Decide which element probably forms a compound with hydrogen that has a chemical formula most and least similar to the chemical formula of the compound formed by hydrogen and sulfur.

Answer:

powder

Explanation:

Between the powder and marble chips, the powder will have a larger surface area.

For the same masses of a solid substance in different forms such as lump, granules or powder, the smaller particle size of each form the larger the surface area.

Surface area increases from lumps to granules and them powder

Answer: The possible molecular formula will be [tex]CO_2[/tex]

Explanation:

Mass of C= 27.3 g

Mass of O = 72.7 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{27.3g}{12g/mole}=2.275moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{72.7g}{16g/mole}=4.544moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{2.275}{2.275}=1[/tex]

For O =[tex]\frac{4.544}{2.275}=2[/tex]

The ratio of C : O = 1: 2

Hence the empirical formula is [tex]CO_2[/tex]

The possible molecular formula will be=[tex]n\times CO_2[/tex]

Answer:

Element is made from same type of atoms

While atom is present in element made up of different particles like proton neutrons electron etc

Explanation:

Number of particles inside a sugar bowl = 4.4 x 10²³

Given

The molar mass of sugar = 342.3 g/mol

mass of sugar = 250 g

Required

Number of particles

Solution

1 mol = 6.02 x 10²³ particles

mol of sugar :

[tex]\tt mol=\dfrac{mass}{molar~mass}[/tex]

mol = 250 g : 342.3 g/mol = 0.73 mol

Number of particles :

N = n x No

N = 0.73 x 6.02 x 10²³

N = 4.39 x 10²³ ≈ 4.4 x 10²³

Answer:

See explanation.

Explanation:

Hello!

In this case, since the antacid is usually composed by the following bases:

- Calcium, magnesium and aluminum hydroxides.

- Hydrogen sodium carbonate.

- Sodium carbonate.

In such a way, the feasible reactions that undergo when they react with the stomach acid are shown on the attached picture. As you can see, they all have in common the formation of chlorides and water, which are the neutralization products that calm down the acidity as they are neutral.

Best regards!

An acid and a base which differ from each other by a proton are said to form a conjugate pair. The conjugate base of HSO₃⁻ is SO₃²⁻. The correct option is C.

The entity produced when an acid gives up a proton has a tendency to regain the proton and hence it behaves as a base. It is called the conjugate base of the parent acid.

The entity produced when a base accepts a proton has a tendency to donate the proton and hence behaves as an acid. It is called the conjugate acid of the parent base.

Sulfur dioxide dissolved in water gives sulfurous acid H₂SO₃. The conjugate base of this material contains one proton less i.e, HSO₃⁻ and the conjugate base of the substance bisulfite is SO₃²⁻which is sulfite ion.

Thus the correct option is C.

To know more about conjugate base, visit;

https://brainly.com/question/30225100

#SPJ6

Answer:

B) 2

Explanation:

There are two significant figures in given measurement,

2, 0

Significant figures:

1= The given measurement have four significant figures 1534.

2= All non-zero digits are consider significant figures like 1, 2, 3, 4, 5, 6, 7, 8, 9.

3= Leading zeros are not consider as a significant figures. e.g. 0.03 in this number only one significant figure present which is 3.

4= Zero between the non zero digits are consider significant like 107 consist of three significant figures.

5= The zeros at the right side e.g 2400 are also significant. There are four significant figures are present.

Answer:

Neutrons

Explanation:

Subatomic particles are components atoms, and they include protons, electrons and neutrons. In different isotopes of an atom, the number of neutrons that the atom contains is what changes.

I hope this helps!

Answer:

V = 93.0 L

Explanation:

Hello!

In this case, when computing the PVT properties for an ideal gas, we need to use the following equation:

[tex]PV=nRT[/tex]

In such a way, for 2.5 x 10²⁴ molecules of chlorine at STP (273.15 K and 1.00 atm) we first need the moles based on the Avogadro's number:

[tex]n = 2.5x10^{24}molec*\frac{1mol}{6.022x10^{23}molec} = 4.15mol[/tex]

Now, we solve for volume on the ideal gas equation to obtain:

[tex]V=\frac{nRT}{P}[/tex]

So we plug in and get:

[tex]V=\frac{4.15mol**0.08206\frac{atm*L}{mol*K}*273.15K}{1.00atm}\\\\V=93.0L[/tex]

Best regards!

Answer:

[tex]P=34.8atm[/tex]

Explanation:

Hello!

In this case, since the tank has a constant volume as well as temperature, we would be able to compute the resulting pressure via:

[tex]P=\frac{n_TRT}{V}[/tex]

Whereas the total moles are computed by adding the moles of each gas as shown below:

[tex]n_{CH_4}=250gCH_4*\frac{1molCH_4}{16.05gCH_4}=15.6molCH_4\\\\n_{CO_2}=190g CO_2*\frac{1molCO_2}{44.01gCO_2}=4.32molCO_2\\\\n_T= 15.6molCH_4+4.32molCO_2\\\\n_T=19.9mol[/tex]

Thus, we plug in the total pressure, temperature and volume to get the resulting pressure:

[tex]P=\frac{19.9mol*0.08206\frac{atm*L}{mol*K}*298K}{14.0L}\\\\P=34.8atm[/tex]

Best regards!

Answer:

I

Explanation:

d

k

uhm....is there anything you need help with?

Answer:

Cell division.

Explanation:

Answer:

C. 96,657 Pa, 966 millibar, 725 Torr

Explanation:

The pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.

Pressure is defined as the force that is applied perpendicularly to an object's surface in relation to the area that it is dispersed over. Pressure can actually be a very good thing. Stress only occurs and has a fully negative impact when it continues to grow and that sensation of serenity and order is replaced with one of being out of control.

Given pressure = 725 mmHg

1 mmHg = 133.32 Pa

725 mmHg = 133.32 x 725 Pa

                  = 96,657 Pa

1 mmHg = 1.333 millibar

725 mmHg = 725 x 1.333 millibar

                   = 966 millibar

1 mmHg = 1 torr

725 mmHg = 725 Torr

Thus, the pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.

To learn more about pressure, refer to the link below:

https://brainly.com/question/15175692

#SPJ2

Answer:

Number of unpaired electrons

Explanation:

We know that for the compounds listed, the nature of the electrons in the d orbitals affects their interaction with an applied magnetic field.

If there are unpaired d electrons present, the compound is paramagnetic and is more strongly attracted to a magnetic field.

Similarly, if there are paired d electrons, the compound is diamagnetic and is less strongly attracted to a magnetic field.

Answer:

its 2

Explanation:

Answer and Explanation:

The chemical formula for cobalt(II) bromide is CoBr₂. As it is a strong electrolyte, it dissociates into ions when dissolved in water, according to the following chemical equation:

CoBr₂(s) → Co²⁺(aq) + 2 Br⁻(aq)

Thus, the compound CoBr₂ dissociates in water producing 1 mole of cobalt(II) ions (Co²⁺) and 2 moles of bromide ions (Br⁻) per mole of CoBr₂. The ions are dissolved in water, so they are in the aqueous state (aq).

Answer:

C3H8 + 5O2 ‐‐‐‐‐‐‐‐> 4H2O + 3CO2

Answer:

Reflection

Explanation:

The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.

Answer:

4-Methyl-1-pentene

Explanation:

According to  the International Union of Pure and Applied Chemistry (IUPAC), IUPAC nomenclature of organic chemistry is defined as the system of naming organic chemical compounds.

There are certain rules for naming organic chemical compounds as per IUPAC. The name of given (CH3)2CHCH2CH=CH2 will be based on the same rules.

4-Methyl-1-pentene is the name of this chemical, as methyl is in 4th carbon position, Pent for 5 carbon chain and -ene (suffix) for one double bond).

Hence, the correct answer is "4-Methyl-1-pentene".

Answer:

26

Explanation:

The number of electrons and protons are equal.

Answer:

The molar mass and molecular weight of C3H6O is 58.0791.

Explanation:

Answer:

MP hippopotamus

Explanation: I'm in the fifth grade so yeah I really don't know this so I'm just going to say some random stuff and white cheddar mac and cheese warm TV perfect back MD 11443 to 2885 eleven 12:20 to 11 132 0.24 answer

Answer:

62.9%

Explanation:

Step 1: Given data

Step 2: Calculate the mass lost of water

We will use the following expression.

mH₂O = mNa₂CO₃.xH₂O - mNa₂CO₃

mH₂O = 71.5 g - 26.5 g = 45.0 g

Step 3: Calculate the percent of water in the hydrate sodium carbonate

We will use the following expression.

%H₂O = mH₂O / mNa₂CO₃.xH₂O × 100%

%H₂O = 45.0 g / 71.5 g × 100%

%H₂O = 62.9%

Answer:

plants

Explanation:

because it produces ( i am a third grade student and don't know if it is right or not)

Answer:

maile pani aii khojeko tmle sideko dekhya ani thicheko ani comment garya haha

Answer:

0.670 mol

Explanation:

Step 1: Write the balanced reaction for the decomposition of alumina

2 Al₂O₃ ⇒ 4 Al + 3 O₂

Step 2: Calculate the moles corresponding to 34.2 g of Al₂O₃

The molar mass of Al₂O₃ is 101.96 g/mol.

34.2 g × 1 mol/101.96 g = 0.335 mol

Step 3: Calculate the moles of Al produced from 0.335 moles of Al₂O₃

The molar ratio of Al₂O₃ to Al is 2:4.

0.335 mol Al₂O₃ × (4 mol Al/2 mol Al₂O₃) = 0.670 mol Al