Answer:
a) electric field at point P must be zero
b) harged must be positive
c) force ais in the direction of the electric field
d) force is in the opposite direction to the electric field
e) force is in the opposite direction to the field
Explanation:
After reading your exercise, it is unfortunate that the diagram did not come out, but we are going to answer the questions in general.
a) force on a charge (+) is zero
this implies that the electric field at point P must be zero
F = q E
b) the magnitude of the charge on the left is on the right
this indicates that the charged must be positive since the lines must exit the charge
c) force on load directed towards (direction not indicated)
since the charge is positive the force at point L is in the direction of the electric field at this point
d) force on test load (-) does not indicate direction
The force on a negative charge is in the opposite direction to the electric field at point J
e) Force on a test load (-) at point N
the force is in the opposite direction to the field at point N
convert 0.0345mW
to MW
Answer:
3.45e-11MV
that is ur answer
Tyler and Jim race each other up a mountain on their bicycles. Tyler rides a road bike on the switchbacks of the twisting and turning mountain road. Jim rides a mountain bike and follows a direct, but steeper, straight-line path up the mountain. They start at the same time and place at the bottom of the mountain and finish at the same time and place at the top of the mountain. From start to finish a. whose distance traveled was longer? b. whose displacement was longer? c. which rider had the faster average speed? d. which rider had the faster average velocity? e. who won the race?
Answer:
Explanation:
Displacement is minimum distance between initial and final point .
Distance is total length of path covered in a journey .
a )
Tyler covered a longer distance in the journey because total length of path covered by him is longer due to curved path .
b )
Both have same displacement , because minimum distance between initial and final point in both the case is same .
c )
average speed = distance / time
as time is same for both the case ,
average speed ∝ distance
As distance covered by Tyler is more , his average speed is more .
d )
average velocity = displacement / time
As both displacement and time are same in both the case , average velocity in both the case is same .
e )
They start at the same time and place at the bottom of the mountain and finish at the same time , both have tie and nobody won the race , in spite of speed of Tyler being greater .
Magnus has reached the finals of a strength competition. In the first round, he has to pull a city bus as far as he can. One end of a rope is attached to the bus and the other is tied around Magnus's waist. If a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus a distance of 1.30 meters, how much work does the tension force do on Magnus
Answer:
Workdone = -2730 J
Explanation:
Formula for workdone is;
W = Force × Displacement
Now, according to Newton's 3rd law of motion, to every action, there is an equal and opposite reaction.
In the question given, we are told that a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus. This means that the force exerted by the rope on Magnus acts in an opposite direction to that which Magnus does to the rope.
Therefore, the force will be in the negative direction.
So;
Workdone = -2100 N × 1.3 m
Workdone = -2730 J
How far can a bus carrying small children, travel at a rate of 60 km per hour travel in 2 1/2 hours?
Explanation:
speed = 60km/hr.time = 2¹/2 hr = 5/2 hrdistance = speed × time = 60 ×5/2 = 150kmMARK ME AS BRAINLISTA mole of a monatomic ideal gas at point 1 (101 kPa, 5 L) is expanded adiabatically until the volume is doubled at point 2. Then it is cooled isochorically until the pressure is 20 kPa at point 3. The gas is now compressed isothermally until its volume is back to 5 L (point 4). Finally, the gas is heated isochorically to return to point 1.
a. Draw the four processes and label the points in the pV plane.
b. Calculate the work done going from 1 to 2.
c. Calculate the pressure and temperature at point 2.
d. Calculate the temperature at point 3.
e. Calculate the temperature and pressure and point 4.
f. Calculate the work done going from from 3 to 4.
g. Calculate the heat flow into the gas going from 3 to 4. g
Answer:
(a). Check attachment.
(b). 280.305 J.
(c). 31.81 kpa; 38.26K.
(d). 24.05K.
(e). 24.05k; 40kpa.
(f). -138.6J.
Explanation:
(a). Kindly check the attached picture for the diagram showing the four process.
1 - 2 = adiabatic expansion process.
2 - 3 = Isochoric process.
3 - 4 = isothermal process.
4 - 1 = isochoric process.
(b). Recall that the process from 1 to is an adiabatic expansion process.
NB: b = 5/3 for a monoatomic gas.
Then, the workdone = (1/ 1 - 1.66) [ (p1 × v1^b)/ v2^b × v2 - (p1 × v1)].
= ( 1/ 1 - 5/3) [ (101 × 5^5/3) × 10^1 -5/3] - 101 × 5.
Thus, the workdone = 280.305 J.
(c). P2 = P1 × V1^b/ V2^b = 101 × 5^5/3/ 10^5/3 = 31.81 kpa.
T2 = P2 × V2/ R × 1 = 31.81 × 10/ 8.324 = 38.36k.
(d). The process 2 - 3 is an Isochoric process, then;
T3 = T2/P2 × P3 = 38.26/ 31.82 × 20 = 24.05K.
(e). The process 3 - 4 Is an isothermal process. Then, the temperature at 4 will be the same temperature at 3. Tus, we have the temperature; point 3 = point 4 = 24.05k.
The pressure can be determine as below;
P4 = P3 × V3/ V4 = 20 × 10/ 5 = 200/ 5 = 40 kpa.
(f) workdone = xRT ln( v4/v3) = 1 × 8.314 × 24.05 × ln (5/10) = - 138.6 J
In a certain region of space the electric potential increases uniformly from east to west and does not vary in any other direction. The electric field:Group of answer choicespoints east and varies with positionpoints east and does not vary with positionpoints west and varies with positionpoints west and does not vary with positionpoints north and does not vary with position
Answer:
Explanation:
The relation between electric field and potential difference is as follows
E = - dV / dr
That means if dV is positive , E is negative . In other words , if potential increases , E is negative or in opposite direction in which potential increases .
Here the electric potential increases uniformly from east to west , that means electric field is from west to east . Since potential is uniformly increasing that means
dV / dr = constant
E = constant
Electric field is constant .
So the option which is correct is
" points east and does not vary with position " .
What is the weight of a 44.5 kg object?
Answer:
98.11 I think
Explanation:
I really hope this helps have a wonderful day
[RM.03H]Which of these is the most likely impact of extensive mining of uranium to produce energy?
land becomes unfit for food production
rainfall decreases because of harmful gases
greenhouse gases are absorbed by the mineral
radiations are better absorbed by the atmosphere
Answer:
land becomes unfit for food production
The new springs will be identical to the original springs, except the force constant will be 5655.00 N/m smaller. When James removes the original springs, he discovers that the length of each spring expands from 8.55 cm (its length when installed) to 12.00 cm (its length with no load placed on it). If the mass of the car body is 1355.00 kg, by how much will the body be lowered with the new springs installed, compared to its original height
Answer:
Explanation:
For original spring , compression in spring due to a load of 1355 kg is
x = 12 - 8.55 = 3.45 cm = .0345 m
spring constant = W / x
= 1355 x 9.8 / .0345
= 384898.55 N /m
Spring constant of new spring
k = 384898.55 - 5655 = 379243.55 N /m
New compression for new spring
= W / k
= 1355 x 9.8 / 379243.55
= .035 m
= 3.50 cm
Difference of compression = 3.50 - 3.45
= .05 cm .
In later case , car will be more lowered by .05 cm .
As every amusement park fan knows, a Ferris wheel is a ride consisting of seats mounted on a tall ring that rotates around a horizontal axis. When you ride in a Ferris wheel at constant speed, what are the directions of your acceleration and the normal force on you (from the always upright seat) as you pass through (a) the highest point and (b) the lowest point of the ride
Answer:
Answer is explained in the explanation section below.
Explanation:
In this question, we are asked to find out the direction of acceleration and direction of the normal force acting upon us from the always upright seat.
a) You pass through the highest point:
When we sit in the Ferris wheel at the any amusement park, and when it starts rotating and the time when we reach the highest point, then the direction of of our acceleration will be towards the center or it will be towards downward direction.
And at the highest point on the Ferris Wheel, the direction of the normal force F acting upon us will be upwards.
b) You pass through the lowest point of the ride:
When we sit in the Ferris wheel at the any amusement park, and when it starts rotating and the time when we reach the lowest point, then the direction of of our acceleration will be towards the center or it will be towards upward direction.
And at the lowest on the Ferris Wheel, the direction of the normal force F acting upon us will be upwards again.
Suppose one Sherpa uses a force of 980 N to move a load of equipment to a height of 20 meters in 25 seconds. How much power is used?
F = 980 N
h = 20 m
t = 25 s
P=? (power)
W=F*h (work)
P=W*t
P=F*h*t
P=980*20*25 =490000 W = 490 kW = 0.49 MW
20. For each improvement in glider design, engineers follow
O A. the written instructions that are provided in the hang glider build kit.
O B. an iterative process of testing, modifying, retesting, and modifying again.
O C. a complicated process of checks and balances while obtaining financing.
O D. a mathematical process, rejecting designs that don't follow blueprint dimensions.
Turn In
Which of the following is the BEST explanation for why oceans have two different types of currents?
Answer:
sddww
Explanation:
szsswa
A shuttle bus slows down with an average acceleration of -2.4 m/s2. How long does it
take the bus to slow from 9.0 m/s to rest?
Answer:
[tex]\boxed {\boxed {\sf 3.75 \ seconds }}[/tex]
Explanation:
Average acceleration is found by dividing the change in acceleration by the time.
[tex]a=\frac{ v_f-v_i}{t}[/tex]
The shuttle bus has an acceleration of -2.4 meters per square second. It slows from 9.0 meters per second to rest, or 0 meters per second. Therefore:
[tex]a= -2.4 \ m/s^2 \\v_f= 0 \ m/s \\v_i= 9 \ m/s[/tex]
Substitute the values into the formula.
[tex]-2.4 \ m/s^2=\frac{0 \ m/s - 9 \ m/s}{t }[/tex]
Solve the numerator.
[tex]-2.4 \ m/s^2 = \frac{-9 \ m/s}{t}[/tex]
We want to solve for t, the time. We have to isolate the variable. Let's cross multiply.
[tex]\frac{-2.4 \ m/s^2}{1} = \frac{-9 \ m/s}{t}[/tex]
[tex]-9 \ m/s *1= -2.4 \ m/s^2 *t[/tex]
[tex]-9 \ m/s=-2.4 m/s^2*t[/tex]
t is being multiplied by -2.4. The inverse of multiplication is division, so divide both sides by -2.4
[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =\frac{ -2.4 \ m/s^2*t}{-2.4 \ m/s^2}[/tex]
[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =t[/tex]
[tex]3.75 \ s=t[/tex]
It takes 3.75 seconds.
How much force is needed to accelerate a Kia Soul with a
mass of 1200 kg to 5 m/s2?
Answer:
[tex]\boxed {\boxed {\sf 6,000 \ Newtons}}[/tex]
Explanation:
Force is the product of mass and acceleration.
[tex]F=ma[/tex]
The mass of the Kia Soul is 1200 kilograms and its acceleration is 5 meters per square second.
[tex]m= 1200 \ kg \\a= 5 \ m/s^2[/tex]
Substitute the values into the formula.
[tex]F= 1200 \ kg * 5 \ m/s^2[/tex]
Multiply.
[tex]F= 6000 \ kg*m/s^2[/tex]
1 kilgram meter per square second is equal to 1 Newton. Our answer of 6000 kg*m/s² equals 6000 N[tex]F= 6000 \ N[/tex]
Answer:
Given :-Mass = 1200 kgAcceleration = 5 m/s²To Find :-Force
Solution :-We know that
F = ma
F = Force
m = mass
a = acceleration
F = 1200 × 5
F = 6000 N
[tex] \\ [/tex]
If a satellite is orbiting the Earth in elliptical motion, then it will move _______________ (slowest, fastest) when its closest to the Earth. While moving towards the Earth (along the path from D to A) there is a component of force in the __________________ (same, opposite) direction as the motion; this causes the satellite to ___________________ (slow down, speed up). While moving away from the Earth (along the path from A to D) there is a component of force in the _________________ (same, opposite) direction as the motion; this causes the satellite to ___________________ (slow
Answer:fastest,same,slow down,opposite,slow
Explanation:
A satellite move fastest when its closest to the Earth. The other correct options are same direction, speed up, opposite direction and slow.
Velocity of a satellite around the planet.If a satellite is orbiting the Earth in elliptical motion, then it will move fastest when its closest to the Earth (based on Kepler's, law).
While moving towards the Earth (along the path from D to A) there is a component of force in the same direction as the motion; this causes the satellite to speed up.
While moving away from the Earth (along the path from A to D) there is a component of force in the opposite direction as the motion; this causes the satellite to slow.
Learn more about motion of satellite here: https://brainly.com/question/25721729
#SPJ2
1. Clara stops for 10 minutes to catch up with a friend.
Answer:
Clara has speed of 80m/min
Explanation:
Clara was jogging at 600 m in 5 minutes. She stopped suddenly which reduced her velocity and then she waited for 10 minutes so that her friends comes near her. She stopped to catch her friend. During this 10 minutes the velocity of Clara is zero. She started to walk again at a slower speed of 80m/min.
Concept Simulation 4.1 reviews the central idea in this problem. A boat has a mass of 4490 kg. Its engines generate a drive force of 4520 N due west, while the wind exerts a force of 890 N due east and the water exerts a resistive force of 1210 N due east. Take west to be the positive direction. What is the boat's acceleration, with correct sign
Answer:
-0.54m/s²
Explanation:
According to Newton's second law of motion
F = ma
Force = mass * acceleration
Given
Mass m = 4490kg
Take the sum of forces
Sum of force along the east = 890+1210 = 2100N
Sum of forces along the west = -4520N
Net force = -4520+2100
Net force = -2420N
Acceleration = Net force/Mass
Acceleration = -2420/4490
Acceleration = -0.54m/s²
Hence the boat acceleration is -0.54m/s²
How can you tell whether an object is neutral
or charged? What would you have to do to test
that object?
Answer:
The number of electrons that surround the nucleus will determine whether or not it is electrically charged or electrically neutral
Explanation:
In a physics lab experiment for the determination of moment of inertia, a team weighs an object and finds a mass of 2.15 kg. They then hang the object on a pivot located 0.163 m from the object's center of mass and set it swinging at a small amplitude. As two of the team members carefully count 113 cycles of oscillation, the third member measures a duration of 241 s. What is the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis
Answer:
0.339 kgm²
Explanation:
We know the period of this pendulum, T = 2π√(I/mgh) where I = moment of inertia of the object about the pivot axis, m = mass of object = 2.15 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.163 m.
Since T = 2π√(I/mgh), making I subject of the formula, we have
I = mghT²/4π²
Now since it takes 241 s to complete 113 cycles, then it takes 241 s/113 cycles to complete one cycle.
So, T = 241 s/113 = 2.133 s
So, Substituting the values of the variables into I, we have
I = mghT²/4π²
I = 2.15 kg × 9.8 m/s² × 0.163 m × (2.133 s)²/4π²
I = 15.63/4π² kgm²
I = 0.396 kgm²
Now from the parallel axis theorem, I = I' + mh² where I' = moment of inertia of object with respect to its center of mass about an axis parallel to the pivot axis
I' = I - mh²
I' = 0.396 kgm² - 2.15 kg × (0.163 m)²
I' = 0.396 kgm² - 0.057 kgm²
I' = 0.339 kgm²
What are regular and irregular reflection of light? plz help its
urgent..
Explanation:
Regular reflection: It is the reflection from a smooth surface such that the light rays are evenly parallel to each other and an image is formed. ... Irregular reflection: It is the diffused reflection from uneven surface such that the light rays are not parallel to each other and do not form an image.
Assuming 84.0% efficiency for the conversion of electrical power by the motor, what current must the 13.0-V batteries of a 716 kg electric car be able to supply to climb a 3.00 x 102 m high hill in 2.00 min at a constant 22.0 m/s speed while exerting 7.00 x 102 N of force to overcome air resistance and friction
Answer:
[tex]\mathbf{ current(I) =1766.67 \ A}[/tex]
Explanation:
Given that:
The air resistance and friction = 700 N
The gravity caused force = 716 × 9.8 = 7016.8
Total force = (7016.8 + 700) N
Total force = 7716.8 N
∴
[tex]13 \times current(I) \times 0.84 = \dfrac{7716.8 \times 300}{2 \times 60}[/tex]
[tex]current(I) \times 10.92= 19292[/tex]
[tex]current(I) = \dfrac{19292}{10.92}[/tex]
[tex]\mathbf{ current(I) =1766.67 \ A}[/tex]
For the questions below, include units if applicable. If necessary, use a separate sheet of paper for 1, 6c and 7c. Tire pressure is in part a function of the temperature of the tire.
1. Based on everyday experience, state (in words) the relationship between tire pressure and temperature. Look at the data below and see if the numbers support your statement.
2. Prepare a hand-drawn plot of the two variables on the reverse side of this worksheet. Include a title, axis labels (with units), and a trendline. Estimate the tire pressure when the temperature is 18.6°C: Estimate the temperature of the air in the tire when the pressure is 37.0 psi: 3.
a. Prepare a plot using graphing software. Include a title, axis labels (with units), the equation of the best-fit Line and the R? value on the graph.
b. Re-write the equation of the best-fit line substituting "Temperature" for x and "Pressure" for y directly on the graph.
c. Attach the fully labeled graph to this worksheet.
4. What is the value of the slope for the relationship between temperature and pressure?
5. Determine the percent error using the definition of percent error: Use 0.145 psi/" for the "Actual" value of the slope. %error = Actual-Experimental % Error Actual
6. Based on your computer-generated graph,
a. visually estimate the tire pressure when the temperature is 18.6°C:
b. calculate the tire pressure at this temperature using the equation of the best fit line: the graph to ensure that this value is reasonable.
c. compare the calculated pressure to the two visually interpolated values (Steps 2 and 6a). Comment on any discrepancies.
7. Based on your computer-generated graph,
a. visually estimate the temperature of the air in the tire when the pressure is 37.0 psi:
b. calculate the temperature of the air in the tire at this pressure: Use the graph to ensure that this value is reasonable.
c. compare the calculated temperature to the two visually interpolated values (Steps 2 and 7a). Comment on any discrepancies.
Data:
Temperature (x) Tire Pressure, psi (y)
12.9°C 3.39 x 10
15.4C 34.25
-2.10 F 2.68 x 10
19.5 °C 3.50 x 10
29.6 'F 36.53
Answer:
All answer are explained below in the explanation section.
Explanation:
1. The pressure varies proportionally with the change in temperature. It can also be observed in our daily lives.
As for example, a pressure cooker uses the same principal to cook food faster. With the increasing temperature, the pressure inside the cooker increases.
Thus after a while, the excess pressure inside is released through the top nozzle. The data shown below supports that pressure and temperature varies linearly.
2. Hand drawn plot is attached in the attachment please refer to the attachment for the hand drawn plot.
Tire pressure at temperature 18.6 degree C is ~ 35 psi.
Temperature at air pressure of 37 psi is ~26.1 degree C
3. a.) Necessary values are included in the stat box. It is attached in the attachment please refer to the attachment.
3. b) The equation becomes: Pressure = 0.176 x temperature + 32.32
3. c) It is already done in part a of this question.
4. The value of the slope estimated from the linear fit is 0.176 +/- 0.094.
5. % Error = [tex]\frac{Actual - Experiment}{Actual} x 100[/tex]
Plugging in the values, we get:
Actual = 0.145, Experimental = 0.176. Thus, percentage error is given by:
% Error = 21.33%
6. a.) Visual estimation of tire pressure at t = 18.6 degree C is ~ 35 psi
6. b.) Estimation of pressure from the best fit line is given by 35.6 psi, which is consistent with the eye estimation value.
6. c.) The eye estimation and the estimation from the line fit are quite comparable. The discrepancy of +/-0.5 psi is within the percentage error calculated in 5.
7. a.) Visual estimation of temperature of the air for a tire-pressure of 37 psi is ~ 26 degree C.
7. b.) Estimation of temperature from best fit value of line is = 26.64 degree C
7 c) The values from eye estimation and evaluated from the fit are quite consistent within a random fluctuation of +/- 0.64 degree C.
difine precision and accuracy
Acceleration is the rate ot change of the velacity a -dejdt so it is the slope of the Velocity vs. Time graph Because it is dficult to drag the person in a consistent and reproducible way use the Expression Evakaator under the Special Features menu for this question lick Reset A and type in the hr on z t * t * t " t in the Expression Evaluator Click the Play button and let the simulation run roughly 5 sin ulation seconds before ressing the Pause but use the zoom buttons to a 쪄 the p s they the screen You should see 8 p at s ar l what you got in the previous question, but much smoother Look at the Postion vs Time. Velocity vs Time and Acceleration vs. Time piets h
a) the velocity is zero but the acceleration is negative
When the person is 8 to to the tight of the origin
b) the velocity is zero but the acceleration is positive
c) both the velocity and the acceleration are zero
d) both the velocity and the acceleraton are nonzero
Answer:
a) the body is changing direction,
b)the body must go to the left and the acceleration to the right
c) the movement has not started.
d) all points of the motion
Explanation:
In this exercise you are asked to find in which position you have the following characteristics of the movement
a) The velocity is zero and the acceleration is negative
This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.
In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases
b) The velocity is zero, but the acceleration is positive
This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right
c) Both are zero
This only occurs where the body is stopped and the movement has not started.
d) both the velocity and the relation are nonzero.
This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration
Any change in the cross section of the vocal tract shifts the individual formant frequencies, the direction of the shift depending on just where the change in area falls along the standing wave. Constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency; expansion of the tract at those same places raises the frequency. Three other major tools for changing the shape of the tract in such a way that the frequency of a particular formant is shifted in a particular direction are the jaw, the body of the tongue and the tip of the tongue. Moving the various articulatory organs in different ways changes the frequencies of the two lowest formants over a considerable range [18].
One way to increase formant frequency is to ________ the vocal tract at a place where the standing wave of a formant frequency exhibits minimum-amplitude pressure oscillations.
a. Stretch
b. Vibrate
c. Contract
d. Expand
Answer:
The correct answer is option D.
Explanation:
It is stated in the question that constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency so to increase formant frequency, the vocal should expand where the standing wave of a formant exhibits minimum-amplitude pressure oscillations. The answer is D.
I hope this helps.
help me pls it’s a usa test prep pretty easy
Answer:
Im 99.99999% sure its c
Explanation:
i cant see the pictures too well
If a wave has a speed of 1000 m/s and frequency of 500 Hz, what is the wavelength?
• 1500 Hz
• 2 m
• 0.05 m
Answer:
2 m
Explanation:
speed=frequency×wavelength
wavelength=speed/frequency
wavelength=1000/500
=2 m
Which option correctly matches the chemical formula of a compound with its name?
A. N2O3, dinitrogen trioxide
B. N2O, trinitrogen dioxide
C. N2O, dinitrogen trioxide
D. N2O3, trinitrogen dioxide
Answer:
A is indeed correct
Explanation:
just did the question
The option that correctly matches the chemical formula of a compound with its name is N₂O₃ dinitrogen trioxide.
What is dinitrogen trioxide?
Dinitrogen trioxide is one of the simple nitrogen oxide. The chemical compound formula of Dinitrogen trioxide N₂O₃.
That is, it consists of 2 molecules of nitrogen, hence the prefix "Di" and 3 molecules of oxygen given the prefix tri.
Thus, the option that correctly matches the chemical formula of a compound with its name is N₂O₃ dinitrogen trioxide.
Learn more about Dinitrogen trioxide here: https://brainly.com/question/21392313
#SPJ2
Which statement best compares coal and ores?
Both are burned for energy.
Both take millions of years to form.
Both require oxygen to form.
Both are used to make coins.
Answer:
Option 2 both take millions of years to form
Explanation:
Both coal and ores take millions of years to form.
What are ores?Ore is a naturally occurring rock or silt that has precious minerals in it that may be extracted, processed, and sold for a profit. These minerals are usually metals. Mining is the process of removing ore from the soil. The valuable metals or minerals are then removed by treating or refining the ore, frequently through smelting.
The concentration of the desired ingredient in an ore is referred to as its grade. To decide if a rock has a high enough grade to be worth mining and is therefore regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction.
Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest. To separate the valuable components from the waste rock, ore must be treated. Numerous geological processes collectively known as ore genesis are responsible for the formation of ore deposits.
Learn more about ore here:
https://brainly.com/question/4712893
#SPJ2