.c ...energy
Explanation:
Amplitude does not affect wavelength. It also does not affect wave speed. Amplitude is the energy of the wave measured from the rest position to the top of the crest. A wave with more energy has a higher up crest/ higher amplitude.
As the amplitude of a mechanical wave increases, the quantity which increases is: C. energy.
What is a mechanical wave?A mechanical wave can be defined as a type of wave that requires a medium for its propagation and it creates a disturbance in the medium. Thus, a good example of mechanical wave is sound wave, which is typically transported in a perpendicular direction.
What is amplitude?Amplitude refers to the maximum displacement of a wave when measured from its equilibrium position. Also, the amplitude of a mechanical wave has no effect on the following:
WavelengthSpeedFrequencyRead more on wave here: https://brainly.com/question/19250621
calculate the ground pressure of a 90kg gas cylinder the diameter of the cylinder is 1.1 m
Answer:
P = 928.09 Pa
Explanation:
Given that,
Mass of a gas cylinder, m = 90 kg
The diameter of the cylinder, d = 1.1 m
Radius, r = 0.55 m
We need to find the ground pressure. The pressure is equal to force per unit area. So,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]
So, the ground pressure is 928.09 Pa.
Changes in the Moon’s position as it revolves around the Earth results in more or less of the sunlight __________from the Moon being visible when observing the Moon from the Earth. This causes the Moon to appear to change shape from Earth. *
Answer:
reflection of the moon, or just reflection
Explanation:
when the sunlight hits the moon, it refects back to earth making the moon appear to glow
Answer:
reflecting
Explanation:
the sun's light reflects off the moon, making the moon visible
A rock has 750 J of potential energy as it sits on a ledge. If the rock were pushed off the ledge, how much would it have just before it hit the ground?
Answer:
the 750 j will have potential energy is 375
Explanation:
750/2 is 375
The outside diameter of your teacher's rear bicycle tire is 16 inches. How far will he travel if the rear wheel makes 1200 revolutions on the road?
Answer:
241,274.32 inches
Explanation:
How far will he travel if the rear wheel makes 1200 revolutions on the road?
Since the rear wheel makes one revolution in the distance of a circumference of a circle, C with diameter, d = 16 inches
C = πd²/4
So, the distance, travelled in 1200 revolutions is D = 1200 × C = 1200πd²/4
Substituting d = 16 into D, we have
D = 1200πd²/4
D = 1200π(16)²/4
D = 76800π
D = 241,274.32 inches
Car A has twice the mass of Car B; both travel at the same speed. Compared to Car B. Car A has:
o the same the energy
o four times the energy
Otwice the energy
one-half the energy
one-fourth the energy
Answer:
Car A has twice the energy of car B.
Explanation:
The kinetic energy of an object is given by :
[tex]K=\dfrac{1}{2}mv^2[/tex]
Where
m is the mass
v is the speed of the object
Car A has twice the mass of Car B. Both travel at the same speed i.e.
[tex]m_A=2m_B[/tex]
So,
[tex]\dfrac{K_A}{K_B}=\dfrac{(1/2)m_Av^2}{(1/2)m_Bv^2}\\\\=\dfrac{2m_B}{m_B}\\\\\dfrac{K_A}{K_B}=2\\\\K_A=2\times K_B[/tex]
So, the kinetic energy of car A is twice of the kinetic energy of car B.
Answer:
Car A has twice the energy
Explanation:
Which of these would have the highest temperature?
ice
water
water vapor
Answer:
Water vapor
Explanation:
Water Vapor has the highest temperature, due to its being in a gas state, and gases usually have very high temperatures, for example steam when you boil pasta.
Hope this helps you! Have a nice day!
If a book was to fall from the shelf, how fast would it be moving just before hitting the floor?
Answer:
0 becouse it will still before falling
Explanation:
A hydrogen atom has a radius of 2.5 x 10-11 m
Determine the radius of a magnesium atom.
Answer:
[tex]R = 1.5* 10^{-10}m[/tex]
Explanation:
Given
[tex]r = 2.5 * 10^{-11}m[/tex] -- radius of hydrogen atom
See attachment
Required
Determine the radius of magnesium atom (R)
From the attachment, the ratio of a hydrogen atom to a magnesium atom is:
[tex]Ratio = 6mm : 36mm[/tex]
Simplify
[tex]Ratio =1 : 6[/tex]
Represent the radius as ratio:
[tex]Ratio = r : R[/tex]
Substitute [tex]r = 2.5 * 10^{-11}m[/tex]
[tex]Ratio = 2.5 * 10^{-11}m : R[/tex]
Equate both ratios
[tex]2.5 * 10^{-11}m : R = 1 : 6[/tex]
Express as fraction
[tex]\frac{2.5 * 10^{-11}m}{R} = \frac{1}{6}[/tex]
Cross Multiply
[tex]R * 1 = 2.5 * 10^{-11}m * 6[/tex]
[tex]R * 1 = 2.5 * 6* 10^{-11}m[/tex]
[tex]R * 1 = 15* 10^{-11}m[/tex]
[tex]R = 15* 10^{-11}m[/tex]
[tex]R = 1.5*10* 10^{-11}m[/tex]
[tex]R = 1.5* 10^{1-11}m[/tex]
[tex]R = 1.5* 10^{-10}m[/tex]
Hence, the radius of the magnesium atom is: [tex]1.5* 10^{-10}m[/tex]
What is the impulse of a constant force of 50 newtons applied for 0.6 seconds
Answer:
30 kg·[tex]\frac{m}{s}[/tex]
Explanation:
Impulse is equal to the average force multiplied by the elapsed time, or
J=[tex]F_{av}[/tex]Δt
Your average force [tex]F_{av}[/tex] is 50 newtons because it was a constant force. Your elapsed time Δt was 0.6 seconds.
Multiply these values and you get an impulse of 30 kg·[tex]\frac{m}{s}[/tex]
Identify the medium an electromagnetic wave travels the fastest in.
empty space or vaccum the Electro magnetic wave travels the fastest.
An object accelerates at 50 m/s/s with a force of 100 N. What is its mass?
Answer:
Explanation:
A change in an object’s motion—such as Xander speeding up on his scooter—is called acceleration. Acceleration occurs whenever an object is acted upon by an unbalanced force. The greater the net force acting on the object, the greater its acceleration will be, but the mass of the object also affects its acceleration. The smaller its mass is, the greater its acceleration for a given amount of force. Newton’s second law of motion summarizes these relationships. According to this law, the acceleration of an object equals the net force acting on it divided by its mass. This can be represented by the equation:
Acceleration=Netforce-Mass or a=F/m
An impulse of 12.2kg m/s is delivered to an object whose initial momentum is 4.5kgm/s. What is the object's final momentum?
Answer:
Object's final momentum = 16.7 kg-m/s
Explanation:
Given that,
Impulse, J = 12.2 kg-m/s
Initial momentum, [tex]P_i=4.5\ kg-m/s[/tex]
We need to find the object's final momentum. We know that the impulse is equal to the change in momentum. So,
Impulse = change in momentum
[tex]J=P_f-P_i\\\\P_f=J+P_i\\\\P_f=12.2+4.5\\\\P_f=16.7\ kg-m/s[/tex]
So, the object's final momentum is 16.7 kg-m/s.
Given:
Impulse, [tex]J = 12.2 kg-m/s[/tex]Initial momentum, [tex]P_i = 4.5 \ kg-m/s[/tex]We know the relation,
→ [tex]Impulse = Change \ in \ momentum[/tex]
or,
→ [tex]J = P_f-P_i[/tex]
then,
→ [tex]P_f = J+P_i[/tex]
By substituting the values,
[tex]= 12.2+4.5[/tex]
[tex]= 16.7 \ kg-m/s[/tex]
Thus the above answer is right.
Learn more about momentum here:
https://brainly.com/question/18551770
What is the gravitational potential energy of a 250 kg rock on top of a 200 meter cliff?
Answer:
500000 approx........
...
Given that the frequency of an Em wave is 4THz, what is its wavelength? a) 75,000um b) 75,000nm c) 75,000pm d) 75,000A
Answer:
λ = 75 µm, correct is A
Explanation:
In waves, speed is related to wavelength and frequency
c = λ f
λ = c / f
in this exercise indicate the frequency of rationality
f = 4 THz = 4 10¹² Hz
let's calculate
λ = 3 10⁸/4 10¹²
λ = 7.5 10⁻⁵ m = 75 10⁻⁶ m
λ = 75 µm
A diode, which allows current to flow in one direction only, consists of two types of semiconductors joined together.
True or false
Answer:
True.
Explanation:
A diode, which allows current to flow in one direction only, consists of two types of semiconductors joined together.
A semiconductor can be defined as a crystalline solid substance that has its conductivity lying between that of a metal and an insulator, due to the effects of temperature or an addition of an impurity. Semiconductors are classified into two main categories;
1. Extrinsic semiconductor.
2. Intrinsic semiconductor.
An intrinsic semiconductor is a crystalline solid substance that is in its purest form and having no impurities added to it. Examples of intrinsic semiconductor are Germanium and Silicon.
In an intrinsic semiconductor, the number of free electrons is equal to the number of holes. Also, in an intrinsic semiconductor the number of holes and free electrons is directly proportional to the temperature; as the temperature increases, the number of holes and free electrons increases and vice-versa.
In an intrinsic semiconductor, each free electrons (valence electrons) produces a covalent bond.
Which statement describes the difference between ionic bonds and Van der
Waals forces?
A. Ionic bonds involve the sharing of electrons between atoms, while
Van der Waals forces involve the attraction of nonpolar molecules.
B. Ionic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the sharing of electrons between
atoms.
C. lonic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the attraction of nonpolar molecules.
D. Ionic bonds involve the attraction of nonpolar molecules, while
Van der Waals forces involve the transfer of electrons between
ions.
Answer:
C. lonic bonds involve the transfer of electrons between ions, while
Van der Waals forces involve the attraction of nonpolar molecules.
Explanation:
Just did it
Two resistors, A and B, are connected in series to a 6.0 V battery. A voltmeter connected across resistor A measures a potential difference of 4.0 V. When the two resistors are connected in parallel across the 6.0 V battery, the current in B is found to be 2.0 A. Find the resistances of A and B.
Answer:
Resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω
Explanation:
When the two resistors are in series, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B.
Given that V₁ + V₂ = 6.0 V and V₁ = 4.0 V,
V₂ = 6.0 V - V₁ = 6.0 V - 4.0 V = 2.0 V
Also, let the current in series be I.
So, V₁ = IR₁ and V₂ = IR₂
I = V₁/R₁ and I = V₂/R₂
equating both expressions, we have
V₁/R₁ = V₂/R₂
4.0 V/R₁ = 2.0 V/R₂
dividing through by 2.0 V, we have
2/R₁ = 1/R₂
taking the reciprocal, we have
R₂ = R₁/2
R₁ = 2R₂
From the parallel connection, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B. Since it is parallel, V₁ = V₂ = V = 6.0 V
Also, V₂ = I₂R₂ where I₂ = current in resistor B = 2.0 A and R₂ = resistance of resistor B
So, R₂ = V₂/I₂
= 6.0 V/2.0 A
= 3.0 Ω
R₁ = 2R₂
= 2(3.0 Ω)
= 6.0 Ω
So, resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω
The resistance of A is 6Ω while for B is 3Ω.
Definition of potential differencePotential difference is the amount of work done in moving a unit charge from one point to another.
When the two resistors are connected in parallel across the 6.0 V battery, the current in B is found to be 2.0 A, hence:
2 * Rb = 6 V
Rb = 3Ω
For the series connection:
I * 3 = (6 - 4)
I = 2/3 A
Hence:
(2/3) * Ra = 4
Ra = 6Ω
The resistance of A is 6Ω while for B is 3Ω.
Find out more on potential difference at: https://brainly.com/question/14306881
5.Noise pollution is harmful forRequired to answer. Single choice.Immersive Reader
(1 Point)
Human
Cat
Bird
All
Answer:
D: All
Explanation:
In cats, noise pollution causes what is known as acoustic stress in them.
In birds, noise pollution delays their nesting because it makes their songs which they use to probe to be at a low frequency.
Noise pollution affects humans because it can lead to loss of hearing, sleep disturbance, stress, high blood pressure e.t.c
Therefore, it affects Cats, birds and humans.
So option D is correct.
use the diagram to identify the four regions of the earthworm.
dorsal side:
ventral side:
anterior end:
posterior end:
here are some pictures
Answer:
Dorsal side:B
Ventral side:D
Anterior end:A
Posterior end:C
Explanation:
The four regions of the earthworm are, A is the anterior end,B is the dorsal side, C is the posterior end, and D is the ventral side.
What are earthworms?Earthworms are common soil dwellers who are both safe and useful. Earthworms help plants flourish by collapsing dead and decaying organic debris into rich humus soil.
They also aerate the soil and enhance flow by digging small canals and holes.
The four regions of the earthworm are;
A is the Anterior end
B is the Dorsal side
C is the Posterior end
D is the Ventral side
Hence all the regions are clearly defined with the help of digrame.
To learn more about the earthworms refer to the link;
https://brainly.com/question/20992190
do dendrites take in information while the axon takes information away from the cell body
Answer:
Yes
Explanation:
Dendrites bring electrical signals to the cell body and axons take information away from the cell body.
A train travels 100 km east and then 75 km west. What is the magnitude of
its displacement?
Answer:
displacement = 100 - 75 = 25 km east
How much energy is transferred electrically by a 2000 W cooker in half an hour?
Responder:
E = 1440 kJ
Explicación:
Se da que,
La potencia de un horno de cocción es de 800 W
El voltaje al que se opera es de 230 V
Tiempo, t = 30 minutos = 1800 segundos
Necesitamos encontrar la energía eléctrica utilizada por el horno de cocción. El producto de la potencia y el tiempo es igual a la energía consumida. Entonces,
All forces acting upon a body are equal in magnitude
and opposite in direction. The object is initially
motionless and will remain motionless.
What is this condition called?
Answer:
Explanation:
It's called static equilibrium. The object is motionless and every force equals/cancels each other out
A fault is formed by the movement of a ___ plate boundary
A.convergent
B.traditional
C.divergent
D.transform
3. A fighter jet covers a distance of 895m while accelerating from 22m/s to 35m/s. How long (in
seconds) did this take to happen?
Answer:
31.404 seconds
Explanation:
To answer this equation, SUVAT is your best option utilizing and rearranging the known values to solve for the unknown.
here we have the values for
s=895
u=22
v=35
t= the unknown value
in this instant the equation s=0.5 x (u+v)t is the best equation to use
so we sub in the known values
895=0.5 x (22+35)t
rearrange to solve for t
895=28.5t
895/28.5=t
t=31.404 seconds (rounded to 3 decimal places)
how high is the pole from which the lamp fell freely if it hits the ground at a speed of 15 m/s
Answer & Explanation:
The acceleration due to gravity is about 10 m/s^2.
That means a the speed of a falling object will increase by 10 m/s every second that it falls.
We know that the lamp hits the ground at 15 m/s.
That means the lamp has been falling for
[tex]\frac{15 m/s}{10 m/s^{2} } = 1.5 s[/tex]
Now we use the formula [tex]h = \frac{1}{2} gt^{2}[/tex] to calculate the height, where
h is the height
g is the acceleration due to gravity and
t is the time taken to fall a height of h.
h = 1/2 x 10 x 1.5^2 = 11.25 m
Big sound is heard in bathroom than in a living room
Answer
That doesn't make any sense.
Explanation:
How efficient is a pulley system if it enables you to lift a 700.0 Newton engine (Fr) 0.550 meters (dr) if you exerted 35.7 Newtons (Fe) of force while pulling 11.43 meters (de) of rope?
Answer:
96.3%
Explanation:
Efficiency = Work input/Work output * 100%
Work done = Force * distance\
Work done by the engine is the work output = 700 * 0.55
Work output = 423.5Nm
Work done by you is the work input = 35.7*11.43
Work input = 408.051Nm
Efficiency = 408.051/423.5 * 100
Efficiency = 0.963 * 100
Efficiency = 96.3%
Hence the efficiency of the pulley system is 96.3%
What are forces? (Check all that apply)
-Push or pull
-An action that has the ability to change potion
-Actions that can increase or decrease the speed of a moving object
-Actions that can change the direction in which an object is moving
-Gravity
-Electromagnetic
-Strong Nuclear Force
-Weak Force
-Matter
Answer:
Push or Pull
Gravity
Strong Nuclear Force
Weak Force
Explanation:
The law of conservation of momentum states that, if left alone, what happens to the total momentum of two interacting objects that make up a system? it increases over time it remains the same it eventually becomes zero changes based on how they collide
Answer:
it remains the same
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
Momentum = mass * velocity
The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.
Hence, the law of conservation of momentum states that, if left alone, the total momentum of two interacting objects that make up a system remains the same.
This ultimately implies that, if two interacting objects exert forces only on each other, their total momentum will remain the same i.e it is conserved.
Answer:
it remaines the same :)
Explanation: