calculate the molecular weight (in amu) of monosodium glutamate.

The concentration of molecule and temperature has a positive correlation with the chemical reaction. The higher the concentration and temperature, the faster the reaction rate will be. The average kinetic can be calculated by using this formula KE = [tex]\frac{1}{2}mv^{2}[/tex].

There are some factors that affect the motion of the molecules:

If the concentration is increased, more particles move together. There will be more collisions and the chemical reaction rate is increased.

The rate of a chemical reaction can be changed caused by the temperature. If the temperature is increased, it will raise the average kinetic energy of the molecule and cause it moves more quickly.

The amount of kinetic energy can be calculated with the equation:

KE = [tex]\frac{1}{2}mv^{2}[/tex] . The kinetic energy of a moving object depends on its mass and velocity. The faster a molecule moves, the more kinetic energy it has.

Thus, increasing the concentration and temperature will increase the rate of reaction. The average kinetic energy can be calculated by using this formula KE = [tex]\frac{1}{2}mv^{2}[/tex]

Learn more about factors that affect the reaction rate by clicking this link :

https://brainly.com/question/14817541

#SPJ4

The different antacids used will be the independent variable.

Antacids are medications that alleviate heartburn and indigestion by decreasing the amount of acid in stomach. They are bases that are used to neutralize acidity (caused by acids) - which occurs when your stomach releases too much of HCl acid in the stomach. They do this neutralization of stomach acid by inhibiting an enzyme that produces acid in order to break down food for digestion (pepsin). High level of acid production in stomach can lead to acidity which may result in production of gases (resulting in bloating and discomfort) and gastric ulcers. Regarding how phenol red acts as a pH indicator, over the pH range of 6.6 to 8.0, its color gradually transitions from yellow to red. When the pH rises above 8.1, phenol red turns a bright pink (fuchsia) color. This color change is caused by phenol red losing protons (and changing color) as the pH rises. But addition of HCl would start imparting the nature of acids to the solution, so the color change would go from red to yellow.

To know more about acids :

https://brainly.com/question/25148363

#SPJ4

f the length of one side of a square is 12.0 m, the perimeter of the square is 48.0 m

To calculate the perimeter of a square, you need to add up all four sides of the square. The formula for the perimeter of a square is P = 4s where s is the length of one side of the square.

Given that one side of the square is 12.0 m, we can plug this value into the formula to find the perimeter.

P = 4s = 4(12.0 m) = 48.0 m

So, the perimeter of the square is 48.0 m

Perimeter is the measure of the distance around the outside of a two-dimensional shape, such as a square, rectangle, triangle, or circle. It is the sum of the lengths of all the sides of the shape. It is used to measure the size or the extent of a shape and is usually measured in units such as meters, centimeters, inches, or feet.

Learn more about square here:

https://brainly.com/question/28776767

#SPJ4

The amount that will be left after 115.2 years, given that you started with 10 grams sample of strontium-90 is 0.625 g

To obtain the amount that will be left after 115.2 years, we shall begin our calculation by obtaining the number of half lives that has passed.

The number of half lives that has passed can be obtained as followed:

n = t / t½

n = 115.2 / 28.8

n = 4

Thus, 4 half lives has passed.

Finally, we shall determine the amount that will be left after 115.2 years. This is illustrated below:

N = N₀ / 2ⁿ

N = 10 / 2⁴

N = 10 / 16

N = 0.625 g

Thus, we can conclude that the amount that will be left after 115.2 years is 0.625 g

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

The volatile is defined as the speed or rate at which a substance evaporates when exposed to the air.

The Volatility is indicated by the  substance's vapor pressure. It is the tendency of the substance to the speed at which it vaporizes or evaporates. The Substances with the higher vapor pressure will be vaporize more easily at the given temperature than compared to the substances with the lower the vapor pressure.

Thus, the speed or rate at which a substance evaporates when exposed to the air is termed as the volatility. It is tendency of the substances to get vaporize.

To learn more about volatility here

https://brainly.com/question/4373812

#SPJ4

To find the volume of a 1255 mg sample of a substance with a density of 19.3 g/cm3, we need to divide the mass by the density.

The formula for calculating the volume of a substance from its mass and density is given by the equation:

Volume = Mass / Density

In this case, the mass of the sample is 1255 mg, which is equivalent to 1.255 g. The density of the substance is 19.3 g/cm3. Plugging in the values, we get:

Volume = 1.255 g / 19.3 g/cm3 = 0.0649 cm3

So, a 1255 mg sample of the substance with a density of 19.3 g/cm3 would occupy a volume of 0.0649 cm3. This answer should be reported to three significant figures, which is consistent with the precision of the mass measurement.

learn more about Volume here:

brainly.com/question/13338592

#SPJ4

If the partial pressure of the diatomic gas is 0. 780 bar, then the total pressure of the system is 3.64 bar

Given data :-

Number of particles of diatomic gas = 3

Number of particles of monatomic gas = 6

Number of particles of another monoatomic gas = 5

Total number of particles (or) moles in the gas mixture = 3 + 6 + 5 = 14 particles (or) moles

We know that,

Mole fraction = Number of moles of given gas / Total number of moles

Therefore,

Mole fraction of diatomic gas = Number of moles of diatomic gas / Total number of moles of mixture

=> [tex]\frac{3}{14}[/tex]

=> 0.214

Given partial pressure of diatomic gas = 0.780 bar

Raoult's law states that a gas's partial pressure in a mixture (or system) is equal to its mole fraction times the mixture's overall pressure.

Partial pressure of gas = Mole fraction × Total pressure

So,

Total pressure of system = Partial pressure of diatomic gas / Mole fraction of diatomic gas

[tex]P_{Total} = \frac{0.780}{0.214}[/tex]

=> [tex]P_{Total} = 3.64[/tex] bar.

To know more about Raoult's law

brainly.com/question/28304759

#SPJ4

Between methoxybenzene and toluene, toluene has greater separation because toluene has an attached methyl group, whereas benzene does not .

A hydrogen molecule is referred to as ortho hydrogen if both of its nuclei spin in the same direction. When both hydrogen nuclei are spinning in opposite directions, the molecule is referred to as para hydrogen. Ordinary dihydrogen is created when ortho and para hydrogen are in equilibrium.

Ortho substitution has two substituents in the ring's 1 and 2 locations, whereas para substitution has two substituents in the 1 and 4 positions. This is the main distinction between ortho para and meta substitution. Meta replacement, on the other hand, has two substitutes in positions 1 and 3.

To know more about para hydrogens visit :

https://brainly.com/question/10718240

#SPJ4

A metal's chemical properties can affect its ability to withstand the high temperatures and pressures of a rocket launch.

How is chemistry involved in making rockets?

Chemistry is involved in making rockets in a variety of ways. The fuels used to power rockets are a mixture of flammable liquids and solid propellants, and the chemical reactions that occur when these propellants are ignited provide the thrust necessary to propel the rocket upwards. The fuels used in rocket propulsion also require precise control of their chemical composition to ensure optimal efficiency and performance. The materials used in rocket construction must be able to withstand extreme temperatures and pressures, and the use of various chemical treatments and coatings helps to achieve this. Finally, the development of new rocket fuels and other materials used in rocket construction requires extensive research and development in the field of chemistry.

Metals with higher melting points and corrosion resistance are more suitable for use in rocket construction as they will be able to withstand the harsh environment of a launch. Additionally, certain metals may be more reactive than others and can produce dangerous byproducts when exposed to extreme temperatures. Therefore, understanding the chemical properties of the metal being used can help ensure the rocket is able to withstand the launch and not cause any safety hazards.

Therefore, to withstand the high temperatures and pressures of a rocket launch chemical property of a metal is used.

To learn more about making rockets from the link

https://brainly.com/question/28596310

#SPJ1

88 degrees the final temperature if delta Hcombustion is -37 kJ/G and the specific heat of water is 4. 18 J/gK

delta H= Cs* delta T

delat T= delta h / cs(specific heat)

delta T= -37/4.18

delta T = 88 degrees

A calorimeter is used to calculate combustion heats. The specific heat capacity of a substance is defined as the amount of energy needed to raise one gramme of that substance's temperature by one degree Celsius. A material will store heat energy more effectively if its specific heat capacity is higher. When one mole of a substance burns, the quantity of energy produced as heat (q) is measured as the heat of combustion (H°c) (combustion). When a reaction generates heat, it is an exothermic process that releases energy.

Learn more about temperature here:

https://brainly.com/question/11464844

#SPJ4

The volume flow rate in ml/s will depend on the size and design of the trigger, and thus cannot be accurately determined without more information.

To learn more about The volume flow rate refer to:

https://brainly.com/question/14090152

#SPJ1

The empirical formula of the compound containing Mg and N is Mg₃N₂.

The outcome of the Mg + N2 reaction is:

Mg + N₂ → MgₓNₙ

the following are contained in 0.55g of magnesium:

Mg is represented as 0.55g x (1 mol / 24.305g) = 0.0226 moles.

Due to the product's 0.76g mass, the mass of nitrogen is as follows:

0.76g minus 0.55g equals 0.21g of nitrogen.

0.015 moles of N are equal to 0.21g x (1 mol / 14g).

The ratio of N:Mg in moles is:

0.0226 / 0.015 = 1.5. This indicates that you have 1.5 Mg atoms for every N atom. The problem's empirical formula, which is the simplest whole-number ratio of atoms in a compound, is:Mg₃N₂

learn more about empirical formula Refer:brainly.com/question/14044066

#SPJ4

Dr. Fowler tests her hypothesis in order to rule out another likely alternative through the fact that it evaluates the key vulnerabilities to climate change, and assesses aggregate damage levels and the role of multiple stresses.

A hypothesis may be defined as a testable statement about the relationship between two or more variables or a proposed explanation for some observed phenomenon.

According to the context of this question, if the rats of Group A live outdoors, it seems to learn more quickly. This is because of the presence of a specific trait. This trait is due to genetic differences between the two groups of rats which governs the specific phenotypic expression in the overall presence of genes or alleles.

Therefore, the fact that it evaluates the key vulnerabilities to climate change, and assesses aggregate damage levels and the role of multiple stresses.

To learn more about Genetic differences, refer to the link:

https://brainly.com/question/14926046

#SPJ1

Explanation:

Al2(SO4)3 : Ca(OH)2

1 mol. : 3 mol (from equation)

2 mol : 6 mol

No, Covalent bond cant not be formed between a metal and non-metal.  ionic bonds between metals and nonmetals.

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed. Bonding electrons are collectively referred to as the electrons that are present between the two nuclei. The "glue" that holds the atoms in molecular units together is the bound pair. By taking into account whether each element is a metal or nonmetal, it is possible to forecast the kind of bond that will develop between two elements. Covalent bonds between nonmetals, ionic bonds between metals and nonmetals, and metallic bonds between metals are the three types of bonds that typically form. Covalent bonds, which produce an irreversible binding and a high surface coverage, are mostly generated between side-chain-exposed functional groups of proteins and properly modified transducer surfaces. Covalent immobilisation is one of the most often utilised techniques, and it involves randomly coupling the antibody's free amino groups to a sensor surface.

For much more questions on covalent bond, Refer:

https://brainly.com/question/12732708

#SPJ4

The molar mass of Ferric Oxide (Fe2O3) is calculated as follows:

Fe: (2 atoms) x (56 g/mol) = 112 g/mol

O: (3 atoms) x (16 g/mol) = 48 g/mol

Fe2O3 = 112 g/mol + 48 g/mol = 160 g/mol

The molar mass of Lactic acid (C3H6O3) is calculated as follows:

C: (3 atoms) x (12.01 g/mol) = 36.03 g/mol

H: (6 atoms) x (1.01 g/mol) = 6.06 g/mol

O: (3 atoms) x (16 g/mol) = 48 g/mol

C3H6O3 = 36.03 g/mol + 6.06 g/mol + 48 g/mol = 90.09 g/mol

The molar mass of water (H2O) is calculated as follows:

H: (2 atoms) x (1.01 g/mol) = 2.02 g/mol

O: (1 atom) x (16 g/mol) = 16 g/mol

H2O = 2.02 g/mol + 16 g/mol = 18.02 g/mol

The molar mass of ascorbic acid (C6H8O6) is calculated as follows:

C: (6 atoms) x (12.01 g/mol) = 72.06 g/mol

H: (8 atoms) x (1.01 g/mol) = 8.08 g/mol

O: (6 atoms) x (16 g/mol) = 96 g/mol

C6H8O6 = 72.06 g/mol + 8.08 g/mol + 96 g/mol = 176.14 g/mol

12. All 206 of our bones are structures.

13. Bases are built on solid ground so that they can support the structure.

14. When pulling on a rope you are giving it -tension

15. Tall buildings are seismically reinforced so they will not fall in an earthquake.

An arrangement and organization of related components in a physical object or system, or the organized object or system, is referred to as a structure.

Material structures include both natural and man-made objects, such as biological organisms, minerals, and chemicals, as well as man-made structures like buildings and machines.

Learn more about structures on:

https://brainly.com/question/27231354

#SPJ1

The system will throw a comparison error if a programmer attempts to compare two different datatypes in the C++ language, is the answer. An address in memory is what a pointer is, although an integer is a separate datatype.

Integral, Floating Point, Character, Character String, and Composite types are the five fundamental categories of data types recognised by the majority of current computer languages. Within each of these broad categories, numerous particular subtypes are established. Integral, Floating Point, Character, Character String, and Composite types are the five fundamental categories of data types recognised by the majority of current computer languages. Within each of these broad categories, numerous particular subtypes are established. Unquoted upper-case terms, such as String, are used to represent data types. Data types can occasionally accept parameters, which makes them more specialised. As an illustration, the data type for strings with at least eight characters is String[8].

Learn more about datatypes here:

https://brainly.com/question/13383828

#SPJ4

S (reaction) = 2.70 + 1.205 - 2,109.6 ,S ° (reaction) = 125.8 J / mol K

Entropy (S, abbreviated as entropy) in thermodynamics represented the degree of system disorder.

Entropy, like other thermodynamic concepts, can only be determined from the beginning and ending states.

Then energy is converted into different forms, entropy will also change.

Standard entropy data allow for the calculation of S °'s value.

The formula is S ° (reaction) = S ° (product) - S ° (reagent)

The standard thermodynamic quantities for chemical substances at 25 °C for entropy can be found in the CRC Handbook of Chemistry and Physics data table, 84th Edition (2004) as follows: (Supporting evidence can be found in other data.)

NH3 (g) = 192.8 J/mol K.

O2 (g) = 205 J per mole of K

Water (g) = 188.8 J/mol K

H2O (mol) = 70 J/mol K

NO2 (g)=240.1 J/mol K

H₂O₂ (l) = 109.6

S (reaction) = 2.70 + 1.205 - 2,109.6

S ° (reaction) = 125.8 J / mol K.

To learn more about reaction refer to:

https://brainly.com/question/11231920

#SPJ1

Ice sheets, ice caps, glaciers, icebergs, bogs, ponds, lakes, rivers, streams, and groundwater are the sources of freshwater.

Go through the given link below to know more about freshwater:-

https://brainly.com/question/898979

#SPJ4

The oxidation-reduction (redox) process that occurs when hydrogen and oxygen combine to generate water is a type of chemical reaction. It is true that when hydrogen and oxygen .

combine to create a water molecule, they acquire the capacity to turn into liquids, although at normal temperature and pressure, hydrogen and oxygen are gases.The oxidation-reduction (redox) process that occurs when hydrogen and oxygen combine to generate water is a type of chemical reaction. It is true that when hydrogen and oxygen . It is true that when they combine to create a water molecule, oxygen and hydrogen both lose electrons. Hydrogen loses one electron while oxygen obtains two electrons. This is also true; hydrogen and oxygen are extremely combustible gases, but when they combine to create a water molecule, they become inflammable and will no longer burn.

learn more about hydrogen  here:

https://brainly.com/question/28937951

#SPJ4

The freezing point of solution is -1.53°C.

When a solute is added to the original solvent, the freezing point decreases. The freezing point depression formula is:

ΔT = kf×m×i

Where i is the Van't Hoff factor, m is the molality of the solution (moles CaBr2 -solute- / kilogram water -solvent), and Kf is the freezing point depression constant of the solvent (1.86°C/m).

Molality of the solution is:

-moles CaBr₂ (Molar mass:

232.8g ₓ (1mol / 199.89g) = 1.16 moles

Molality is:

1.16 moles CaBr₂ / 4.23kg water = 0.274m

The amount of solute produced after one mole of solid solute dissolves is represented by the Van't Hoff factor, for CaBr₂:

CaBr₂(s) → Ca²⁺ + 2Br⁻

When 1 mole of a solid solute is converted into 3 moles of ions, the Van't Hoff factor is 3.

Putting:

ΔT = kf×m×i

ΔT = 1.86°C/m×0.274m×3

ΔT = 1.53°C

The freezing point of water decreases in 1.53°C. As freezing point of water is 0°C, the freezing point of the solution is -1.53°C.

To know more about freezing point from the link

brainly.com/question/28032179

#SPJ4

0.0000128 mole TiO2 in a jelly bean.Any chemical molecule, whether created chemically or naturally, that exclusively contains the elements titanium and oxygen is referred to as titanium oxide.

With the chemical formula TiO2, titanium dioxide, sometimes referred to as titanium(IV) oxide, is an inorganic substance. It is also known as titanium white, Pigment White 6 (PW6), or CI 77891 when used as a pigment.

Step 1: Given data

Number of moles of titanium (IV) oxide in 1 jelly bean (n):7. 69x10^( 18)

Step 2: Calculate the mass (in grams) corresponding to 7. 69x10^( 18) moles of TiO₂

To convert moles to mass, we need a conversion factor. In this case, it is the molar mass of TiO₂: 79.87 g/mol.

7. 69x10^( 18) mol TiO₂ × 79.87 g TiO₂/1 mol TiO₂

= 1.64*10^(20)g TiO₂

when mass is reversely converted to moles then the moles:0.0000128 mole TiO2.

Although mineral forms might seem black, it is a solid that is insoluble in water and is white in colour. It may be used as a pigment in a variety of products, such as paint, sunscreen, and food colouring. Its E number for usage as food colouring is E171.

learn more about titanium dioxide Refer:brainly.com/question/16978406

#SPJ4

This lack of genetic variation can lead to a decrease in the population’s ability to survive and adapt to changing environments, resulting in a population that is more at risk of extinction.

To learn more about The reproductive strategy refer to:

https://brainly.com/question/10413000

#SPJ1

An aqueous solution of the silver fluoride, AgF, contains 2.96 grams of the silver fluoride and 17.6 grams of the water. The percentage by mass of silver fluoride in the solution is 14.3 %.

The mass of the silver fluoride = 2.96 g

The mass of the water = 17.6 g

The mass of the solution = mass of the AgF + mass of water

                                         =  2.96 g + 17.6 g

                                         = 20.56 g

The percentage by mass is expressed as :

The percentage by mass of AgF = (mass of AgF / mass of solution) ×100%

The percentage by mass of AgF = (2.96 g / 20.56 ) ×100%

The percentage by mass of AgF = 14.3 %                                  

To learn more about silver fluoride here

https://brainly.com/question/29515485

#SPJ4

5.7g of xenon tetrafluoride would be required to react completely with 1.000 g of water.

To solve such questions, we need to find out the number of moles present for the given compunds/molecules. Balancing the equation would be our first step. The balanced equation would be :-

XeF4 + 2H2O → Xe + 4HF + O2XeF4

So, the stoichiometric ratio moles of xenon tetrafluoride and water is 1:2

Given : We have 1g of water

No. of moles of water = given weight/molar weight = 1/18 = 0.055

Let the no. of moles of xenon tetrafluoride present be x.

Balancing the ratios:-

1:2 = x:0.055

x = 0.055/2

x = 0.0275

Hence, the no. of moles of xenon tetrafluoride present is 0.0275

No. of moles = given weight/molar weight

0.0275 = required weight / 207

Hence, mass of xenon tetrafluoride = 0.0275 x 207 = 5.6925g , we can say almost 5.7g is required.

To know more about moles :

https://brainly.com/question/15356425

#SPJ4

1) H is partially positive F is partially negative

2) H is partially positive Br is partially negative

3) H is partially positive O is partially negative

4) C is partially positive O is partially negative.

When we talk about electronegativity, we mean the fact that, in the compound, there is a part that is partially negative and there is a part that is partially positive.

The part of the compound that is partially negative is the part of the compound that is able to attract the pair of electrons that are shared by the two atoms to itself.

Learn more about electronegativity:https://brainly.com/question/17762711

#SPJ1