Answer:
reflection of the moon, or just reflection
Explanation:
when the sunlight hits the moon, it refects back to earth making the moon appear to glow
Answer:
reflecting
Explanation:
the sun's light reflects off the moon, making the moon visible
What will happen to a balloon filled with air when you cool the balloon in ice
Answer:
the volume of balloon decreases by the lower temperature because the gas inside is cool down13 A lawn-mower is pushed with a force of 50 N.
If the angle between the handle of the mower
and the ground is 30°,
(i) Calculate the magnitude of the force that
is pressing the lawn-mower directly into
the ground.
(ii) Calculate the magnitude of the effective
force that moves the mower forward.
(iii) Why does the lawn-mower move forward
and not downward into the ground?
Answer:
13. (i) The magnitude of the force that is pressing the lawn-mower directly into the ground is 25 N
(ii) The magnitude of the effective force that moves the mower forward is approximately 43.3 N
(iii) Because there are no net downward force acting on the lawn-mower
Explanation:
13. The given force pushing the lawn-mower = 50 N
The angle at which the force acts = 30° to the ground
The component of the pushing force are;
(i) The magnitude of the force that is pressing the lawn-mower directly into the ground = The vertical component of the pushing force
The vertical component of the pushing force, [tex]F_y[/tex] = 50 N × sin(30°) = 25 N
∴ The magnitude of the force that is pressing the lawn-mower directly into the ground = [tex]F_y[/tex] = 25 N
(ii) The magnitude of the effective force that moves the mower forward = The horizontal component of the pushing force
The horizontal component of the pushing force, Fₓ = 50 N × cos(30°) = 25·√3 N ≈ 43.3 N
∴ The magnitude of the effective force that moves the mower forward = 25·√3 N ≈ 43.3 N
(iii) The lawn mower moves forward and not downwards because according to Newton's first Law of motion, the lawn-mower moves forward because it is being acted on by a net forward directed horizontal force
However, according to Newton's third law, the reaction of the ground is equal to the weight of the lawn mower, therefore, there are no net vertical force acting on the lawn-mower, such that the lawn-mower remains in the initial horizontal level and does not move downward into the ground.
HELP MEEEEEEEEEEEEEEEEE
Answer:
I'm pretty sure it's half
Answer:
half
Explanation:
.................................
Which statement is true of an electromagnetic wave?
A. The wave needs particles in matter as a medium.
B. The wave travels through electric and magnetic fields.
C. The wave is caused by vibrating particles of matter.
D. The wave carries mechanical energy.
Answer:
C
Explanation:
Electromagnetic waves are produced by the vibration of charged particles.
The true statement of an electromagnetic wave is option c. The wave is caused by vibrating particles of matter.
What is an electromagnetic wave?It is the wave that should be developed that leads to the vibration that lies between the electric field and a magnetic field.
Here EM waves should be composed for oscillating magnetic and electric fields.
Hence, the option c is correct.
Learn more about wave here: https://brainly.com/question/19053849
This image shows layers underground.
Top to bottom: Soil, Clay, Rocks, Granite.
Which layer will become saturated first when rain falls?
clay
granite
rocks
soil
Answer:
soil
Explanation:
CORRECT
Answer:
soil
Explanation:
Hope this will help
A 15 n net force is used to move a 5kg box. What is the resulting acceleration?
A. 15m/s^2
B. 5m/s^2
C. 20m/s^2
D. 3m/s^2
Answer:3 m/s
Explanation:
The resulting acceleration to move the 5Kg box is equal to 3m/s². Therefore, option (D) s correct.
What is acceleration?Acceleration can be defined as the rate of change in the velocity of an object with respect to time. The acceleration of an object is a vector parameter with both magnitude and direction. Acceleration is also defined as the first derivative of the velocity w.r.t. time and the second derivative of position w.r.t. time and
According to Newton's 2nd law of motion, the force is equal to the product of the mass (m) and acceleration.
F = ma
And, a = F/m
Therefore, the acceleration (a) inversely proportional to the mass (m).
Given, the force used to move the box, F = 15 N
The mass of the given Box, m = 5 Kg
The resulting acceleration, a = 15/5 = 3 m/s²
Therefore, the acceleration of the box is equal to 3 m/s² when it is pushed with a force of 15 N.
Learn more about acceleration, here:
brainly.com/question/3046924
#SPJ5
Identify the medium an electromagnetic wave travels the fastest in.
empty space or vaccum the Electro magnetic wave travels the fastest.
What is the gravitational potential energy of a 250 kg rock on top of a 200 meter cliff?
Answer:
500000 approx........
...
May you please help me?
Answer:
The first one is 9 times the original
The second one is 1/2 times
The third one is 1/3 times
What are forces? (Check all that apply)
-Push or pull
-An action that has the ability to change potion
-Actions that can increase or decrease the speed of a moving object
-Actions that can change the direction in which an object is moving
-Gravity
-Electromagnetic
-Strong Nuclear Force
-Weak Force
-Matter
Answer:
Push or Pull
Gravity
Strong Nuclear Force
Weak Force
Explanation:
A person on a daily diet of 2,500 calories should get no_more than
calories from fat each day.
Answer:
35%
Explanation:
Answer:
its 83
Explanation:
A rock is thrown horizontally off a cliff with an initial velocity of 15 m/s. How high was the cliff if the rock lands 22 m from the base of the cliff?
Answer:
22 m
Explanation:
Answer:
cliff height = 10.55 m
Explanation:
Remarks
This is one of those questions that defies belief. The final vertical velocity is the same as if you just dropped the rock, which is amazing.Another amazing fact is that the horizontal speed has no acceleration. And amazing fact number three is the the vertical initial speed is 0.And finally, the time taken to go horizontally = time to go vertically.Solution
Time
So the time taken is d = r * t
Remember, this formula can only be used when there is no acceleration.
d = 22 meters
r = 15 m/s
t = ?
t = d / r
t = 22 / 15
t = 1.467
Height of the Cliff
vi = 0 (vertially)
a = 9.8 m/s^2
t = 1.467 seconds The time horizontally and vertically is the same.
d = ?
Formula
d = vi*t + 1/2 a t^2
Solution
d = 0 + 1/2 * 9.8 * 1.467^2
d = 10.55 meters.
The illustration shows the forces in Newtons (N) acting on three different blocks. Which
boxes will move under these conditions?
Answer:a
Explanation:because I know
Answer:
B & C
Explanation:
the first block will not move
A rock has 750 J of potential energy as it sits on a ledge. If the rock were pushed off the ledge, how much would it have just before it hit the ground?
Answer:
the 750 j will have potential energy is 375
Explanation:
750/2 is 375
what hapenes to the wavelength of a wave if the frequency of the wave is increased?
Answer: The number of complete wavelengths in a given unit of time is called frequency (f). As a wavelength increases in size, its frequency and energy (E) decrease. From these equations you may realize that as the frequency increases, the wavelength gets shorter. As the frequency decreases, the wavelength gets longer.
Explanation:
What happens to waves near the shore?
Answer As a wave travels across the open ocean, it gains speed. When a wave reaches a shallow coastline, the wave begins to slow down due to the friction caused by the approaching shallow bottom. ... Think of it like driving a car at high speed and then slamming on the breaks. Everything is going to fly to the front.:Waves at the Shoreline: As a wave approaches the shore it slows down from drag on the bottom when water depth is less than half the wavelength (L/2). The waves get closer together and taller. ... Eventually the bottom of the wave slows drastically and the wave topples over as a breaker. hope this helps have a nice night❤️❤️❤️
Explanation:
Calculate the pressure exerted by the two straps of a handbag that has a force of 15N, and covers an area of 0.5cm2 (each)
Answer:
Pressure = 3000N/m²
Explanation:
Given the following data;
Force = 15N
Area = 0.5cm² to meters = 0.5/100 = 0.005m²
To find the pressure;
Pressure = Force/area
Substituting into the equation, we have:
Pressure = 15/0.005
Pressure = 3000N/m²
A fault is formed by the movement of a ___ plate boundary
A.convergent
B.traditional
C.divergent
D.transform
How efficient is a pulley system if it enables you to lift a 700.0 Newton engine (Fr) 0.550 meters (dr) if you exerted 35.7 Newtons (Fe) of force while pulling 11.43 meters (de) of rope?
Answer:
96.3%
Explanation:
Efficiency = Work input/Work output * 100%
Work done = Force * distance\
Work done by the engine is the work output = 700 * 0.55
Work output = 423.5Nm
Work done by you is the work input = 35.7*11.43
Work input = 408.051Nm
Efficiency = 408.051/423.5 * 100
Efficiency = 0.963 * 100
Efficiency = 96.3%
Hence the efficiency of the pulley system is 96.3%
A hydrogen atom has a radius of 2.5 x 10-11 m
Determine the radius of a magnesium atom.
Answer:
[tex]R = 1.5* 10^{-10}m[/tex]
Explanation:
Given
[tex]r = 2.5 * 10^{-11}m[/tex] -- radius of hydrogen atom
See attachment
Required
Determine the radius of magnesium atom (R)
From the attachment, the ratio of a hydrogen atom to a magnesium atom is:
[tex]Ratio = 6mm : 36mm[/tex]
Simplify
[tex]Ratio =1 : 6[/tex]
Represent the radius as ratio:
[tex]Ratio = r : R[/tex]
Substitute [tex]r = 2.5 * 10^{-11}m[/tex]
[tex]Ratio = 2.5 * 10^{-11}m : R[/tex]
Equate both ratios
[tex]2.5 * 10^{-11}m : R = 1 : 6[/tex]
Express as fraction
[tex]\frac{2.5 * 10^{-11}m}{R} = \frac{1}{6}[/tex]
Cross Multiply
[tex]R * 1 = 2.5 * 10^{-11}m * 6[/tex]
[tex]R * 1 = 2.5 * 6* 10^{-11}m[/tex]
[tex]R * 1 = 15* 10^{-11}m[/tex]
[tex]R = 15* 10^{-11}m[/tex]
[tex]R = 1.5*10* 10^{-11}m[/tex]
[tex]R = 1.5* 10^{1-11}m[/tex]
[tex]R = 1.5* 10^{-10}m[/tex]
Hence, the radius of the magnesium atom is: [tex]1.5* 10^{-10}m[/tex]
Two resistors, A and B, are connected in series to a 6.0 V battery. A voltmeter connected across resistor A measures a potential difference of 4.0 V. When the two resistors are connected in parallel across the 6.0 V battery, the current in B is found to be 2.0 A. Find the resistances of A and B.
Answer:
Resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω
Explanation:
When the two resistors are in series, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B.
Given that V₁ + V₂ = 6.0 V and V₁ = 4.0 V,
V₂ = 6.0 V - V₁ = 6.0 V - 4.0 V = 2.0 V
Also, let the current in series be I.
So, V₁ = IR₁ and V₂ = IR₂
I = V₁/R₁ and I = V₂/R₂
equating both expressions, we have
V₁/R₁ = V₂/R₂
4.0 V/R₁ = 2.0 V/R₂
dividing through by 2.0 V, we have
2/R₁ = 1/R₂
taking the reciprocal, we have
R₂ = R₁/2
R₁ = 2R₂
From the parallel connection, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B. Since it is parallel, V₁ = V₂ = V = 6.0 V
Also, V₂ = I₂R₂ where I₂ = current in resistor B = 2.0 A and R₂ = resistance of resistor B
So, R₂ = V₂/I₂
= 6.0 V/2.0 A
= 3.0 Ω
R₁ = 2R₂
= 2(3.0 Ω)
= 6.0 Ω
So, resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω
The resistance of A is 6Ω while for B is 3Ω.
Definition of potential differencePotential difference is the amount of work done in moving a unit charge from one point to another.
When the two resistors are connected in parallel across the 6.0 V battery, the current in B is found to be 2.0 A, hence:
2 * Rb = 6 V
Rb = 3Ω
For the series connection:
I * 3 = (6 - 4)
I = 2/3 A
Hence:
(2/3) * Ra = 4
Ra = 6Ω
The resistance of A is 6Ω while for B is 3Ω.
Find out more on potential difference at: https://brainly.com/question/14306881
how do you increase the ideal mechanical advantage of an inclined plane?
Answer:
The mechanical advantage increases as the slope of the incline decreases. But the load will then have to be moved a greater distance. The ideal mechanical advantage (IMA) of an inclined plane is the length of the incline divided by the vertical rise, the so-called run-to-rise ratio.
Explanation:
PLEASE MARK ME AS BRAINLIEST
Which statement describes the difference between ionic bonds and Van der
Waals forces?
A. Ionic bonds involve the sharing of electrons between atoms, while
Van der Waals forces involve the attraction of nonpolar molecules.
B. Ionic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the sharing of electrons between
atoms.
C. lonic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the attraction of nonpolar molecules.
D. Ionic bonds involve the attraction of nonpolar molecules, while
Van der Waals forces involve the transfer of electrons between
ions.
Answer:
C. lonic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the attraction of nonpolar molecules.
Explanation:
Just did it
What is the impulse of a constant force of 50 newtons applied for 0.6 seconds
Answer:
30 kg·[tex]\frac{m}{s}[/tex]
Explanation:
Impulse is equal to the average force multiplied by the elapsed time, or
J=[tex]F_{av}[/tex]Δt
Your average force [tex]F_{av}[/tex] is 50 newtons because it was a constant force. Your elapsed time Δt was 0.6 seconds.
Multiply these values and you get an impulse of 30 kg·[tex]\frac{m}{s}[/tex]
Car A has twice the mass of Car B; both travel at the same speed. Compared to Car B. Car A has:
o the same the energy
o four times the energy
Otwice the energy
one-half the energy
one-fourth the energy
Answer:
Car A has twice the energy of car B.
Explanation:
The kinetic energy of an object is given by :
[tex]K=\dfrac{1}{2}mv^2[/tex]
Where
m is the mass
v is the speed of the object
Car A has twice the mass of Car B. Both travel at the same speed i.e.
[tex]m_A=2m_B[/tex]
So,
[tex]\dfrac{K_A}{K_B}=\dfrac{(1/2)m_Av^2}{(1/2)m_Bv^2}\\\\=\dfrac{2m_B}{m_B}\\\\\dfrac{K_A}{K_B}=2\\\\K_A=2\times K_B[/tex]
So, the kinetic energy of car A is twice of the kinetic energy of car B.
Answer:
Car A has twice the energy
Explanation:
calculate the ground pressure of a 90kg gas cylinder the diameter of the cylinder is 1.1 m
Answer:
P = 928.09 Pa
Explanation:
Given that,
Mass of a gas cylinder, m = 90 kg
The diameter of the cylinder, d = 1.1 m
Radius, r = 0.55 m
We need to find the ground pressure. The pressure is equal to force per unit area. So,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]
So, the ground pressure is 928.09 Pa.
Big sound is heard in bathroom than in a living room
Answer
That doesn't make any sense.
Explanation:
6. The transfer of thermal energy by radiation does not require matter.
O True
O False
Answer:false
Explanation:
what is hydraulic pressure
The total thrust, expressed in pounds or tons, that the hydraulic-feed mechanism on a drill can impose on a drill string; also, the pressure of the fluid within the hydraulic cylinders, generally expressed in pounds per square inch. Ref: Long.
Hydraulic pressure is the force imparted per unit area of a liquid on the surfaces which it has contact. Liquids are incompressible, and as such, when a load acts
How much energy is transferred electrically by a 2000 W cooker in half an hour?
Responder:
E = 1440 kJ
Explicación:
Se da que,
La potencia de un horno de cocción es de 800 W
El voltaje al que se opera es de 230 V
Tiempo, t = 30 minutos = 1800 segundos
Necesitamos encontrar la energía eléctrica utilizada por el horno de cocción. El producto de la potencia y el tiempo es igual a la energía consumida. Entonces,