Answer:
energy and the equilibrium constant.
The sign of the standard free energy change ΔG° of a chemical reaction determines whether the reaction will tend to proceed in the forward or reverse direction.
Similarly, the relative signs of ΔG° and ΔS° determine whether the spontaniety of a chemical reaction will be affected by the temperature, and if so, in what way.
ΔG is meaningful only for changes in which the temperature and pressure remain constant. These are the conditions under which most reactions are carried out in the laboratory; the system is usually open to the atmosphere (constant pressure) and we begin and end the process at room temperature (after any heat we have added or which is liberated by the reaction has dissipated.) The importance of the Gibbs function can hardly be over-stated: it serves as the single master variable that determines whether a given chemical change is thermodynamically possible. Thus if the free energy of the reactants is greater than that of the products, the entropy of the world will increase when the reaction takes place as written, and so the reaction will tend to take place spontaneously. Conversely, if the free energy of the products exceeds that of the reactants, then the reaction will not take place in the direction written, but it will tend to proceed in the reverse direction.
Give examples of solid materials that dissolve completely in liquid materials.How about those that do not?
ANSWER: Things like salt, sugar and coffee dissolve in water. They are soluble. They usually dissolve faster and better in warm or hot water.
Many materials, such as rocks, expand (get larger) when they are heated and contract (shrink) when they are cooled. This change
in size can cause cracks to form and break large rocks into smaller pieces.
In this example, what is caused by heating and cooling?
OA. decay
ОВ.
weathering
OC.
erosion
OD
earthquakes
Answer:
OB: weathering
Explanation:
the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.
Answer:
weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D
Luca made the following chart for Earth’s four basic movements. What needs to be correct on his chart
Answer:
The solar system speed and Milky Way speed should be switched
Explanation:
Answer:
Explanation:
The solar system speed and Milky Way speed should be switched
Elements in the same period have _____ in common?
-
Answer:
The elements that have the same number of energy levels or the orbitals.
Explanation:
They have he same number -- energy levels
Gallium is produced by the electrolysis of a solution made by dissolving gallium oxide in concentrated NaOH(aq). Calculate the amount of Ga(s) that can be deposited from a Ga(III) solution using a current of 0.710 A that flows for 60.0 min.
Answer:
0.00883 mol
Explanation:
Let's consider the reduction reaction of gallium.
Ga³⁺(aq) + 3 e⁻ ⇒ Ga(s)
We can establish the following relationships:
1 min = 60 s1 A = 1 C/s1 mole of electrons have a charge of 96486 C (Faraday's constant)When 3 moles of electrons circulate, 1 mole of Ga is depositedThe amount of Ga deposited using a current of 0.710 A that flows for 60.0 min is:
[tex]60.0min \times \frac{60s}{1min} \times \frac{0.710C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molGa}{3mole^{-}} = 0.00883 molGa[/tex]
What name is given to the elements that appear in the right-most column of the periodic
table?
- Alkali metals
- Alkaline earth metals
- Transition metals
- Noble gases
(NOBLE GASES IS ANSWERR)
Answer:
Noble gases... (You already know...)
Explanation:
The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.
Hope this helped!
Answer:
Noble gases
Explanation:
The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.
In the reaction of silver nitrate with copper metal, metallic silver comes out of solution, and the solution turns blue. This as a ________ reactio
Answer:
Single displacement reaction.
Explanation:
Hello!!
In this case, since the reaction between silver nitrate and copper metal is:
[tex]2AgNO_3(aq)+Cu(s)\rightarrow 2Ag(s)+Cu(NO_3)_2(aq)[/tex]
As silver was forming silver nitrate, due to the presence of copper, which has the capacity to displace silver out of the salt, we notice the formation of solid silver and a resulting copper (II) nitrate which is blue in aqueous solution.
Therefore, this is a single displacement reaction, because the the lonely copper displaced the silver.
Best regards!
When the absolute value of the difference in electronegativity of two adjacent atom in a compound is 1, they are most likely bonded by:____________.
a. nonpolar covalent bond
b. a polar covalent bond
c. ionic bonding
Answer:
A polar covalent bond
Explanation:
When the absolute value of the difference in electronegativity of two bonded atoms is between 0.4 and 1.8 they tend to form polar covalent bonds.
Which statement describes an example of a chemical property of a metal statue?
O It is metal.
O It can tarnish.
OIt is solid.
OIt is shiny.
Answer:
The answer is "it can tarnish"
Explanation:
The statement describes an example of a chemical property of a metal statue is that it can tarnish.
Chemical properties are defined as those properties which become evident during or after a chemical reaction has taken place.
These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and used for building up chemical classifications.
The major chemical properties include flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.
Learn more about chemical property,here:
https://brainly.com/question/1935242
#SPJ7
Write a description of your dream car by using powerful adjectives. Write about 100-120 words
Answer:
It was a cold December night shortly after dusk, a likely setting for an event that would prove to be life altering. As fate would have it, this would be the night that I lost the material possession that truly meant the most to me. I would lose the one thing that gave me much pride and joy and excitement. I often think back and liken us to a newlywed couple, for we had only been together for 18 months and were still very much honeymooning. It was a night, a moment, that even now scoffs and mocks me as I travel thither and yonder with her replacement. But she can never be truly replaced and to call my current fix a replacement seems like a sort of blasphemy.
I called her my Blue Angel. That's right! She was a brand new 1999 Atlantic blue Ford Mustang fully equipped with white racing stripes on each side, dark window tint, a rear spoiler, and a post-factory sound system that I installed personally just to complete the "dream ride" effect. We met on April 24, 1999,when my parents introduced us and told me she was all mine as a reward for graduating high school as valedictorian. And what a reward she turned out to be. We went everywhere together. I took her out to eat. When I'd go play ball somewhere, she went with me. Every day from April 24, 1999, to December 22, 2000, we were together. We were bonding in a way a young man can bond with no other, and there truly was no other for me. Other guys had bigger trucks and faster cars, but where my Blue Angel was lacking in size and power, she more than made up for in pure, unadulterated, raw emotion, She never let me down; she was always looking her best and never longing for attention from me or any of the other countless admirers and fans she won over for...
Explanation:
How many atoms of phosphorus are in 5.70 mol of copper(II) phosphate?
Answer:
Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i
Explanation:
The equation 2NaNO3 + CaCl2 - 2NaCl + Ca(NO3)2 is balanced. How many atoms of sodium (Na) are there on either side of the equation? one two four six
Answer:
fou maybe
Explanation:
it was my answer hehe
Answer:2
Explanation:
Because it is
In chemical reaction atoms are what?
Answer:
In chemical reaction atoms are reactantsA common misconception people have is that sugar is energy and energy is sugar but you know better. Give me ideas of a clear explanation that could be used to clear up this misconception, please?????!!!!!!
23.1 g of HCl (a strong acid) is added to water to make 1250 mL of solution. Calculate [H3O+] and pH of the solution
Answer:
Following are the solution to this question:
Explanation:
[tex]\to HCl \ mol = \frac{23.1 \ g}{36.5 \frac{g}{mol}} = 0.633 \ mole\\\\\\\to HCl \ molarity = \frac{ 0.633 \ mole }{1.25 L} \\\\[/tex]
[tex]=0.5064 \ m[/tex]
[tex]HCl +H_2O \longrightarrow H_3O^{+} + Cl^{-}\\\\\\[/tex]
[tex][H_3O^{+}] =[HCl] \\\\\to [H_3O^{+}] =0.5064 \ m \\\\\to PH =-\log [H_3O^{+}] \\\\[/tex]
[tex]= -\log (0.5064)\\\\= 0.295 \\\\=0.3[/tex]
Mr. Juan is husband of Maria, before they get married Maria knows that her husband cannot make a baby since he cant produce sperm. But during their 2 years in marriage, Maria got pregnant. Is Juan can file a case to Maria? What it is? Support your answer?
Answer:
yes but first he need to check himself
Explanation:
bcoz if he cannot produce a sperm than she might have cheated him and the baby might be of someone other.
Determine the molarity of a solution prepared by dissolving 0.198 g of "KHP" (C8H5O4K) in enough water to make 125 mL of solution.
When the solution is found and titrated with aqueous sodium hydroxide, the endpoint is reached after the addition of 27.80 mL of base solution. How many moles of NaOH reacted? What is the concentration of the NaOH?
Answer:
0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.
Explanation:
Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.
To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:
Moles KHP -Molar mass: 204.22g/mol-:
0.198g * (1mol / 204.22g) = 0.0009695 moles KHP
Molarity:
0.0009695 moles KHP / 0.125L = 0.007756M KHP
NaOH reacts with KHP as follows:
NaOH + KHP → Na⁺ + KP⁻ + H₂O
That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:
0.0009695 moles NaOH reacts
In 27.80mL = 0.02780L the NaOH was contained. Molarity is:
0.0009695 moles NaOH / 0.02780L =
0.03488M NaOH
Moles of NaOH added will be "0.034".
According to the question,
→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]
By substituting the values, we get
[tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]
[tex]= 0.0077 \ M[/tex]
Let,
The number of moles added be "[tex]M_2[/tex]".Now,
→ [tex]M_1 V_1 = M_2 V_2[/tex]
→ [tex]0.0077\times 125=M_2\times 27.8[/tex]
→ [tex]M_2 = 0.034 \ moles[/tex]
Thus the above answer is appropriate.
Learn more:
https://brainly.com/question/23931328
Which of the following belong to a category called the main group of elements
A halogens
B nonmetals
C alkaline metal
D transition elements
Answer:
C. Alkaline Metal ok thanks
Every element in group one has ______________ electron in its outer shell. Every element in group two has _______________ electrons in its outer shell.
need help
The hybrid orbital set used by the central atom in no3- is_____ and why?
a. sp
b. sp3
c. SP2
d. sp3d2
e. sp3d
Answer:
c. SP2
Explanation:
The image in the diagram below shows the structure of NO₃⁻
Nitrogen is the central atom with the electronic configuration of 1s² 2s² 2p³.
So in its outermost shell, it has 3 electrons and the hybridization is sp²
However,
According to Hund's rule:
The ground state of Nitrogen is;
1s² 2s² 2p³
↑↓ ↑ ↑ ↑ ↑
At the excited state when it is attached to 3 different oxygen ions, we have:
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁴
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑ ↑
Thus, the 3 sp² orbital lies in a plane and form 3 N - O σ- bond and one π- bond.
because the coldness in the ice cream and the suns gamma rays are hitting the ice cream and then it will start to melt. and that is why ice cream melts.
Answer:
...
Explanation:
A solution is made by adding 5.01 g of iron sulfate to 75.3 g of water. What is the mass percentage of iron sulfate in this solution?
Answer:
6.24 % of FeSO₄
Explanation:
Solute mass: 5.01 g of FeSO₄
Solvent mass: 75.3 g of water
Solution mass = solute mass + solvent mass
5.01 g + 75.3 g = 80.31 g
We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,
In 80.31 g of solution we have 5.01 g of solute
In 100 g solution, we may have (5.01 . 100)/ 80.31 = 6.24 g of solute.
This is the mass percentage: 6.24%
Which cannot be chemically broken down into simpler substances?
O compound
O element
O solution
O mixture
Answer:
an element.
Explanation:
it is the purest form
Answer:
b
Explanation:
calculate the (m/v) of nacl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml
Answer:
2.5%
Explanation:
Given
M1 = 7.50%
M2 = ?
V1 = 25.0mL
V2 = 75.00mL
M1V1=M2V2
7.5x25=M2x75
M2=2.5%
The NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.
What is solution?Solution is defined as a continuous variation of two or more substances in their relative proportions up to what is known as the limit of solubility. A solute is the name for the substance that dissolves to create a solution. A solvent is the material that a solute will dissolve in. Sugar is the solute and water is the solvent in a sugar-water solution.
To calculate the molarity of NaCl
We use M1V1 = M2V2
Given M1 = 7.50 (m/v)%
V1 = 25.0 ml
V2 = 75.0 ml
M2 = M1 V1 / V2
M2 = 7.50 x 25.0 / 75.0
M2 = 2.5 (m/v)%
Thus, the NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.
To learn more about solution, refer to the link below:
https://brainly.com/question/7932885
#SPJ2
What is the answer? Please
Answer:
Cell
Explanation:
I just passed this unit a month ago.
Answer:
It is 6. Cell
Explanation:
Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.
I really hope this helped. God bless you and have a great day! :-)
47. A substance has a half life of 3min. After 5 min, the
count rate was observed to be 400 what was its
count rate at rate at zero time?
2
Answer:
1000
Explanation:
PLS GIVE BRAINLIEST
Three isotopes of argon occur in nature. Calculate the average atomic mass of argon given the following relative atomic masses and abundances of each of the isotopes.
Isotope Relative Atomic Mass Abundance
Ar-36 35.97 amu 0.337%
Ar-38 37.96 amu 0.063%
Ar-40 39.96 amu 99.600%
a
35.97 amu
b
37.95 amu
c
39.95 amu
d
38.96 amu
Answer:
whats the question
Explanation:
Answer:
Calculate the average atomic mass of argon to two decimal places, given the following relative masses and abundances of each of the isotopes: argon-36 (35.97 amu; 0.337%), argon-38 (37.96 amu; 0.063%), and argon-40 (39.96 amu; 99.600%). ... So the atomic mass of Ar is 0.99639. 96 + 0.0006337. 96 + 0.00337*35.97 = 39.957.
Explanation:
hope this help
why does 3-methylcyclohexene elute before
1-methylcyclohexene in gas chromatography?
Answer: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%. This is because 1-methylcyclohexene is the major product with the more stable carbocation intermediate and 3-methylcyclohexene is the minor product with the less stable carbocation intermediate.
Explanation: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%
What is the answer? Please
Answer:
Leeunwenhoek
Explanation:
Anton Von Leeunwenhoek was the first scientist to observe live cells and in greater details. He described spirogyra in the mid 15th century.
His contribution to the scientist community opened up the world of micro-organisms. He produced several microscopes to observed the world of micro-organisms that we cannot see with our naked eyes. He also studied plants extensively.The properties of compund are different from the properties of their constituenr
Answer: Atoms of carbon and hydrogen
Explanation: