1. Which of the following seismic waves is detected first by the seismograph?
A L-waves B P-waves
CR-waves D.S-waves​

The question is incomplete, The complete question is;

Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. What experimental evidence led to the development of this atomic model from the one before it?

Answer:

A few of the positive particles aimed at a gold foil seemed to bounce back.

Explanation:

This model of the atom was proposed by Ernest Rutherford and was called the planetary model of the atom.

This model is based on an experiment using a gold foil on which alpha particles were focused. Most of the alpha particles passed through the foil. Some of the alpha particles were scattered at large angles and a few seemed to bounce back.

This led to the conclusion that the atom has a massive positive core around which electrons move as planets move around the sun.

Answer:

It is A

Explanation:

0.026 moles is the right answer.

We have that for the Question "How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K?" it can be said that  moles of xenon gas is

n=0.22moles

From the question we are told

How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K?

Generally the equation for the ideal gas is mathematically given as

[tex]n=\frac{Pv}{RT}\\\\n=\frac{0.64*8.5}{0.08206*300}[/tex]

n=0.22moles

Therefore

How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K is

n=0.22moles

For more information on this visit

https://brainly.com/question/1641336  

Answer: 10,000,000,000 kilometers

Explanation:

All the planets in our solar system come into view. But at this distance, only Jupiter and Saturn would be visible with the naked eye.

Answer:

Option C

Explanation: Pass me the brainliest I only need 1

Answer:

mass

Explanation:

Answer:

The answer is C.

Explanation:

If you have absolutely identical objects that have the same weight exactly when they are at the same temperature, then when one object is heated, it will weigh more.

Hope this helps :)

-ilovejiminssi♡

Answer:

Most of the mass of an atom is found in the nucleus.

Explanation:

Answer:

Systems thinking allows us to understand all the parts that make up the whole system.

Explanation:

Just took the test

The systems thinking important because, Systems thinking allows us to understand all the parts that make up the whole system. Therefore, option C is correct.

By considering the world's complexity in terms of links and entire rather than breaking it down into its component components, systems thinking helps us make sense of how complicated the world is. It has been applied as a method for investigating and producing efficient action in challenging situations.

By using a deeper grasp of the surrounding structure and its constituent parts rather than relying just on previous events, systems thinking gives a technique to more accurately forecast future outcomes.

Systems thinking is a discipline in management that focuses on understanding a system by looking at the connections and interactions between the different parts that make up the entire of that defined system. The concept of the "entire system" is a way of looking at an entire organization in relation to its surroundings.

Thus, option C is correct.

To learn more about system thinking, follow the link;

https://brainly.com/question/17174999

#SPJ2

Answer:

Explanation:

Here's the complete question:

A chemist analyzes two samples.One sample contains 14g of element x and 6.0g of element y.The second sample contains 28g of element x and 6.0g of element y. Does it appear that the two samples are the same substance?

The two samples that we are given in the question are different. They are not the same thing because we can deduce that their components ratio are different.

Sample One contains 14g of element x and 6.0g of element y. The ratio of element x to y is 14/6 = 7/3 = 7:3.

Sample Two contains 28g of element x and 6.0g of element y. The ratio of element x to y is 28/6 = 14/3 = 14:3.

Therefore, they have different ratio for their components and are therefore not thesame.

Answer:

This means that the pressure would become double of it's initial pressure.

Explanation:

Key statements:

- Constant temperature

- What happens to the pressure of the gas if the volume was

smooshed down to half its original size?

Basically the question is asking about the relationship between pressure and volume at constant temperature. This is given by Boyle's law.

Boyle's law states that the volume of a fixed mass of gas is inversely proportional to it's volume at a fixed temperature.

This is given by;

P1V1 = P2V2

Where;

P1 = Initial pressure

P2 = Final pressure

V1 = Initial Volume

V2 = Final Volume

From the question;

V2 = V1/2

Inserting it into the equation;

P1 V1 = P2 V1/2

Divide all through by  V1

P1  = P2 /2

P2 = 2 P1

This means that the pressure would become double of it's initial pressure.

Answer:

b it has different kinds of atoms

Answer:

it has different kind of atom

Explanation:

i think

Answer:

The two most basic types of bonds are characterized as either ionic or covalent. In ionic bonding, atoms transfer electrons to each other. ... In contrast, atoms with the same electronegativity share electrons in covalent bonds, because neither atom preferentially attracts or repels the shared electrons.

Explanation:

Answer:

Copper(i) nitrate

Explanation:

That is the correct name.

Answer:

Molecular Formula

Explanation:

Answer:

Kc = 0.333

Explanation:

First of all we state the equilibrium reaction:

C₂H₅OH(aq) + CH₃CO₂H(aq)  ⇄  CH₃CO₂C₂H₅(aq) + H₂O(l)

Initially we start with 1 mol of alcohol and 1 mol of acid. After the reaction goes complete, 0.25 moles of acid have been consumed. As ratio is 1:1, we also consumed 0.25 moles of alcohol. Then, in the product side we finally produced 0.25 moles of water and 0.25 moles of ethyl acetate.

How many moles are available in the reactant side, after the equilibrium?

1 mol - 0.25 moles (that have been reacted) = 0.75 moles.

To determine Kc, we need molar concentrations, so let's see M in products and reactants:

0.75 mol / 0.25 L = 3 M

0.25 mol / 0.25 L = 1 M

We needed to convert 0.250 mL to L → 0.250 mL . 1L/ 1000mL = 0.250 L

Let's determine expression for Kc:

Kc = [H₂O] . [CH₃CO₂C₂H₅]  / [C₂H₅OH] . [CH₃CO₂H]

1 . 1 / 3 . 3 = 1/9 → 0.333

Answer:

84 g of N₂        

Explanation:

We begin from the reaction:

N₂O₄  +  2N₂H₄ →  3N₂  + 4H₂O

  1st step: Find out the limiting reactant.

We convert the mass to moles.

       276 g . 1mol/ 92g = 3 moles of N₂O₄

64 g . 1mol / 32g = 2 moles of hidrazine  

Limiting reactant is the hydrazine. Ratio is 1:2, then for 3 moles of tetroixde I may need 6 moles of N₂H₄. (But I only have 2).

To determine the grams of produced nitrogen we see stoichiometry (2:3)    

2 moles of hydrazine can produce 3 moles of N₂

Definetaly our 2 moles make 3 moles of gas.

We convert the moles to mass.

3 mol . 28g /1mol = 84 g of N₂                                                                                                

N=9.933

Explanation:

no of mole = m÷mr

then ,no of molecules=n×la

Answer:

Electrons

Explanation:

Protons and Neutrons have an amu of 1

Answer:

c. Electrons

Explanation:

Electrons are found outside the nucleus and are the lightest.

Answer:

9.8 m/s2

Explanation:

That is to say, the acceleration of gravity on the surface of the earth at sea level is 9.8 m/s2.

Answer: Nuclear change is distinct from chemical change in that elements change. In the nuclear change the elements can change from one to another. (Nuclei can break apart to form smaller elements.)

Explanation:

Answer:

A nuclear change is a process by which nuclei of certain isotopes change spontaneously or are forced to change to two or more different isotopes.

Explanation:

The three main types of nuclear change in the matter are radioactive natural disintegration, nuclear fission, and nuclear fusion.

I like blowing up stuff too

Answer:

0.664 g are formed by the reaction.

Explanation:

First of all, we determine the reaction:

Mg + CO₂  →  MgO  + CO

We need to determine the moles of the CO₂ by the Ideal Gases Law.

We convert to L, the volume → 400 mL = 0.4L

T° → 23°C + 273 = 296K

P . V = n . R .T

n = P . V / R .T

n = (1 atm . 0.4L) / (0.082 . 296K) → 0.0165 moles

Moles of Mg → 2.5 g . 1mol / 24.3g = 0.103 moles

As ratio is 1:1, CO₂ is the limiting reactant.

For 1 mol of Mg, we need 1 mol of gas

Then, for 0.103 moles of Mg, we need 0.103 moles of gas, but we only have 0.0165 moles.

If we see the product side, ratio is also 1:1

0.0165 moles of CO₂ must produce 0.0165 moles of MgO.

We convert the moles to mass → 0.0165 mol . 40.3 g /1mol = 0.664 g

Answer:

1. 1 mole of NaCl.

2. 1 mole of H₂O.

Explanation:

The balanced equation for the reaction is given below:

HCl + NaOH —> NaCl + H₂O

From the balanced equation above,

1 mole of HCl reacted with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of H₂O.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above, we can see that 1 mole of HCl reacted completely with 1 mole of NaOH. Therefore, HCl is the limiting reactant and NaOH is the excess reactant since we have 3.6 moles of NaOH.

1. Determination of the amount of NaCl produced from the reaction.

NOTE: The limiting reactant is used to determine the maximum amount produced since all of it is consumed in the reaction.

The limiting reactant is HCl and the amount of NaCl produced can be obtained as follow:

From the balanced equation above, we can see that 1 mole of HCl reacted to 1 mole of NaCl.

Thus, 1 mole of NaCl was produced.

2. Determination of the amount of H₂O produced from the reaction.

From the balanced equation above, it is evident that 1 mole of HCl reacted to produce 1 mole of H₂O.

Thus, 1 mole of H₂O was produced.

Explanation:

Specific heat capacity of gold (S)

= 0.126 J /kg°C

mass (m) = 350 g = 0.35 kg

difference in temperature (dt)

= 88.5°C - 24.6°C

= 63.9° C

Now

Energy released (Q)

= m*s*dt

= 0.35 * 0.126 * 63.9

= 2.81799 Joule

Hope it will help :)

Answer:

C4H7

Explanation:

Empirical formula is defined as the  simplest ratios of atoms present in the compound.

The empirical formula for C8H14 is C4H7 as if you multiply each coefficient of C4H7 by 2, it will become C8H14. The chemical name of C8H14 or C4H7 is 1-Methylcycloheptene.

Hence, the correct answer is "C4H7".

Answer:

Fractional distillation

Explanation:

The process of separating petroleum products into its fractions is called fractional distillation.

Fractional distillation is a method of separating a mixture of substances based on the differences in their boiling points.

Petroleum is a mixture of hydrocarbons separated in a large fractionation tower having many trays maintained at different temperatures.

As the vapor containing the petroleum mixture ascends the fractionation tower, the mixture is separated at each tray to yield the various fractions of petroleum.

Answer:

3SiO2  +  2CaC2 ------>   3Si  +   2CaO  +  2CO2

Explanation:

Answer:dude what are you doing here?

Explanation:also i don’t know if I can lol

Answer:

The name of that molecule should be 1-pentyne

so your answr should be B

Explanation:

Molecules are species made up of atoms. The given molecule in the figure is 1-pentyne. Thus, option B is correct.

1-Pentyne is a chemical compound with the formula C₅H₈, and an internal alkyne group between the first and the second carbon atom.

The molecules consist of twelve bonds including the bonds between the carbon-carbon, and carbon-hydrogen. There is one triple or the alkyne bond present and five carbon hence the name of the molecule is 1-Pentyne.

Therefore, the molecule is option b. 1-Pentyne.

Learn more about 1-Pentyne here:

https://brainly.com/question/15397834

#SPJ2

Answer:

the breaking down of rock is known as weathering

Answer:

I'm sorry but there is no diagram above.