Car B is rounding the curve with a constant speed of 54 km/h, and car A is approaching car B in the intersection with a constant speed of 72 km/h. The x-y axes are attached to car B. The distance separating the two cars at the instant depicted is 40 m. Determine:

Answer:

the potential energy decreases as it is converted to kinetic energy.

Explanation:

As things move, their potential energy converts to kinetic energy to power them along. When a ball rolls down the top of a ramp, all the potential energy it accumulated at the top of the ramp converts to kinetic energy to help it roll down. In other words, its potential energy decreases as its kinetic energy increases.

Answer: I think $20 billion a year it’s worth the cost. The reasoning behind that is because we can conduct research on various things that could help out humanity. Therefore we can conclude that’s spending billions of dollars every year is worth it.

Explanation:

I go to k12 too and i am writing this test now too. I am like pretty sure my answer is correct. I guess we can kinda help eachother with this assignment cuz i am sorta stuck too.

I dont know i hope this helped a bit I know its not much i need help with this too.

Answer:

Explanation:

From the information given;

mass of the crate m = 41 kg

constant horizontal force = 135 N

where;

[tex]s_1 = 15.0 \ m \\ \\ s_2 = 12.0 \ m[/tex]

coefficient of kinetic friction [tex]u_k[/tex] = 0.28

a)

To start with the work done by the applied force [tex](W_f)[/tex]

[tex]W_F = F\times (s_1 +s_2) \times cos(0) \ J[/tex]

[tex]W_F = 135 \times (12 +15) \times cos(0) \ J \\ \\ W_F = (135 \times 37 )J \\ \\ W_F =4995 \ J[/tex]

Work done by friction:

[tex]W_{ff} = -\mu\_k\times m \times g \times s_2 \\ \\ W_{ff} = -0.320 \times 41 \times 9.81 \times 12 \ J \\ \\ W_{ff} = -1544.49 \ J[/tex]

Work done  by gravity:

[tex]W_g = mg \times (s_1+s_2) \times cos (90)} \ J \\ \\ W_g = 0 \ j[/tex]

Work done by normal force;

[tex]W_n = N \times (s_1 + s_2) \times cos (90) \ J[/tex]

[tex]W_n = 0 \ J[/tex]

b)

total work by all forces:

[tex]W = F \times (s_1 + s_2) + \mu_k \times m \times g \times s_2 \times 180 \\ \\ W = 135 \times (15+12) \ J - 0.320 \times 41 \times 9.81 \times 12[/tex]

W = 2100.5  J

c) By applying the work-energy theorem;

total work done = ΔK.E

[tex]W = \dfrac{1}{2}\times m \times (v^2 - u^2)[/tex]

[tex]2100.5 = 0.5 \times 41 \times v^2[/tex]

[tex]v^2 = \dfrac{2100.5}{ 0.5 \times 41 }[/tex]

[tex]v^2 = 102.46 \\ \\ v = \sqrt{102.46} \\ \\ \mathbf{v = 10.1 \ m/s}[/tex]

Answer:

I think Yes because they could have different amounts of energy.

Explanation:

Answer:

. It is an extraordinarily rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.

Explanation:

Answer:

1) 204.6663938

2) 19.51219512

3) 368

4) 135.81

5) 43932240

6) 63830.2

7) 2470.8

8) 1.718213058

9) 1005550.526

10) 586.365

Most of the questions you asked were in repeating decimal form.

Explanation:

Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.

Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.

Answer: Both False

Explanation:

Our Milky Way Galaxy is a spiral galaxy. Some spiral galaxies are what we call "barred spirals" because the central bulge looks elongated

Irregualuar glaxyices are all over  the place

Answer:

Is that your answer

Answer:

F = 2074.13 lb

Explanation:

Given that,

Mass of car, m = 2800 lb = 1270.059 kg

Initial speed, u = 5 mi/h = 2.2352 m/s

Final speed, v = - 1.5 mi/h = -0.67056 m/s  (in opposite direction)

Time, t = 0.4 s

We need to find the magnitude of the average horizontal force (lb) exerted on the car during the impact. It can be calculated as :

[tex]F=m\times \dfrac{v-u}{t}\\\\F=1270.059\times \dfrac{-0.67056 -2.2352 }{0.4}\\\\F=9226.21\ N[/tex]

or

F = -2074.13 lb

So, the required force is 2074.13 lb.

Answer:

Explanation:

Neutrinos are otherwise called leptons. They are principal particles. A lepton is a rudimentary half-spin molecule that doesn't go through solid reactions. Neutrinos are not usually charged and exceptionally light weighted so they once in a while interface with other matter. Neutrinos are light weighted. Their mass is around 10⁻⁷ kg. A neutrino possesses a small radius, too little to ever be estimated. A little span and very less mass make them imperceptible. Since neutrinos have next to no mass. they travel at almost the speed of light and thus they arrive at the outside of the Sun in only 2 seconds, dissimilar to photons which take convoluted ways to arrive at the Sun's surface in a huge number of years.  

The photon and neutrino, both were made in the Sun's center yet on various occasions. The neutrino is only a couple of minutes old though the photon is around 1,000,000 years of age. At the point when the photon was made in the Sun's center. it needed to venture out to the outside of the Sun. in any case, rather because of its hefty mass and cooperation with other matter, it headed out a crisscross way to the surface. Ordinarily, it was repulsed and it was sent back to the middle where it needed to begin once more. It required a large number of years for a photon to arrive at the outside of the Sun.

Nonetheless, when it arrived at the Sun's surface, it required just 8.8 minutes for the photon to arrive at Earth. The neutrino was anyway made only a couple of minutes prior in the Sun's center. Since it has an entirely irrelevant mass, little size, and no charge, it didn't interface with its environmental factors. So it just required 2 seconds for the neutrino to arrive at the Sun's surface. When it arrived at the Sun's surface, it arrived at the earth in about 8.8 minutes. with the photon. So both, photon and neutrino have various histories as the two of them were made at a hole of around 1,000,000 years.

Answer:

[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]

[tex]44.43^{\circ}[/tex], second order does not exist

Explanation:

n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]

[tex]\lambda[/tex] = Wavelength

m = Order

Distance between slits is given by

[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]

[tex]\lambda=400\ \text{nm}[/tex]

m = 1

We have the relation

[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]

The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].

[tex]\lambda=700\ \text{nm}[/tex]

m = 1

[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]

Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.

The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].

Second order angle does not exist.

Answer:

32.25 s

Explanation:

From the question,

P = W/t.............. Equation 1

Where P = Power, W = work done, t = time.

But

W = F×d................. Equation 2

Where F = force and d = distance

Substitute equation 2 into equation 1

P = F×d/t............... Equation 3

make t the subject of euqation 3

t = (F×d)/P............. Equation 4

Givn: F = 150 N, d = 4.3 m, P = 20 watts.

Substitute these values into equation 4

t = (150×4.3)/20

t = 32.25 s

Answer:

Molecular scale. The story begins a long time ago  

when the idea that molecules are in constant motion  

was first discovered. Part of the evidence that you can  

see in everyday life was discovered by Robert Brown  

about 150 years ago when he used a microscope to  

watch how tiny dust particles move.

So how fast do molecules move? It all depends upon  

the molecule and its state: molecules in a solid state  

move slower than in a liquid state, and much slower  

than gas molecules. One estimate puts gas molecules  

in the range of 1,100 mph at room temperature. Cool  

them down to almost absolute zero and they slow  

down to less than 0.1 mph (slower than the average  

couch potato). The fact that they are always moving  

makes it a challenge to see molecules and make stuff  

out of them, but it’s a challenge that scientists  

work hard to figure out.

Explanation:

Answer:

The answer should be D

Explanation:

Answer:

According to "http://ww2010.atmos.uiuc.edu"  Diffraction is the slight bending of light as it passes around the edge of an object.

Some examples of Light Defraction would be..

-CD reflecting rainbow colours

-Sun appears red during sunset

-From the shadow of an object

Answer:

Steel

Explanation:

Steel is a metal that magnets stick to because iron can be found inside steel

Answer:Magnets stick to any metal that contains iron, cobalt or nickel.

Explanation:Iron is found in steel, so steel attracts a magnet and sticks to it. Stainless steel, however, does not attract a magnet.

Answer:

From an average distance of 886 million miles (1.4 billion kilometers), Saturn is 9.5 astronomical units away from the Sun. One astronomical unit (abbreviated as AU), is the distance from the Sun to Earth. From this distance, it takes sunlight 80 minutes to travel from the Sun to Saturn.

we have that from the Question"The average mean distance of Saturn from the sun is" it can be said that  Tthe average mean distance of Saturn from the sun is

From the Question we are told

The average mean distance of Saturn from the sun is

Generally

The Sun is the star of the milky way galaxy and its distance from every planet in the milky way determines in one way or another its properties and in-habitability

Saturn being a Planet of the milky way we see that Saturn is a significant distance away from sun

A distance of 1427 x 10^6 km or 886 696 691 miles

Therefore

The average mean distance of Saturn from the sun is

A distance of 1427 x 10^6 km or 886 696 691 miles

For more information on this visit

https://brainly.com/question/19007362?referrer=searchResults

Answer:

[tex]\huge\boxed{T = 0.025\ seconds}[/tex]

Explanation:

Given:

Frequency = f = 40 Hz

Required:

Time period = T = ?

Formula:

[tex]\sf T = 1 / f[/tex]

Solution:

T = 1 / 40

T = 0.025 seconds

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

The specific heat capacity of steel is lower than the specific heat capacity of wood

Explanation:

THERE IS ONLY 1 ON MY assignment i geot dis right  please brainlyist

The specific heat capacity of steel is lower than the specific heat of a piece of wood. Therefore, option (2) is correct.

Specific heat can be defined as the heat energy required to change the temperature of one unit mass of a substance of a constant volume by 1 °C. The S.I. unit of the specific heat capacity of a material is KJ/Kg.

The thermal capacity of a material is defined as a physical property of a substance. The amount of heat is given to a given mass to create a change in unit temperature.

The mathematical expression of specific heat capacity can be written as :

Q = m C ΔT      Where C is the heat capacity.

The specific heat capacity is an intensive property of a substance as it does not depend upon the size of the material.

A steel metal fence post feels colder than a wooden fence post of similar size because the specific heat of steel is lower than the specific heat capacity of wood.

Learn more about specific heat, here:

brainly.com/question/11297584

#SPJ5

Answer:

5.0/s

Explanation:

Answer:

b and a it is this that abewsr

Answer:

The angular speed is 23.24 rad/s.

Explanation:

Given;

mass of the disk, m = 7 kg

radius of the disk, r = 0.2 m

applied force, F = 42 N

distance moved by disk, d = 0.9 m

The torque experienced by the disk is calculated as follows;

τ = F x d = I x α

where;

I is the moment of inertia of the disk = ¹/₂mr²

α is the angular acceleration

F x r = ¹/₂mr² x α

The angular acceleration is calculated as;

[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]

The angular speed is determined by applying the following kinematic equation;

[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]

initial angular speed, ωi = 0

angular distance, θ = d/r = 0.9/0.2 = 4.5 rad

[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]

Therefore, the angular speed is 23.24 rad/s.

Answer:

B. in the direction of the force

Explanation:

Sana nakatulong

Answer:

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

Explanation:

We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.

Formula for resistance is;

R = V/I

R = 12.6/2.07

R = 6.087 ohms

Since R1 and R2 are connected in series.

Thus; R1 + R2 = 6.087 ohms

R1 = 6.087 - R2

We are also told that when they are connected in parallel, the current is 8.98 A.

Thus, R = 12/8.98

R = 1.403 ohms

Thus;

(1/R1) + (1/R2) = 1/1.403

Let's put 6.087 - R2 for R1;

(1/(6.087 - R2)) + (1/R2) = 1/1.403

Multiply through by 1.403R2(6.087 - R2) to get;

1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)

Expanding gives;

1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²

(R2)² - 6.087R2 + 8.54 = 0

Using quadratic formula, we have;

R2 = 2.193 ohms or 3.894 ohms

Thus,

R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894

R1 = 3.894 or 2.193

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

Answer:

Both.

Explanation:

Given that a block and a ball have the same mass and move with the same initial velocity across a floor and then encounter identical ramps. The block slides without friction and the ball rolls without slipping. 1)Which one makes it furthest up the ramp ?

Since both of them have the same mass and the same initial velocity, then, they will both have the same kinetic energy.

That is,

K.E = 1/2mv^2

Friction is a force that opposes motion. And since the frictional force is zero,

Both of them will accelerate from Newton's law.

F = ma

We can therefore conclude that both of them will make it further up the ramp.

I uploaded the answer to a file hosting. Here's link:

tinyurl.com/wpazsebu