Consider a random variable that can take values {1,2,3,4,5,6,7} with probabilities 0.1,0.1,0.15,0.15,0.15,0.15,0.2. How many bits, on average, will be required to encode this source using a Huffman code? a) 2.500 bits b) 2.771 bits c) 2.800 bits d) 3.771 bits

Answer:

138°

235°

240°

Step-by-step explanation:

The first situation shows a straight angle, so the smaller angles that make it up should be supplementary. That means that their measures add up to 180°. My work for this first situation is shown below:

n + 42° = 180°
n + 42° - 42° = 180° - 42°
n = 138°

Now, let's look at the second situation. This one's pretty simple. It's just asking us to add up the measures of all the angles are given, so all we have to do is some addition, shown below:

23° + 40° + 92° + 80° = 235°

Finally, we're at the last situation. This situation shows a full angle, so the smaller angles that make it up should add up to 360°, since this is the amount of degrees in a full circle. Again, if we know the measure of one of these angles, we should be able to find the measure of the other one. See my work below:

n + 120° = 360°
n + 120° - 120° = 360° - 120°
n = 240°

And there are all your answers! Let me know if you need further clarification on all that. :)

To find a root-finding method with a third order of convergence, consider using the "Halley's method." Halley's method is an iterative numerical technique used for finding roots of a function. It has a third-order convergence, meaning the number of correct digits approximately triples with each iteration, resulting in a faster convergence rate compared to methods with lower orders of convergence.

Here's a step-by-step explanation of Halley's method:

1. Choose an initial guess x_0 for the root of the function f(x).

2. Calculate the first and second derivatives of the function f(x), denoted as f'(x) and f''(x), respectively.

3. Update the guess using the formula:
  x_(n+1) = x_n - (2 * f(x_n) * f'(x_n)) / (2 * (f'(x_n))^2 - f(x_n) * f''(x_n))

4. Check for convergence by comparing the difference between consecutive guesses (x_(n+1) - x_n) to a predefined tolerance level.

5. If the convergence criterion is not met, repeat steps 3 and 4 until convergence is achieved or a maximum number of iterations is reached.

convergencehttps://brainly.com/question/30089745

#SPJ11

(a) The probability that all 4 missiles will fire is 0.2098 and (b) The probability that at most 2 will not fire is 0.0099.

Here we need to use the concept of combinations to get our required answer.

Here we have been given that 4 out of 14 missiles are defective.

Hence 10 missiles are working.

A sample of 4 missiles was chosen

Hence the simple can be chosen in ¹⁴C₄ ways

a)

The probability that all 4 missiles will fire is

¹⁰C₄/¹⁴C₄

= 0.2098

b)

The probability that at most 2 will not fire is

1 - the probability of including all three defective missiles

= 10³C₃/¹⁴C₄

= 0.0099

To learn more about Probability visit

https://brainly.com/question/30034780

#SPJ4

(a) Probability all 4 fire: 0.3297. (b) Probability at most 2 not fire: 0.9591.

(a) To track down the chance that all of the 4 rockets will fire, we actually need to do not forget the quantity of methods we can select 4 operating rockets out of the eleven that are not unsuitable, isolated by the all out range of approaches we will select four rockets out of the whole component.

The amount of ways of selecting four operating rockets out of the eleven that aren't improper is given by way of the combination recipe:

C(eleven,four) = 330

The absolute quantity of methods of selecting four rockets out of the entire part is given via:

C(14,4) = 1001

Subsequently, the chance that each one of the four rockets will hearth is:

P(all four hearth) = C(11,four)/C(14,4) = 330/1001 ≈ zero.3297

(adjusted to 4 decimal spots)

(b) To find the likelihood that at most 2 rockets might not fire, we need to remember every one of the potential conditions in which 0, 1, or 2 poor rockets are selected, and afterward song down the likelihood of every case and upload them up.

Case 1: No defective rockets are selected

The amount of ways of selecting four working rockets out of the eleven that are not faulty is given through the mixture recipe:

C(11,four) = 330

Subsequently, the chance of choosing no defective rockets is:

P(0 inadequate) = C(eleven,4)/C(14,four) ≈ 0.3297

Case 2: One defective rocket is chosen

The quantity of ways of selecting three operating rockets out of the eleven that are not poor is given with the aid of the combo equation:

C(eleven,three) = 165

The amount of ways of selecting 1 damaged rocket out of the three that are available is given through the mix equation:

C(three,1) = 3

Subsequently, the all out number of approaches of selecting 1 insufficient and three running rockets is:

C(eleven,three) × C(3,1) = 495

Thusly, the probability of choosing one deficient rocket and three running rockets is:

P(1 deficient) = C(eleven,three) × C(three,1)/C(14,4) ≈ 0.4655

Case three: Two poor rockets are selected

The amount of approaches of choosing 2 poor rockets out of the three which might be handy is given through the combination recipe:

C(3,2) = 3

The amount of ways of choosing 2 running rockets out of the 11 that aren't faulty is given via the mix recipe:

C(11,2) = 55

In this way, the all out number of methods of selecting 2 broken rockets and 2 working rockets is:

C(3,2) × C(eleven,2) = one hundred sixty five

Subsequently, the chance of choosing two incorrect rockets and two operating rockets is:

P(2 insufficient) = C(3,2) × C(11,2)/C(14,four) ≈ 0.1638

Subsequently, the likelihood that at maximum 2 rockets might not fireplace is:

P(at maximum 2 don't fire) = P(zero imperfect) + P(1 blemished) + P(2 deficient) ≈ 0.9591

(adjusted to 4 decimal spots).

To learn more about probability, refer:

https://brainly.com/question/1581511

#SPJ4

The expression is equivalent to 4 − 3(x + 2) + 2(3 − 2x) will be 4 − 7x. Then the correct option is A.

Given that:

Expression, 4 − 3(x + 2) + 2(3 − 2x)

The equivalent is the expression that is in different forms but is equal to the same value.

Simplify the expression, then we have

4 − 3(x + 2) + 2(3 − 2x)

4 − 3x − 6 + 6 − 4x

4 − 7x

Thus, the correct option is A.

More about the equivalent link is given below.

https://brainly.com/question/889935

#SPJ1

The missing options are given below.

4 − 7x

4 + 7x

7 − 4x

7 + 4x

To diagonalize C, we first need to find its eigenvalues and eigenvectors. The characteristic equation for C is det(C -

                                λI)  =  0, which gives us (1 - λ)(7 - λ)  -  6  =                                

                                   0. Solving for λ, we get λ1  =  1 and λ2  =                                    

               7. To find the eigenvector corresponding to λ1, we solve the system of equations (C -                

                   λ1I)x  =  0, which gives us the equation  - x1  +  2x2  =  0. Choosing x2  =                    

                                           1, we get the eigenvector v1  =                                          

                            [2,1]. Similarly, for λ2 we get the eigenvector v2  =  [1, -                            

                              1]. We can then diagonalize C by forming the matrix P  =                              

                         [v1, v2] and the diagonal matrix D  =  [λ1 0; 0 λ2]. We have C  =                        

                      -                                    -                                                        

                   PDP 1. To compute A5, we first compute C 1 as [7  - 2;  - 3 1] / 4. Then, A  =                    

                         -         -   -                                  5       5       5                          

                      CDC 1  =  PDP 1DC 1P. We have D  =  [1 0; 0 7], so D   =  [1  0; 0 7 ]  =                      

                                           5       5 -                                                              

                    [1 0; 0 16807]. Thus, A   =  PD P 1  =  [2 1; 1  - 1][1 0; 0 16807][1 / 3  -                    

                              1 / 3; 1 / 3 2 / 3]  =  [11203 11202; 16804 16805] / 9.                                

For more questions on diagonalisation - https://brainly.com/question/29537939

#SPJ11

The radius of the circle represented by the equation x² + y² - 4x - 8y - 16 = 0 is given as follows:

6 units.

The equation of a circle of center [tex](x_0, y_0)[/tex] and radius r is given by:

[tex](x - x_0)^2 + (y - y_0)^2 = r^2[/tex]

The equation for this problem is given as follows:

x² + y² - 4x - 8y - 16 = 0.

To obtain the radius of the circle, we must complete the squares from the equation, as follows:

x² - 4x + y² - 8y = 16

(x - 2)² + (y - 4)² = 16 + 2² + 4²

(x - 2)² + (y - 4)² = 36.

Hence the center and the radius of the circle are given as follows:

More can be learned about the radius of a circle at https://brainly.com/question/24375372

#SPJ1

Answer: 1: C=72.3822947387, A=416.560184761, 2: C=37.6991118431, A=113.097335529

Step-by-step explanation:

For the first circle, since the area of a circle is equal to pi multiplied by the radius squared, we can use this equation:

[tex]\pi11.52^{2}[/tex]

Now we can multiply the radius by 2 to get the diameter, which is 23.04, and multiply the diameter by pi to get the circumference, 72.3822947387.

If you want an exact circumference, all you need to do is display the diameter multiplied by pi without simplification, which would look like this:

23.04π.

We can do the same thing for the second circle. Because we already have the diameter, I will start with the circumference.

12pi = 37.6991118431, which is just simplified to 12pi. The reason you want to have pi in your answer for an exact answer, is because otherwise your answer would have to be an irrational decimal constant, which cannot fit on one page.

Now for the area of the second circle. Divide the diameter by 2, and multiply pi by the radius squared. This is an equation that would look something like this:

[tex]\pi6^{2}[/tex], which can simplify to [tex]\pi36[/tex] as an exact answer.

Answer:

The density graph for all possible temperatures from 60 degrees to 160 degrees can be used to find the probability of a temperature falling within a certain range.

Option (A) is incorrect because it includes temperatures that are outside the range of the graph.

Option (B) is incorrect because it includes temperatures that are outside the range of the graph.

Option (C) is incorrect because it includes temperatures that are outside the range of the graph.

Option (D) is the only option that falls within the range of the graph. Therefore, the density graph can be used to find the probability of a temperature from 90 degrees to 120 degrees, which is option (D).

Step-by-step explanation:

If the economy starts to weaken and the FOMC determines that employment is falling short of maximum employment, an appropriate policy implementation would be to lower the interest on reserve balances rate, ON RRP offering rate, and discount rate.

This would make it cheaper for banks to borrow money and encourage them to lend more, which could stimulate economic activity and create more job opportunities. Option c, Lower the interest on reserve balances rate, ON RRP offering rate, and discount rate, is the best answer. The other options are not as effective in this scenario - raising rates would likely make it more expensive for businesses and consumers to borrow money, which could further slow down the economy, while using open market operations to decrease reserves could lead to a shortage of liquidity in the banking system.

Know more about FOMC here:

https://brainly.com/question/3650924

#SPJ11

(a) The dependent variable is the number of accidents, y. The independent variable is the difference between the width of the bridge and roadway, x.

(b) To estimate the number of accidents if the difference of the width is 8 feet, we substitute x = 8 into the regression equation:

y = 74.7 - 6.44(8) = 24.58

Therefore, we estimate that there would be 24.58 accidents if the difference of the width is 8 feet.

As for the earlier question, the answer would be:

We need to calculate the test statistic to determine if we can reject the null hypothesis. The test statistic is calculated as:

test statistic = (sample mean - null hypothesis value) / (standard error of the sample mean)

Since the question does not provide any sample mean or standard error, we cannot calculate the test statistic. Therefore, we cannot determine if we can reject the null hypothesis based on the critical value alone.

https://brainly.com/question/31700335

#SPJ11

Answer: 6000

Step-by-step explanation:

For the numbers you choose, there are 10, then 20, then 30 possible numbers to choose from.

To find the total amount of possible combinations with repetition, you just do 10x20x30 = 6000.

Answer:

x = 3/2 or 1.5

Step-by-step explanation:

[tex]ax^2+bx+c[/tex]

[tex]x=\frac{-b+/-\sqrt{b^2-4ac} }{2a}[/tex], where x is the root(s)

[tex]b^2-4ac[/tex]

(a.) For 4x^2 + 16x - 9b, 4 is our a value, 16 is our b value and -9 is our c value:

[tex]16^2-4(4)(-9)\\256+144\\400 > 0[/tex]

(b.) For 2x^2 + 80x + 400, 2 is our a value, 80 is our b value, and 400 is our c value:

[tex]80^2-4(2)(400)\\6400-3200\\3200 > 0[/tex]

(c.) For x^2 - 6x - 9, 1 is our a value, -6 is our b value and -9 is our c value

[tex](-6)^2-4(1)(-9)\\36+36\\72 > 0[/tex]

(d.) For 4x^2 - 12x + 9, 4 is our a value, -12 is our b value, and 9 is our c value:

[tex](-12)^2-4(4)(9)\\144-144\\0=0[/tex]

[tex]x=\frac{-(-12)+/-\sqrt{(-12)^2-4(4)(9)} }{2(4)}\\ \\x=\frac{12+/-\sqrt{0} }{8} \\\\x=12/8=3/2\\or\\x=1.5[/tex]

The best data set that represents the histogram is (4, 5, 7, 8, 12, 13, 15, 18, 19, 21, 24, 25, 26, 28, 29, 30, 32, 33, 35, 42, option C is correct.

From the histogram, we can see that there were 3 data points in the interval 1-10, 3 data points in the interval 11-20, 7 data points in the interval 21-30, 4 data points in the interval 31-40, and 3 data points in the interval 41-50.

Therefore, the best data set that represents the histogram is the one that has 3 data points in the range 1-10, 3 data points in the range 11-20, 7 data points in the range 21-30, 4 data points in the range 31-40, and 3 data points in the range 41-50.

4, 5, 7, 8, 10, 12, 13, 15, 18, 21, 23, 28, 32, 34, 36, 40, 41, 41, 42, 42 does not fit this pattern since it has more than 3 data points in some of the intervals.

4, 7, 10, 13, 14, 19, 22, 24, 26, 27, 29, 31, 33, 35, 36, 38, 40, 42, 42, 42 also does not fit the pattern since it has more than 3 data points in some of the intervals.

4, 5, 7, 8, 12, 13, 15, 18, 19, 21, 24, 25, 26, 28, 29, 30, 32, 33, 35, 42 fits the pattern and has 3 data points in each interval. This is the correct answer.

4, 6, 9, 12, 16, 18, 21, 24, 25, 26, 28, 29, 30, 32, 35, 36, 38, 41, 41, 42 does not fit the pattern since it has more than 3 data points in some of the intervals.

Therefore, the best data set that represents the histogram is  (4, 5, 7, 8, 12, 13, 15, 18, 19, 21, 24, 25, 26, 28, 29, 30, 32, 33, 35, 42

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ1

No, the value would not be included if we want at most 4. In statistics, a variable is a characteristic or attribute that can be measured or observed.

A random variable is a variable whose value is determined by chance or probability. The possible values of a random variable are called its values. In this case, the random variable X has possible values of 1-6. If we want at most 4, this means we want all the values of X that are less than or equal to 4. Therefore, the value in question (which we don't know) would only be included if it is less than or equal to 4. If it is greater than 4, then it would not be included. To summarize, whether the value of X is included or not depends on whether it is less than or equal to 4, which is the condition we have set.

Learn more about variable here:

brainly.com/question/29691945

#SPJ11

The appropriate inference procedure based on the statistical study aim and the sample size, is the option;

t confidence interval for a difference in means

The sample size is the number of elements in the sample.

The details of the data are;

The aim of the study = To seek the difference in the mean fuel economy (measured in miles per gallon) for vehicles under two treatment

1) Driving with under inflated tyres

2) Driving with properly inflated tyres

The number of cars in the sample = 12 (6 for each test)

The appropriate inference procedure, for the above data and test aim, therefore is the test for the confidence interval for the difference in means, and the sample size of less than 30, indicates that the is the student t confidence interval, the correct option is therefore;

t confidence interval for a difference in means

Learn more on the confidence interval in inferential statistics here: https://brainly.com/question/17097944

#SPJ1

The equation of the line of best fit is y = 0.883x + 17.95.

We have,

To find the line of best fit, we want to find the equation of the line that comes closest to passing through all the points in the scatterplot.

One way to do this is to use linear regression analysis.

Using a calculator or statistical software,

We can find that the equation of the line of best fit for this data is:

y = 0.883x + 17.95

Thus,

The equation of the line of best fit is y = 0.883x + 17.95.

Learn mroe about scatterplots here:

https://brainly.com/question/30017616

#SPJ1

The solution is, the probability that exactly two of the dice show an even number is 0.3125.

We will use the Binomial Probability formula to find the answer

The formula is given by ⁿCₓ (p)ˣ (1-p)ⁿ⁻ˣ

Where:

n, the number of trials = 5

x, the number of success that we aim = 2

p, the probability of success = 0.5 ⇒ there are six out of twelve numbers on the dice that are even

Substitute these values into the formula, we have

P(2) = ⁵C₂ (0.5)² (1-0.5)⁵⁻²

P(2) = ⁵C₂ (0.5)² (0.5)³

P(2) = 0.3125

The solution is, the probability that exactly two of the dice show an even number is 0.3125.

To learn more on probability click:

brainly.com/question/11234923

#SPJ1

complete question:

Ben rolls 5 fair 12-sided dice. the 12 faces of each die are numbered from 1 to 12. what is the probability that exactly two of the dice show an even number?

Vinny's new grade in math, if the playing time reduces to 6 hours per week, would be 85.33.

If we wish to illustrate how Vinny's Math Models grade relates to the amount of time she spends playing computer games, we may employ the formula that defines an inverse proportion:

k = G x T

k = 64 x 8 = 512

For 6 hours playing:

512 = G x 6

G = 512 / 6

= 85. 33

Find out more on proportionality at https://brainly.com/question/29465808

#SPJ1

The different ways to choose the ones digit A are:

- A can be any digit if the sum of the first 6 digits is divisible by 3.
- A can be 2, 5, or 8 if the sum of the first 6 digits leaves a remainder of 1 when divided by 3.
- A can be 1, 4, 7, or 0 if the sum of the first 6 digits leaves a remainder of 2 when divided by 3.

To determine if a number is divisible by 3, we can add up the digits and check if the sum is divisible by 3. For the number 572435A, the sum of the first 6 digits is 5 + 7 + 2 + 4 + 3 + 5 = 26. We need to add a number A to this sum to make it divisible by 3.

There are three possible scenarios to make the sum divisible by 3:

1. If the sum of the first 6 digits is already divisible by 3, then any digit A can be added to the end to make the number divisible by 3. In this case, the sum of the first 7 digits will also be divisible by 3.

2. If the sum of the first 6 digits leaves a remainder of 1 when divided by 3, then A must be 2, 5, or 8. Adding any other digit to the end will result in a sum that is not divisible by 3. In this case, adding 2, 5, or 8 to the end of the number will result in a sum of digits that is divisible by 3.

3. If the sum of the first 6 digits leaves a remainder of 2 when divided by 3, then A must be 1, 4, 7, or 0. Adding any other digit to the end will result in a sum that is not divisible by 3. In this case, adding 1, 4, 7, or 0 to the end of the number will result in a sum of digits that is divisible by 3.

Therefore, the different ways to choose the ones digit A in the number 572435A so that the number will be divisible by 3 are:

- A can be any digit if the sum of the first 6 digits is divisible by 3.
- A can be 2, 5, or 8 if the sum of the first 6 digits leaves a remainder of 1 when divided by 3.
- A can be 1, 4, 7, or 0 if the sum of the first 6 digits leaves a remainder of 2 when divided by 3.

To learn more about permutations visit : https://brainly.com/question/1216161

#SPJ11

Answer: i do not know but watch this: Find the Maclaurin series for f(x) = (1-x)^(-1) and associated radius of convergence by Ms. Shaws Math Class

The mean of the data-set in this problem is given as follows:

19.56 pounds.

The mean of a data-set is given by the sum of all observations in the data-set divided by the number of observations, which is also called the cardinality of the data-set.

The dot plot shows the number of times that each observation appears, hence the observations are given as follows:

Hence the mean is given as follows:

Mean = (2 x 12 + 4 x 15 + 1 x 16 + 1 x 18 + 2 x 20 + 1 x 22 + 3 x 25 + 2 x 29)/(2 + 4 + 1 + 1 + 2 + 1 + 3 + 2)

Mean = 313/16

Mean = 19.56 pounds.

More can be learned about the mean of a data-set at https://brainly.com/question/1136789

#SPJ1

This is because as the level of confidence decreases, the corresponding z-score becomes smaller, which in turn results in a smaller margin of error.

(a) To find a 90% confidence interval for the proportion p, we can use the formula:

CI = p ± z*(sqrt(p*(1-p)/n))

where p is the sample proportion, n is the sample size, and z is the z-score corresponding to the desired level of confidence (in this case, 90%).

We are given that p = 330/550 = 0.6 and n = 550. Using a standard normal distribution table, the z-score for a 90% confidence interval is approximately 1.645.

Substituting these values into the formula, we get:

CI = 0.6 ± 1.645*(sqrt(0.6*(1-0.6)/550))

= 0.6 ± 0.042

= (0.558, 0.642)

Therefore, a 90% confidence interval for the proportion of voters who indicated their preference for the candidate is 0.558 to 0.642.

(b) The margin of error for this 90% confidence interval is given by:

ME = z*(sqrt(p*(1-p)/n))

where z is the z-score corresponding to the desired level of confidence and p and n are as before.

Substituting the values we obtained earlier, we get:

ME = 1.645*(sqrt(0.6*(1-0.6)/550))

= 0.042

Therefore, the margin of error for this 90% confidence interval is 0.042.

(c) Without doing any calculations, we can see that the margin of error for an 80% confidence interval will be smaller than that for a 90% confidence interval. This is because as the level of confidence decreases, the corresponding z-score becomes smaller, which in turn results in a smaller margin of error.

To learn more about  visit:

https://brainly.com/question/1597341

#SPJ11

The theoretical probability of the spinner not landing on blue is 3/4

From the question, we have the following parameters that can be used in our computation:

Colors = 4 i.e. purple, yellow, blue and red

Blue = 1

Not blue = 3

So, we have

Theoretical probability = Not Blue /Colors

Substitute the known values in the above equation, so, we have the following representation

Theoretical probability = 3/4

Hence, theoretical probability is 3/4

Read more about probability at

brainly.com/question/251701

#SPJ1

The units/one's digit of 5^221 is 5.

To determine the units/one unit digit of a number raised to a power, we only need to consider the units/one's digit of the base. In this case, the unit digit of 5 is 5.

Now, we need to look for a pattern in the units digit of 5 raised to different powers.

5^1 = 5 (units digit is 5)
5^2 = 25 (units digit is 5)
5^3 = 125 (units digit is 5)
5^4 = 625 (units digit is 5)
5^5 = 3125 (units digit is 5)
. . .and so on.

We can see that the unit digit of 5 raised to any power is always 5. Therefore, the units/one's digit of 5^221 is 5, not 3.

So, the statement "the units/one's digit of 5^221 is 3" is disproved.

Learn more about units:

https://brainly.com/question/141163

#SPJ11

The correct statement is c. When marginal utility is positive, an increase in the quantity consumed will increase total utility.

This is because as long as the marginal utility of each additional unit consumed is positive, the total utility will continue to increase with each additional unit consumed. However, when marginal utility starts to decrease, consuming additional units will result in diminishing returns and eventually lead to a decrease in total utility. The statement in option a is incorrect because an increase in the quantity consumed can still increase total utility if the marginal utility is positive. The statement in option b is also incorrect because if the marginal utility is positive, consuming more will increase total utility, not decrease it. Option d is also incorrect because when marginal utility is increasing, it means that the additional units consumed are providing more utility than the previous ones, so decreasing the quantity consumed will result in a decrease in total utility.

Know more about marginal utility here:

https://brainly.com/question/30841513

#SPJ11

To prove that the three points of intersection of the three circles with PA, PB, and PC as diameters are collinear, we'll use the following terms: circle, chord, diameter, intersection, and collinear.

Let X, Y, and Z be the points of intersection of circles with diameters PA, PB, and PC respectively. To prove that X, Y, and Z are collinear, we need to show that they lie on a straight line.

Consider triangles PAX, PBY, and PCZ. Since the diameters PA, PB, and PC are subtended by angles AXB, BYC, and CZA at the circumference of circle O, we have:

∠AXB = ∠BYC = ∠CZA = 90° (by the property of angles in a semicircle)

Now, let's consider the sum of the angles in quadrilateral ABYC:

∠AXC + ∠AXB + ∠BZC + ∠BYC = 360°

Since ∠AXB = ∠BYC = ∠CZA = 90°, we get:

∠AXC + 90° + ∠BZC + 90° = 360°

Simplifying, we have:

∠AXC + ∠BZC = 180°

This means that points X, Y, and Z are collinear, as the sum of angles ∠AXC and ∠BZC in a straight line is 180°. Therefore, we have proven that the three points of intersection of the three circles with PA, PB, and PC as diameters are collinear.

Learn more about points of intersection: https://brainly.com/question/11337174

#SPJ11

The variance and standard deviation can never be negative. However, they can be zero if there is no variability in the data. It is possible for the variance and standard deviation to be smaller or larger than the mean depending on the spread of the data.

The variance and standard deviation can never be negative.
1. Variance is a measure of how spread out the data points are from the mean. It is calculated by finding the average of the squared differences from the mean. Since squares are always positive or zero, the variance cannot be negative.

2. Standard deviation is the square root of the variance. Since the square root of a negative number is not a real number, the standard deviation cannot be negative either.

It is worth noting that both variance and standard deviation can be zero if all data points are the same, and they can be smaller or larger than the mean, depending on the data distribution.

Learn more about Variance:

brainly.com/question/13708253

#SPJ11

When measuring time, a part of a whole is not a whole when using units smaller than the whole unit of time.

For example, if we measure time in hours, then a part of an hour, such as 30 minutes, is not a whole. Similarly, if we measure time in minutes, then a part of a minute, such as 30 seconds, is not a whole.

In such cases, we need to convert the part into a fraction or decimal of the whole unit of time. For instance, 30 minutes is half of an hour, and 30 seconds is half of a minute.

It is important to keep track of the units of time being used and make appropriate conversions when necessary to ensure accurate and meaningful measurements.

To know more about time here

https://brainly.com/question/26862717

#SPJ4

Answer:

130.63

Step-by-step explanation:

The formula for a circle is:

Area = πr²

Let's plug in our values.

Area = 3.14(6.45)²

= 3.14(41.6025)

= 130.63185

Now we round to the nearest hundredth to get 130.63.

Hope this helps and good luck on your homework!

Answer:

130.62

Step-by-step explanation:

The formula for the area of a circle is [tex]\pi r^{2}[/tex].

We use 3.14 for pi and 6.45 for r:

3.14 · 6.45²

3.14 · 41.6

130.624, rounded to the nearest hundredth 130.62

1. The modal number of pairs of shoes owned by the children will be; 3.

2. The median number of pairs of shoes owned by the children  will be;3.

3. The Mean is 3.

1. The modal number of pairs of shoes owned by the children would be 3.

2. The median number of pairs of shoes owned by the children are;

= 14/2 th term

= 7 th term

= 3

3. The Mean would be

= (1 x 2+ 2 x 3+ 3 x 5+ 4 x 2 + 5 x 1+ 6x 1)/ (2 +3 +5 +2 + 1 +1)

= 42/14

= 3

Learn more about Arithmetic Mean here:

brainly.com/question/13000783

#SPJ1