Answer:
Examples 1, 3 and 4
Explanation:
An unexcited atom is an atom in the ground state i.e the atom has it's valence electrons in it's lowest energy level possible. This actually implies the normal electronic configuration of the atom. Thus, examples 1, 3 and 4 have the actual electronic configuration with there valence electrons in the lowest possible energy level.
Example 1: 1S² 2S² 2P⁴
Example 3: 1S² 2S² 2P⁶ 3S¹ (There seem to be a mistake in the question provided, P energy level can only 6 electrons not 8)
Example 4: 1S² 2S² 2P⁶ 3S¹
NOTE: If you take a look at example 2, it will be deduced that the 3P energy level has only 3 valence electrons and the last valence electron jumped to 3d energy level; making that atom appear to be in it's excited state.
How many moles of acetaminophen are in a 0.8mL (0.0008L) dose of infants Tylenol
Answer:
0.007 mol
Explanation:
Step 1: Given data
Volume of acetaminophen: 0.8 mL
Step 2: Calculate the mass corresponding to 0.8 mL of acetaminophen
The density of acetaminophen is 1.26 g/mL.
0.8 mL × (1.26 g/mL) = 1 g
Step 3: Calculate the number of moles corresponding to 1 g of acetaminophen
The molar mass of acetaminophen is 151.16 g/mol.
1 g × (1 mol/151.16 g) = 0.007 mol
Which of the following are subatomic particles that orbit the outside of an atom?
A.
molecules
B.
electrons
C.
neutrons
D.
protons
What is the energy of a wave with a wavelength of 2.25 nm?
The energy of a wave : 8.835.10⁻¹⁷ J
Further explanationThe energy in one photon can be formulated as
E = h. fWhere
h = Planck's constant (6.626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
f = c / λ
c = speed of light
= 3,10⁸ m/s
λ = wavelength
λ = wavelength of a wave = 2.25 nm = 2.25 x 10⁻⁹m
[tex]\tt E=h.\dfrac{c}{\lambda}\\\\E=6.626.10^{-34}\times \dfrac{3.10^8}{2.25.10^{-9}}\\\\E=8.835\times 10^{-17}~J[/tex]
In each case, state whether the forces are balanced or unbalanced. If unbalanced, calculate the net force and describe the direction of the resultant force.
Answer:
Check explanation section.
Explanation:
In order to understand balanced force and unbalanced forces the first law of Newton should be considered as a basic knowledge.
For Balanced forces, there is equal equality in the direction of the forces. In balanced forces, there is no acceleration.
For unbalanced forces, there is acceleration that is go say there is going to be movement. Therefore, net force is equal to unbalanced forces.
(i) Suitcase dropped from a height.
Answer: since there is movement that is acceleration, then the force here is unbalanced force. The resultant force is downwards.towards the greater force direction.
(ii) A bicycle moving with constant velocity on a straight road.
Answer: As the bicycle moves at constant velocity on the straight road the force here is Balanced. Frictional forces balances the forces from the cyclist.
(iii) The rope does not move in a tug of war on applying force at both ends.
Answer: Balanced force.
Thomson's plum pudding model of the atom was replaced by Rutherford's model. What was the biggest change Rutherford's model brought to our understanding of the atom? Group of answer choices
Answer:
This question is incomplete
Explanation:
This question is incomplete because of the absence of options. However, Rutherford's model of an atom highlighted the following (which you can use to determine your answer from the missing options)
1) electrons move in fixed circular part (now referred to as electron shells) around a central positively charged nucleus
2) The size of the nucleus is very small relative to the size of the atom
A car is traveling with velocity of 40 m/s and has a mass of 1120 kg. The car has __________ energy.
A. Kinetic
B. Potential
Answer:
A.
Explanation:
The car has kinetic energy.
Which of the following is not an example of biased language?
a.
“You are too short to reach that.”
b.
“Are you deaf?”
c.
“Move along, grandpa!”
d.
“I think I’ve been gypped.”
Answer:
I think it is D.
Explanation:
Answer:
b
Explanation:
Which of the following elements would you expect to be ductile and
malleable?
Germanium (Ge)
Argon (Ar)
O O O O
Nitrogen (N)
O Zirconium (Zr)
Answer:
ductile - germanium
mellabe - zirconium
When you connect your evidence to your claim you are using your
1. brain
2.reasoning
3. test
Answer:
2. reasoning
Explanation:
PLS GIVE BRAINLIEST
What does a particular point on a line of a phase diagram represent ?
Answer:
the line represents the condition where pressure and heat have the same effects.
Answer: C) The melting point of a substance at a specific pressure.
How many moles are contained in 5.0 g of SO2:
Hey there!
Molar mass SO₂ = 64.066 g/mol
Therefore:
1 mole SO₂ -------------------- 64.066 g
(moles SO₂ ) ??---------------- 5.0 g
( moles SO₂) = 5.0 * 1 / 64.066
(moles SO₂) = 5.0 / 64.066
moles = 0.0780 moles of SO₂
Hope this helps!
Susana heats up a sample of red crystals. While the sample is being heated,a gas is released and a blue powder is left after heating. Is the sample of red crystals an element or compound?
Answer & Explanation:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Answer:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Explanation
Sample response form Edg
DESPERATE WILL GIVE BRAILIST AND THANKXS
Which statement is true about a rock layer deposited on top of another rock layer?
A- It is younger than the rock layer below.
B- It is older than the rock layer below.
C- It is the same age as the rock layer below.
D- It is no different than the rock layer below
Hello there!
Your answer is C.
Answer:
The right option is; A. It is younger than the rock layer below.
Explanation:
A rock layer deposited on top of another rock layer is younger than the rock layer below. This is based on the law of superposition which states that in any undeformed sequence of rocks that are laid down in layers, the youngest layer of rock will be on top of the sequence, while the oldest layer will be at the bottom of the sequence.
7. Which of the following is always true when a substance undergoes a
phase change? *
O A. The molecules keep moving at the same average speed.
B. The substance becomes a liquid as it heats up.
C. The melting point of the substance changes.
D. The substance is made up of the same type of molecules.
The following answered has been deleted due to multiple violations to our Terms of Service.
what is the difference between fermentation and alcohol
Answer:
Unlike lactic acid fermentation where-in the end product is lactic acid, the 'waste' material in an alcohol respiration is ethanol (an alcohol) and CO2 (carbon dioxide). Human beings have already perfected the use of this process for commercial purposes like in the production of beer, wine and bread
Explanation:
In alcoholic fermentation, pyruvate changes to alcohol and carbon dioxide. This type of fermentation is carried out by yeasts and some bacteria.
I will give brainliest to answer this question right.
Which substance plays a major role in the eutrophication process?
A. ozone
B. salt
C. iron
D.phosphorus
Answer:
The substance is phosphorus or D!
Hope this helps!
what is the half life of the element in the picture
HELP BRAINLIEST
Answer:
6 days
Explanation:
The following data were obtained from the question:
Original amount (N₀) = 100 mg
Amount remaining (N) = 6. 25 mg
Time (t) = 24 days
Half life (t½) =?
Next, we shall determine the decay constant. This can be obtained as follow:
Original amount (N₀) = 100 mg
Amount remaining (N) = 6. 25 mg
Time (t) = 24 days
Decay constant (K) =?
Log (N₀/N) = kt / 2.303
Log (100/6.25) = k × 24 / 2.303
Log 16 = k × 24 / 2.303
1.2041 = k × 24 / 2.303
Cross multiply
k × 24 = 1.2041 × 2.303
Divide both side by 24
K = (1.2041 × 2.303) / 24
K = 0.1155 /day
Finally, we shall determine the half-life of the isotope as follow:
Decay constant (K) = 0.1155 /day
Half life (t½) =?
t½ = 0.693 / K
t½ = 0.693 / 0.1155
t½ = 6 days
Therefore, the half-life of the isotope is 6 days
Based on the scientific sources you found, did you think one person’s points were more scientifically valid than the other’s
Answer:
Yes. The scientific sources disputed several of the fitness instructor’s points. For example, he mentioned that GMO foods cause food allergies, but two credible sources disputed this claim. The lab technician, however, supported her findings with verifiable scientific information.
Explanation: plato
Q3: Fingers and hands pulling, pushing, pressing, or lifting are all examples of applying a
Is it friction gravity motion or force
Answer:
force
Explanation:
because the force
PLEASE HELP WILL GIVE BRAINLY IF UR CORRECT
Answer:
eon,era,period,epoch,and age
Ajay bought bottle that was labelled as distilled water. He suspected it to be tap water. What test he could use without adding any chemical in it to find out for sure?
Answer:
Ajay should pass electric current through the water and connect a bulb to the circuit. If the bulb glows, it means that the water is tap water or else, it is distilled water.
Explanation:
This is because tap water contains little impurities like ions of some salts etc., which help in the conduction of electricity. But, distilled water is pure water and doesn't have any ions present in it. So, it doesn't conduct electricity.
Hope this helped
Ajay can test the distilled water by performing the electricity conduction test.
Distilled water has been the water that has an absence of ions and electrolytes. It has been a poor conductor of electricity.
The tap water has been constituted with minerals, electrolytes, and impurities, which results in the addition of conductivity to the water.
To test whether the water has been distilled or not, the circuit test can be performed The water has dipped wires connected with a battery and a bulb. the distilled water is a poor conductor did not allow the bulb to glow. However, with tap water bulb glow.
Thus, to test the water to be distilled or tap, the electricity conduction test has been performed.
For more information about distilled water, refer to the link:
https://brainly.com/question/2403536
PLS PLS SOMEONE HELP ME ANSWER THESE QUESTIONS PLEEEAAASSSE!!
(press on the picture so you can see the questions better!)
Answer:
1)conduction
2) convection
3) conduction
4) radiation
5) radiation
6) radiation
7) conduction
8) conduction
9) radiation
10) convection
Explanation:
not 100% sure
Adaptations can only arise if
there is _______ within a species.
Answer:
Diversity?
Explanation:
Think thats bio
1. Raw egg to boiled egg.
2. Batter to idli.
3. Wet clothes to dry clothes.
4. Woollen yarn to knitted
sweater.
5. Grain to its flour.
6. Cold water to hot water.
7. Straight string to a coiled string.
8. Bud to flower.
9. Milk to Cheese.
10. Cowdung to biogas.
II. Ice cream to melted ice-cream.
12. Stretched rubber band to
its normal size.
13. Souring of milk.
14. Ripening of a mango.
15. Dissolving sugar in water.
these are reversible or Irreversible, chemical or physical, Natural or manmade, periodic or non periodic,desirable or undesirable?
Answer:
This is man made and natural
When purchasing an electrical device, what are the 2 financial costs you need to consider?
Answer:
How much electricity is uses and any repairs
Explanation:
When purchasing an electrical device, the two financial costs you need to consider are the initial price of the device and the operating costs to make use of the device.
The financial cost is the cost of finance charged per item purchased, it may also include miscellaneous charges associated with the usage of the item.
Here, before you purchase the electrical device, think carefully if:
the initial price fits into your budget and;the consumption of the electricity bills(operating costs) the electrical device will consume.Learn more about financial costs here:
https://brainly.com/question/7269549?referrer=searchResults
How do isotopes affect the average atomic mass of an element?
Answer:
The versions of an element with different neutrons have different masses and are called isotopes. The average atomic mass for an element is calculated by summing the masses of the element's isotopes, each multiplied by its natural abundance on Earth.
Explanation:
Please hurry i really need it fast
The answers are here
In which figure does Colin do work?
A. Figure A
B. Figure B
C. Both figures
D. Neither figure
In this unbalanced chemical equation, which element is not conserved?
3LIOH + H3PO4 Li PO4 + 3H20
A. O
B. H
C. P
D. LI
Answer:
LI
Explanation:
There is three Li in the start but One Li after
I need help with my chemistry homework Here are the problems that I am struggling with. I need this to be answered by 11:59 tonight.
1. How many joules are required to melt 338. grams of ice?
2. How many joules are required to convert 418 grams of boiling water into steam?
3. How many joules are required to convert 150. grams of boiling water into steam?
4. How many joules are required to convert 42.0 grams of boiling water into steam?
5. How many joules are required to heat 422 grams of steam from 110.0 0C to 135.0 0C?
Answer:
1. 111.54 kJ
2. 944.68 kJ
3. 339 kJ
4. 94.92 kJ
5. 21.0578 kJ
Explanation:
1. The heat required to melt a given quantity of ice is known as the latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice
[tex]L^{\circ}_F[/tex], of ice = 330 J/g
The heat required to melt a given mass of ice = Mass of ice, m × latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice
The heat required to melt 338 grams of ice = 338 g × 330 J/g = 111,540 J = 111.54 kJ
2. The latent heat of vaporization, l, of water = 2260 J/g
The heat required to convert, m grams of water to steam at
The heat required to convert 418 grams of boiling water into steam = 418 g × 2260 J/g = 944680 J = 944.68 kJ
3. To convert 150 grams of boiling water to steam, we have;
Heat required = 150 g × 2260 J/g = 339,000 J = 339 kJ
4. To convert 42.0 grams of boiling water to steam, we have;
Heat required = 42.0 g × 2260 J/g = 94,920 J = 94.92 kJ
5. The specific heat capacity of steam is 1.996 J/(g·°C)
The heat, Q, required to raise a given mass, m, of steam by Δt °C is given as follows;
Q = m × c × Δt
The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C is therefore;
Q = 422 g × 1.996 J/(g·°C) × (135.0 °C - 110.0 °C) = 21057.8 J
The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C = 21057.8 J = 21.0578 kJ
why water can be consider as an acid as well as base .explain briefly