As we will soon see in Section 4.5, gasoline is a complex mixture of alkanes and other hydrocarbons, and the term "octane rating" is used as a standard measure of the performance of engine fuel. In the petroleum industry, one area of interest is the use of catalysts to convert unbranched alkanes and branched alkanes with higher octane ratings (Journal of the Japan Petroleum Institute 2004, 47, 1–10). For example, heptane can undergo isomerization in the presence of suitable catalysts to give eight different constitutional isomers, all of which are branched alkanes with the molecular formula C7H16. Draw all eight constitutional isomers, making sure not to draw the same compound twice.

Answer

The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.

Answer:

92.65256 cm^3

Explanation:

To find this, we can simply multiply all three dimensions to get the answer in cubic centimeters, and we get the answer above. If you want to be more specific, we can go by the sigfig rule and the answer would be rounded to 93 cm^3.

Answer:

I'm pretty sure it's electrons

Answer: K and Mg

Explanation:

The first one refers to the atomic radius and increases going down and to the left on the periodic table. K is in between Rb and Na.

Answer:

Explanation:

[tex]\frac{r_1}{r_2} = \sqrt{\frac{M_2}{M_1} }[/tex]

r₁ and r₂ are rate of diffusion of gas having molecular mass of M₁ and M₂

[tex]\frac{31.5}{30.5} = \sqrt{\frac{32}{M_1} }[/tex]

1.0666 = 32 / M₁

M₁ = 30

molecular weight of NO = 14 + 16 = 30

So the unknown gas is NO .

Answer:

C. Physical weathering.

Answer: C. Physical weathering.

Explanation:

Answer:

d. 93 degree Celsius

Explanation:

Plzzzzzzzzzzzzzzzzzzzzzzz mark AS BRAINLIST

Answer:

2.878 (w/w)%

Explanation:

The reaction of NH3 with HCl is:

NH3 + HCl → NH4Cl

That means 1 mole of ammonia reacts per mole of HCl. The moles of HCl that reacts = Moles of ammonia are:

14.22mL = 0.01422L * (0.1063mol HCl / L) = 0.001512 moles HCl = Moles ammonia

In mass:

0.001512 moles NH3 * (17.031g / mol) = 0.02574g of NH3 in the solution.

The concentration in weight percent of the diluted solution is:

0.02574g of NH3 / 4.373g * 100 = 0.5887 (w/w)%

This is the concentration of the diluted solution that was diluted from 10.151g to 10.151g + 39.466g = 49.617g

-Assuming density of water = 1g/mL-

The solution was diluted:

49.617g / 10.151g = 4.888 times.

That means the concentration of NH3 in the original cleaner is:

0.5887 (w/w)% * 4.888 =

Answer:

50 percent

Explanation:

percentage

Answer:

1551.45 MmHg

hope this helps :D

Answer:

Br₂(l) + ΔV → Br₂(g)

Explanation:

When a chemical or phase change occurs during a chemical process some heat is absorbed or released. For the process of vaporization of a substance, the heat (Usually required) is ΔV (How many energy is required for the process occurs).

In the vaporization of Br2 there are required 7.4kcal/mol, Δv. The reaction is:

Answer:

Mass of iron oxide: 79.85 g  

Explanation:

Given data:

Mass of iron = 112 g

Mass of O₂ = 24 g

Mass of iron oxide formed = ?

Solution:

4Fe + 3O₂         →       2Fe₂O₃

Number of moles of Fe:

Number of moles = mass/ molar mass

Number of moles = 112 g/ 55.85 g/mol

Number of moles =  2 mol

Number of moles of O₂:

Number of moles = mass/ molar mass

Number of moles = 24 g/ 32 g/mol

Number of moles =  0.75 mol

Now we will compare the moles of oxygen and iron with iron oxide.

                 Fe           :             Fe₂O₃

                 4             :                2

                 2             :                2/4×2 =  1

                O₂            :             Fe₂O₃

                 3             :                2

                 0.75       :                2/3×0.75 =  0.5

The number of moles of iron oxide formed by oxygen are less thus it will be limiting reactant.

Mass of iron oxide:

Mass = number of moles × molar mass

Mass = 0.5 mol  × 159.69 g/mol

Mass = 79.85 g  

Answer:

136 g Fe2O3

Explanation:

study island

Answer:

D)Polishing..

Answer:

Wouldn't it be rusting

Explanation:

Melting and bending are physical changes so is polishing. so rusting is the only choice, for metal to rust wouldn't it need a chemical change.

Answer:

i did this in school :) but Hot water will rise to the top because it is less dence and cold water will sink to the bottom because it is more dence

Explanation:

Answer:

I think all of the above

Explanation:

Put as brainliest if you wish

Answer:

hope it helps..

Explanation:

'Motile' (or moving) cilia are found in the lungs, respiratory tract and middle ear. ... These cilia have a rhythmic waving or beating motion. They work, for instance, to keep the airways clear of mucus and dirt, allowing us to breathe easily and without irritation.

Answer: to keep airway clear of mucus and dirt allowing us to breathe easy

Explanation:

Answer:The answer is B my child

Explanation:

Answer:

radioisotope dating is another name

Answer:

Radiometric dating

Explanation:

hope that helps

Answer:

Electrons that arent electrons

Explanation:

I teach chem

Answer:

Valence electrons are the electrons found in the highest and main energy level of the atom, being these responsible for the interaction between atoms of different species or between atoms of the same species. You can quickly determine these by looking at a periodic table like this one... Which is where the roman numbers come in and show the valence electrons. (THIS TABLE IS IN SPANISH, I hope you still recognize the symbols.) :))

Answer:

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question

N = 1.505 × 10²³ Na atoms

We have

[tex]n = \frac{1.505 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{1}{4} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

C. Anything That Takes Up Space.

Explanation:

Answer:

True

Explanation:

True. If an animal has attributes to it that help it survive better in an environment, it will survive better than its counterparts who do not have this attribute. More survival = More offspring

Answer:

True.

Explanation:

It's called survival of the fittest. Animals are genetically supposed to be well suited to their environment and if they aren't, they die out.

Answer:

3564 = 3.564 x 10^3

Explanation:

i.e expresing the value in standard form.

Answer:

color shape and size

Explanation:

Answer:

The first one

Explanation:

Answer:

Option C is correct option = 2.85×10⁻² lb/in³

Explanation:

Given data:

Density in g/mL = 0.789

Density in lb/in³ = ?

Solution:

It is given that,

2.54 cm = 1 in

2.205 lb = 1 kg   thus,

1 mL = 1 cm³

0.789 g/cm³ × 1 kg/ 1000 g × 2.205 lb/1 kg × (2.54 cm / 1in)³

2.85×10⁻² lb/in³

The density of liquid ethanol is 0.789 g/mL, which is equivalent to 0.0285 lb/in³.

A student measured the density of liquid ethanol to be 0.789 g/mL and we want to convert it to lb/in³. We will need a series of conversion factors.

A conversion factor is an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another.

We will use the following conversion factors:

0.789 g/mL × (1 kg/1000 g) × (2.205 lb/1 kg) = 1.74 × 10⁻³ lb/mL

We will use the following conversion factors:

1.74 × 10⁻³ lb/mL × (1 mL/1 cm³) × (2.54 cm/1 in)³ = 0.0285 lb/in³

The density of liquid ethanol is 0.789 g/mL, which is equivalent to 0.0285 lb/in³.

Learn more about unit conversion here: https://brainly.com/question/13016491