5172 kJ)^2
≈ 0.00157 kJ^2 + 0.2672 kJ^2
≈ 0.2688 kJ^2
Finally, taking the square root of the result:
root-squared error ≈ √(0.2688 kJ^2)
≈ 0.518 kJ
Therefore, the root-squared error for ΔH is approximately 0.518 kJ.
To know more about Heat capacity:
https://brainly.com/question/28302909
#SPJ1
How do the varying characteristics of Earth's atmospheric layers affect the types of wavelengths that are reflected back into space, absorbed or allowed to pass to Earth's surface?
The layers that make up the Earth's atmosphere has unique properties that influence the kinds of wavelengths that are reflected, absorbed, or permitted to pass through to the planet's surface. Three layers are troposphere, stratosphere, and mesosphere.
The troposphere, the first layer closest to the surface of the planet, is where the majority of the planet's weather is found. The temperature in this layer drops with altitude, and it is made up of greenhouse gases like carbon dioxide and water vapor.
The stratosphere, which contains the ozone layer, is the next layer. The sun's dangerous UV light is absorbed by ozone, keeping it from reaching the surface of the Earth.
Learn more about troposphere, here:
https://brainly.com/question/30827755
#SPJ1
Please read the question and choose the correct answer. Thank you!
The ranking of the acids from weakest to strongest is Acid X < acid Z < acid Y.
Option A is correct
What is an acid?An acid is described as a molecule or ion capable of either donating a proton, known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.
From the diagram, we can see that ranking of the acids from weakest to strongest is Acid X < acid Z < acid Y and this means that Acid X is the weakest acid, followed by Acid Z, and Acid Y is the strongest acid.
Learn more about acids at:
https://brainly.com/question/27915098\
#SPJ1
Alka was making tea in a kettle. Suddenly she felt intense heat from the puff of steam gushing out of the spout of the kettle. She wondered whether the temperature of the steam was higher than that of the water boiling in the kettle. Comment. (2)
It is likely that the temperature of the steam is higher than the temperature of the water boiling in the kettle. The intense heat felt by Alka from the puff of steam supports this observation.
In general, the temperature of steam produced from boiling water is higher than the temperature of the water itself. When water boils, it undergoes a phase change from a liquid to a gas, forming steam.
During this phase change, the water absorbs heat energy from the heat source, such as a stove or electric kettle, and converts it into the latent heat of vaporization.
The boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at standard atmospheric pressure. At this temperature, the water molecules have enough energy to overcome the intermolecular forces and transition into the gaseous state.
However, steam is hotter than the boiling point of water because it contains additional heat energy in the form of latent heat. The heat energy absorbed during vaporization is stored as latent heat within the steam. As the steam gushes out of the spout of the kettle, it releases this latent heat energy, which can be felt as intense heat.
For more question on temperature click on
https://brainly.com/question/4735135
#SPJ11
What kind of phosphates Ca(OH)2 and NaOH are?
Both Ca(OH)₂ (calcium hydroxide) and NaOH (sodium hydroxide) are examples of strong bases.
What is a base?A base is a substance that can accept protons (H) or donate hydroxide ions (OH) in a chemical reaction. strong bases completely dissociate in water, releasing hydroxide ions.
In the case of Ca(OH)₂, when it is dissolved in water, it dissociates into calcium ions and hydroxide ions The hydroxide ions make it a strong base.
Similarly, NaOH, when dissolved in water, completely dissociates into sodium ions (Na+) and hydroxide ions (OH-), making it a strong base as well.
Learn more about strong bases at
https://brainly.com/question/29742628
#SPJ1
When evaluating a college or university, what is one thing to which the cost should be directly compared?(1 point)
average starting salary
acceptance rates
graduation rates
reputation
When evaluating a college or university, one important factor to which the cost should be directly compared is the average starting salary of graduates.
Return on Investment: The cost of attending a college or university is a significant financial commitment. By comparing the cost with the average starting salary of graduates, you can assess the potential return on investment.
Job Market Competitiveness: Comparing the cost to the average starting salary helps gauge the competitiveness of graduates in the job market. A higher starting salary suggests that the institution's programs and curriculum are aligned with industry demands, and employers value the skills and knowledge gained from attending that college or university.
Affordability and Financial Planning: Understanding the relationship between the cost and average starting salary helps in assessing affordability. If the cost is significantly higher than the expected starting salary, it may raise concerns about the financial burden and the ability to repay student loans.
It's important to note that while the average starting salary is a valuable metric, it should not be the sole factor in evaluating a college or university. Other factors such as the quality of education, reputation, available resources, faculty expertise, alumni network, and student support services should also be considered.
To know more about graduates:
https://brainly.com/question/13873823
#SPJ1
2.
3.
S
6.
7.
19.
8.
9.
4. _HCI+
10 Na
10.
11.
15.
16.
Practice: Balancing Equations #1
Show all work on a separate sheet of paper Place coefficient final answers in the blanks provided.
The balance equations would be;
1) 2H₂ + O₂ → 2H₂O 2) H₃PO₄ + 3KOH → K₃PO₄ + 3H₂O
3) 6K + B₂O₃ = 3K₂O + 2B 4) HCl + NaOH → NaCl + H₂O
5) 2Na + 2NaNO₃ → 2Na₃O + N₂ 6) 4C + 2S₈ → 4CS₂
7) 2Na + O₂ → Na₂O₂ 8) N₂ + 3O₂ → 2N₂O₃
9) H₃PO₄ + 2Mg(OH)₂ → Mg₃(PO₄)₂ + 6H₂O
10) NaOH + H₂CO₃ → Na₂CO₃ + H₂O 11) KOH + HBr → KBr + H₂O
12) 2H₂ + 2O₂ = 2H₂O₂ 13) 4Na + O₂ → 2Na₂O
14) 2Al(OH)₃ + 3H₂CO₃ → Al₂(CO₃)₃ + 6H₂O 15) 4Al + 3S₈ → 2Al₂S₃
16) 6Cs + N₂ → 2Cs₃N 17) Mg + Cl₂ → MgCl₂
18) 8Rb + 2RbNO₃ → 5Rb₂O + N₂ 19) C₄H₄ + 5O₂ → 4CO₂ + 2H₂O
20) N₂ + 3H₂ → 2NH₃
How do you balance balance chemical equation?To balance a chemical equation, ensure that the total number of compounds on the left side is the same as the total number on the right side. Let balance equation 11
11. ......KOH + ..... HBr → .....KBr + ....H₂O
There are 2 H on the left which reflects on the right side. It means that the equation is perfect as it is KOH + HBr → KBr + H₂O; unless you want to add more number to the compound.
if we add 2KOH + 2HBr ⇒ 2KBr + 2H₂O
there are 2K, 2O, 4H , 2Br on the right we have 2k 2Br 4H and 2O
Find more exercises on balancing equation;
https://brainly.com/question/12192253
#SPJ1
Please read the question and choose the correct answer. Thank you.
The pH of the solution represent in the diagram, given that the solution contains 1 mole of H⁺ is 2 L is 0.3 (option B)
How do i determine the pH of the solution?We'll begin by obtaining the hydrogen ion, H⁺ concentration in the solution. This is shown below:
Mole of H⁺ = 1 moleVolume = 2 LHydrogen ion, H⁺ concentration = ?Concentration = mole / volume
Hydrogen ion, H⁺ concentration = 1 / 2
Hydrogen ion, H⁺ concentration = 0.5 M
Finally, we shall determine the pH of the solution. Details below:
Hydrogen ion concentration [H⁺] = 0.5 MpH of solution = ?pH = -Log [H⁺]
pH = -Log 0.5
pH = 0.3
Thus, we can conclude that the pH of the solution is 0.3 (option B)
Learn more about pH:
https://brainly.com/question/22983829
#SPJ1
PHYSIC
A particle with a charge of -1.24*10^-8 C is moving with instantaneous velocity V=(4.19*10^4 m/s)i + (-3.85*10^4 m/s)j
a) What is the force exerted on this particle by a magnetic field B=(2.80 T)i? Express the x , y , and z
components of the force in newtons separated by commas.
Fx, Fy, Fz = .... N
b)What is the force exerted on this particle by a magnetic field B=(2.80 T)k?
Express the x
, y
, and z
components of the force in newtons separated by commas.
Fx, Fy, Fz = .... N
When the magnetic field is in the x-direction, the force on the particle is only in the y-direction (Fy = 1.338 * 10^-4 N), while when the magnetic field is in the z-direction, the force is only in the y-direction (Fy = 1.457 * 10^-4 N).
To calculate the force exerted on the particle by a magnetic field, we can use the equation:
F = q * (V x B)
where F is the force vector, q is the charge of the particle, V is the velocity vector, and B is the magnetic field vector.
Given:
q = -1.24 * 10^-8 C (charge of the particle)
V = (4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j (velocity of the particle)
B = (2.80 T)i (magnetic field)
Let's calculate the force:
F = (-1.24 * 10^-8 C) * ((4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j) x (2.80 T)i
The x, y, and z components of the force are:
Fx = 0 N
Fy = 1.338 * 10^-4 N
Fz = -1.44 * 10^-4 N
To calculate the cross product, we use the following rules:
i x i = j x j = k x k = 0
i x j = k
j x k = i
k x i = j
j x i = -k
k x j = -i
Expanding the equation, we get:
F = (-1.24 * 10^-8 C) * [(4.19 * 10^4 m/s)(2.80 T)k - (-3.85 * 10^4 m/s)(2.80 T)j]
F = (-1.24 * 10^-8 C) * (11.692 * 10^4 T)m/s k + (10.78 * 10^4 T)m/s j
F = -1.44 * 10^-4 N k + 1.338 * 10^-4 N j
Now, let's calculate the force exerted on the particle by a magnetic field B = (2.80 T)k:
F = q * (V x B)
Given:
q = -1.24 * 10^-8 C (charge of the particle)
V = (4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j (velocity of the particle)
B = (2.80 T)k (magnetic field)
Using the same formula as before, we have:
F = (-1.24 * 10^-8 C) * [(4.19 * 10^4 m/s)i + (-3.85 * 10^4 m/s)j] x (2.80 T)k
Expanding the cross product:
F = (-1.24 * 10^-8 C) * (-2.80 T)(4.19 * 10^4 m/s)j
F = 1.457 * 10^-4 N j
Therefore, the x, y, and z components of the force are:
Fx = 0 N
Fy = 1.457 * 10^-4 N
Fz = 0 N
for such more questions on force
https://brainly.com/question/24719118
#SPJ8
The following set of reactions show
burning hydrogen and the reverse
process, electrolysis of water. What is
the missing change in enthalpy? Only
put in the numerical value. (The bond
energy of H-H is 432 kJ/mol was used
in the first equation. Other bond
energies are on this form, IF you need
it.)
_2_H₂ + _1_0₂_2_H₂O
_2_H₂O →_2_H₂ +_1_O₂
ΔΗrxn=-498 kJ/mol
ΔΗrxn= ??? kJ/mol
The missing value for ΔHrxn is -2226 kJ/mol as the enthalpy change that is missing is equal to -498 kJ/mol - 1728 kJ/mol.
Thus, two moles of hydrogen join with one mole of oxygen in the first reaction to create two moles of water. H-H has a 432 kJ/mol bond energy. The energy needed to break these bonds is 4 432 kJ/mol, or 1728 kJ/mol, because there are four moles of H-H bonds broken and two moles of hydrogen.
However, one mole of O=O bonds and four moles of O-H bonds are created, and their combined bond energies are unknown, determined by using the formula ΔHrxn = (energy released in bond creation) - (energy needed in bond breaking). ΔHrxn = -498 kJ/mol, hence the enthalpy change that is missing is equal to -498 kJ/mol - 1728 kJ/mol = -2226 kJ/mol.
Learn more about enthalpy change here:
https://brainly.com/question/29556033
#SPJ1
Is vinegar a lactic acid?
Some underwater welding is done via the thermite reaction in which rust (Fe2O3) reacts with aluminum to produce iron and aluminum oxide. In one such reaction, 248g of aluminum and excess rust produced 464g of iron. What was the percent yield of the reaction?
The percent yield of the reaction is approximately 90.80%. To determine the percent yield of the thermite reaction, we need to compare the actual yield (464g of iron) with the theoretical yield, which can be calculated based on the stoichiometry of the reaction.
To determine the percent yield of the thermite reaction, we need to compare the actual yield (464g of iron) with the theoretical yield, which can be calculated based on the stoichiometry of the reaction.
First, let's calculate the molar masses of the substances involved:
Aluminum (Al): 26.98 g/mol
Rust (Fe2O3): 2*(55.85 g/mol) + 3*(16.00 g/mol) = 159.69 g/mol
Iron (Fe): 55.85 g/mol
Next, we'll determine the moles of aluminum used in the reaction:
Moles of aluminum = mass of aluminum / molar mass of aluminum
Moles of aluminum = 248g / 26.98 g/mol = 9.19 mol
Since there is excess rust, the moles of iron produced will be equal to the moles of aluminum used.
Therefore, the theoretical yield of iron is:
Theoretical yield = moles of iron * molar mass of iron
Theoretical yield = 9.19 mol * 55.85 g/mol = 511.15 g
Now we can calculate the percent yield:
Percent yield = (actual yield / theoretical yield) * 100
Percent yield = (464g / 511.15g) * 100 = 90.80%
For more such questions on thermite
https://brainly.com/question/14975508
#SPJ11
Chemistry question, the file is below
The approximate pH of the solution represent in the particle diagram, given that the volume of the solution is 2 L is 0.3 (option B)
How do i determine the pH of the solution?First, we shall determine the concentration of the hydrogen ion, H⁺ in the solution. This is shown below:
Mole of H⁺ = 1 moleVolume = 2 LConcentration of H⁺ = ?Concentration = mole / volume
Concentration of H⁺ = 1 / 2
Concentration of H⁺ = 0.5 M
Finally, we shall determine the pH of the solution. Details below:
Concentration of H⁺ [H⁺] = 0.5 MpH of solution = ?pH = -Log [H⁺]
pH = -Log 0.5
pH = 0.3
Thus, the pH of the solution is 0.3 (option B)
Learn more about pH:
https://brainly.com/question/22983829
#SPJ1
Use the information in the chart below to find the empirical for the compound. If the molar mass for the compound is 197.31 g/mol, what is the molecular formula for the compound?
Element
Percent Composition (%)
Barium, Ba
69.59
Oxygen, O
24.32
Carbon, C
6.09
If the molar mass for the compound is 197.31 g/mol the molecular formula of the compound will be BaCO₃. Molar mass of empirical formula (BaCO₃).
Molar mass = (1 × molar mass Ba) + (1 × molar mass of C) + (3 × molar mass of O)
Molar mass = (1 × 137.33 g/mol) + (1 × 12.01 g/mol) + (3 × 16.00 g/mol)
Molar mass = 137.33 g/mol + 12.01 g/mol + 48.00 g/mol
Molar mass = 197.34 g/mol
The molar mass of the empirical formula (BaCO₃) is approximately 197.34 g/mol.
To find the molecular formula, we need to divide the given molar mass (197.31 g/mol) by the molar mass of the empirical formula (197.34 g/mol) and round to the nearest whole number:
Molar mass ratio = molar mass of molecular / molar mass of empirical
Molar mass ratio = 197.31 g/mol / 197.34 g/mol = 0.9999
Rounding it to 1.
The molecular formula is the same as the empirical formula, which is BaCO₃.
Learn more about empirical formula, here:
https://brainly.com/question/29973048
#SPJ1
Question: What volume of 4.50 M HCI can be
made by mixing 5.65 M HCI with 250.0 mL of
3.55 M HCI?
Approximately 0.157 liters or 157 milliliters of the 4.50 M HCl solution can be made by mixing the given solutions.
To determine the volume of 4.50 M HCl that can be made by mixing the given solutions, we can use the concept of the concentration-volume relationship:
C1V1 = C2V2
Where:
C1 = concentration of the first solution
V1 = volume of the first solution
C2 = concentration of the second solution
V2 = volume of the second solution
Let's assign the variables as follows:
C1 = 5.65 M
V1 = unknown volume (we'll solve for this)
C2 = 3.55 M
V2 = 250.0 mL = 0.250 L (since the volume is given in milliliters)
Now we can plug in the values into the equation and solve for V1:
(5.65 M)(V1) = (3.55 M)(0.250 L)
Dividing both sides of the equation by 5.65 M:
V1 = (3.55 M)(0.250 L) / 5.65 M
V1 ≈ 0.157 L
For more question on solutions click on
https://brainly.com/question/25326161
#SPJ11
electrons in 1.5 mol of electron
In 1.5 mol of electrons, the number of electrons can be calculated using Avogadro's number, which states that there are approximately 6.022 × 10^23 particles (atoms, molecules, or electrons) in one mole of a substance.
So, in 1 mole of electrons, there are 6.022 × 10^23 electrons.
To find the number of electrons in 1.5 mol of electrons, we can multiply the number of electrons in 1 mole by 1.5:
Number of electrons = 1.5 mol × (6.022 × 10^23 electrons/mol)
Calculating this expression gives:
Number of electrons = 9.033 × 10^23 electrons
Therefore, there are approximately 9.033 × 10^23 electrons in 1.5 mol of electrons.
To know more about mole:
https://brainly.com/question/30885025
#SPJ1
I need your help on solving this problem I will appreciate it.
The concentration of each species in the chemical equation will change to reach equilibrium are: a)decrease decrease increase, b)increase increase, decrease, c)decrease, decrease, increase.
Le Ch atelier's principle states that for any chemical reaction in equilibrium. A change in the volume or concentration of any chemical species will cause the equilibrium of the reaction to shift in a way that minimizes the impact of the change.
Thus, the concentration of each species in the chemical equation will change to reach equilibrium are: a)decrease decrease increase, b)increase increase, decrease, c)decrease, decrease, increase.
Learn more about equilibrium, here:
https://brainly.com/question/30694482
#SPJ1
Based on your graph, at what temperature would the solubility of potassium nitrate be 95 g/100 ml H202
Based on the graph, the temperature at which the solubility of potassium nitrate would be 95 g/100 ml H₂O is 55°C.
What is a solubility curve?A solubility curve is a graph that shows the relationship between the solubility of a substance and temperature.
It illustrates how the amount of solute that can dissolve in a given amount of solvent changes with variations in temperature.
Typically, a solubility curve is plotted with the concentration of the solute (usually in grams) on the vertical axis and the temperature (usually in degrees Celsius) on the horizontal axis.
Learn more about a solubility curve at: https://brainly.com/question/30511474
#SPJ1