Answer:
Its D
Explanation:
They are at a 90° angle to each other.
Do good on your tests :]
The answer is D) They are at a 90° angle to each other.
What is an electromagnetic wave?One of the waves which are propagated with the aid of simultaneous periodic versions of electrical and magnetic subject depth and consists of radio waves, infrared, seen mild, ultraviolet, X-rays, and gamma rays.
Radio waves, microwaves, seen light, and x-rays are all examples of electromagnetic waves that range very differently in wavelength. (a) Longer wavelength; (b) shorter wavelength. Electromagnetic waves are produced by means of the motion of electrically charged debris.
Learn more about electromagnetic waves here: https://brainly.com/question/25847009
#SPJ2
50 points Two waves combine with constructive interference. What must be true of the
combined wave that forms?
A. It has a lower frequency than that of the original waves.
B. It has a higher amplitude than that of the original waves.
C. It has a higher frequency than that of the original waves.
D. It has a lower amplitude than that of the original waves.
Answer:
it has a higher amplitude than that of the original waves
Explanation:
trust me its right
The two waves combined with constructive interference have a higher amplitude than the original wave.
Which wave has the highest amplitude?High energy waves are characterized by high amplitude. Low energy waves are characterized by their small amplitude. As explained in Lesson 2, wave amplitude is the maximum amount of particle movement on a medium from a resting position.
What are superposition and interference?Superposition is a combination of two waves in the same place. Constructive interference occurs when two identical waves interfere in phase. Destructive interference occurs when two identical waves are exactly out of phase and overlap.
Learn more about higher amplitude waves at
https://brainly.com/question/19036728
#SPJ2
a 90 kilogram dog runs across the dog park at a speed of 6.5 meters per second. what is the magnitude and direction of the average force required to stop the dog in .85 seconds?
Answer:
am not sure about the answer
Explanation:
you need to find out the amount of force it's going in for example 10n or 100n then you need to times it the distance then devide by the time
A 4-stroke heat engine in an automobile is
used to
A convert mechanical energy into heat
energy.
B convert heat energy into mechanical
energy.
с convert steam into solar energy.
D convert chemical energy into electrical
energy.
Answer:
b
Explanation:
convert heat energy into mechanical
how can you rewrite the force formula (f=ma) to solve the acceleration?
The force formula can be rewritten to solve the acceleration as:
acceleration = force/mass.
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
From Newton's 2nd law of motion, we can write that:
Force = mass × acceleration
⇒ acceleration = force/mass.
Hence, the force formula can be rewritten to solve the acceleration as:
acceleration = force/mass.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2
A 200-N force acts on a 10-kg object. The acceleration of the object is
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
You are inside the Great Hall, 15 m from the north wall with the doors to the RMC, and centered between two open doors that are 3 m apart. Someone is blairing a 200 Hz tone outside the Great Hall so that it enters the doors as a plane wave. You hear a maximum intensity in your current position. As you walk along the direction of the wall with the doors (but maintain a distance 15 m from the wall), how far will you walk (in m) to hear a minimum in the sound intensity
Answer:
Δr = 0.425 m
Explanation:
This is a sound interference exercise, the expression for destructive interference is
Δr = (2n + 1) λ / 2
in this case the movement is in the same direction as the sound, therefore the movement is one-dimensional
let's use the relationship between the speed of sound and its frequency and wavelength
v = λ f
λ = v / f
the first minium occurs for n = 0
Δr = λ / 2
Δr = v / 2f
Δr = [tex]\frac{340}{2 \ 400}[/tex]
Δr = 0.425 m
this is the distance from the current position that we assume in the center of the room
Hearing rattles from a snake, you make two rapid displacements of magnitude 1.8 m and 2.4m. Draw sketches, roughly to scale, to show how your two displacements might add to give the following resultant of magnitudes.
a. 4.2 m
b. 0.6 m
c. 3.2 m
Answer:
The answer is a 4.2m
Explanation:
Given data
Please see attached the rough drawing for your reference.
From the drawing, you ran 18m west and 2.4m south
The displacement is
= 1.8+2.4
=4.2m
Which of the following is NOT a characteristic of noble gases?
unreactive
odorless
solid at room temperature
colorless
There is a very long straw of charge that is uniformly charged in electro static equilibrium. It has a charge per unit length of 4.0E-9 C/m (4.0 nC/m) and a radius of 0.5 m. What is the strength of the electric field a distance of 10.0 m from its center outside the straw
Answer:
2880 N/c
Explanation:
Given that:
Charge per unit length ; λ = 4 * 10^-9
radius, r = 10
Radius, R = 0.5m
Using the relation :
2λr / 4πE0R²
Columb's constant, k = 1/4πE0 =. 9* 10^9Nm²/C²
Hence, we have :
2λrk/ R²
(2 * 4 * 10^-9 * 10 * 9 * 10^9) / 0.5^2
(720 ÷ 0.25)
= 2880 N/c
Two loudspeakers are about 10 mm apart in the front of a large classroom. If either speaker plays a pure tone at a single frequency of 400 HzHz, the loudness seems pretty even as you wander around the room, and gradually decreases in volume as you move farther from the speaker. If both speakers then play the same tone together, what do you hear as you wander around the room
Answer:
I hear points of low volume sound and points of high volume of sound.
Explanation:
This is because, since the two sources of sound have the same frequency and are separated by a distance, d = 10 mm, there would be successive points of constructive and destructive interference.
Since their frequencies are similar, we should have beats of high and low frequency.
So, at points of low frequency, the amplitude of the wave is smallest and there is destructive interference. The frequency at this point is the difference between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, f - f' = 400 Hz - 400 Hz = 0 Hz. So, the volume of the sound is low(zero) at these points.
Also, at points of high frequency, the amplitude of the wave is highest and there is constructive interference. The frequency at this point is the sum between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, (f + f') = 400 Hz + 400 Hz = 800 Hz. So, the volume of the sound is high at these points.
So, as you wander around the room, I should hear points of high and low sound across the room.
An 80 N rightward force is applied to a 10 kg object to accelerate it to the right.
The object encounters a friction force of 50 N.
net force = 30 N
mass = 8.16 kg
acceleration = 3.68 m/s²
Further explanationGiven
80 N force applied
mass of object = 10 kg
Friction force = 50 N
Required
Net force
mass
acceleration
Solution
net forceNet force = force applied(to the right) - friction force(to the left)
Net force = 80 - 50 = 30 N
massGravitational force(downward) : F = mg
m = F : g
m = 80 : 9.8
m = 8.16 kg
accelerationa = F net / m
a = 30 / 8.16
a = 3.68 m/s²
The nearest neighbor interaction force is of magnitude 481 nanoNewtons, e.g., the magnitude of the force of the leftmost electron on the proton, or the magnitude of the force of any of the three on its nearest neighbor electron. Calculate the size of the net force on the leftmost proton.
Answer:
F = 120.25 10⁻⁹ N
Explanation:
In this exercise, the force between the closest neighbors is indicated by f = 481 10⁻⁹ N, in general between the one-dimensional solid the distances remain the same, if the distance between the first neighbor is d, the distance between the second neighbors is 2d.
For most solids the attractive forces are electrical, therefore force is proportional to the electrical charges and the inverse of the distance squared,
F = [tex]k \frac{q_1 q_2}{r^2}[/tex]
if we call fo the force for the first neighbors
F₀ = k \frac{q_1 q_2}{d^2}
the force for the second neighbors r= 2d
F = k \frac{q_1 q_2}{(2d)^2}
F = F₀ / 4
let's calculate
F = 481 10⁻⁹ / 4
F = 120.25 10⁻⁹ N
Heart Disease is the number one cause of preventable death in the United States
A True
B False
Heart disease is the leading cause of death for both men and women. This is the case in the U.S. and worldwide. More than half of all people who die due to heart disease are men.
TRUE
which particles do not affect the stability of the atom
Electrons are the particle pr4esent inside the atom that does not affect the stability of the atom,
What is radioactivity?The ability of some unstable atoms to emit nuclear radiation spontaneously, typically in the form of alpha or beta particles frequently accompanied by gamma rays, is known as radioactivity.
An overabundance of neutrons or protons can make the nucleus of an atom unstable.
A radioactivity atom will try to become stable by extruding other particles, such as protons or neutrons, or by releasing energy in various ways.
Thus, Electrons are the particle present inside the atom that does not affect the stability of the atom,
To learn more about radioactivity here, refer to the link;
https://brainly.com/question/13950350
#SPJ2
Explain two reasons why astronomers are continually building larger and larger telescopes. Explain two reasons why astronomers are continually building larger and larger telescopes. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce more scattering of light due to diffraction, which contributes to better angular resolution. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce more scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce less scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce less scattering of light due to diffraction, which contributes to better angular resolution.
Answer:
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* arger mirrors decreases the angle of dispersion giving a better resolution of the bodies
Explanation:
Refracting telescopes get bigger every day for two main reasons.
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* the diffraction process for circular apertures is given by
θ = 1.22 λ / D
where d is the diameter of the mirror, therefore having larger mirrors decreases the angle of dispersion giving a better resolution of the bodies
how is friction involved in the movement of space
Answer:
Friction can stop or slow down the motion of an object.
Explanation:
The slowing force of friction always acts in the direction opposite to the force causing the motion.
6 An object can never have
A. a positive speed.
B. a negative speed.
C. a positive velocity.
D. a negative velocity.
Answer:
B
Explanation:
Speed is the magnitude of the velocity vector, so it can never be negative.
An object can never have a negative velocity. Therefore, option (D) is correct.
What is velocity?Velocity is a vector quantity that describes an object's speed and direction of motion. If an object is moving in a positive direction, it has a positive velocity. If it is moving in the opposite direction, it has a negative velocity.
However, an object can never have a negative speed. Speed is a scalar quantity that describes an object's rate of motion, and it is always positive. The speed of an object can be positive or negative, depending on the direction of its velocity, but the magnitude of its speed is always positive.
Learn more about velocity, here:
https://brainly.com/question/18084516
#SPJ6
Answer this and you get 100 points
You better answer it quick though
Answer what? Apologies, but I don't see anything. (。>︿<)
What quantity measures the amount of space an object occupies?
A. Volume B.Temperature C. Mass D. Density
Answer:
mas
Explanation:
mass is the amount of space something occupies.
a sensor light installed on the edge of a home can detect motion for a distance of 50 feet in front and with a range of motion of 200 degrees. what is the arc length of the area covered
Answer:
4363.3231 feets²
Explanation:
Given that :
Distance, r = 50 ft
θ = 200°
The arc length of area covered :
Arc length = θ/360° * πr²
Arc length = (200/360) * 50 ft ^2 * π
Arc length = 0.5555555 * 2500 * π
Arc length = 4363.3231 feets²
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer:
10 J.
Explanation:
Given that,
Net force acting on the rake, F = 2 N
Distance moved by the rake, d = 5 m
We need to find the kinetic energy gained by the rake. We know that,
Kinetic energy = work done
So,
K = F×d
K = 2 N × 5 m
K = 10 J
So, 10 J of kinetic energy is gained by the rake.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer: 10 J
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would....
A Increase
B Decrease
C Stay the Same
D Vary with day and night
Answer:The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would..
Explanation: It would decrease.
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would decrease because the acceleration due by gravity on the moon is less than the acceleration due to gravity on the earth, therefore the correct answer is option C.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another.
In comparison to the Earth, the Moon is less massive. Your weight would drop if you traveled to the moon because the acceleration caused by gravity there is lower than that caused by gravity here on Earth.
As a result of the less gravity on the moon, the weight would decrease.
Thus, the correct answer is option C.
To learn more about gravity from here, refer to the link;
brainly.com/question/4014727
#SPJ2
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
HELP ASAP PLS
A balloon with a positive charge will stick to a wall that has a negative charge.
What force causes this?
A. Gravity
B. Electric force
C. Magnetic force
D. Air gesistance
Rank the four fundamental forces from strongest to weakest. Use 1 to indicate the strongest force and 4 to indicate the weakest force. The gravitational force: The electromagnetic force: The strong nuclear force: The weak nuclear force:
Answer:
4
2
1
3
Explanation:
Be safe, lovelies <3
20 points!!!! A 2,00ON steel rod that is 5 meters long is placed in a corner between the floor and a wall, and balanced at an angle using a cord attached to the wall The rod is balanced such that its top end is 2.38 meters away from the wall, The cord is 40 cm long, and it is attached to the wall at a height of 75 cm above the floor. The diagram to the right shows the situation If the lower end of the rod does not slip from the corner, what is the tension in the cord?
Answer:
WE NEED TO ADD ALL 40+2.38 +75+5
Explanation:
PLSE GIVE SOME POINTS DUDE
What is the period, in seconds, that corresponds to each of
the following frequencies: (a) 10 Hz, (b) 0.2 Hz, (c) 60 Hz?
Answer:
0.1s,5s,0.017s
Explanation:
T=1÷frequency
Answer:
a =
✔ 6
The period is
✔ 2 seconds.
b =
✔ pi
Explanation:
Graph the function using the graphing calculator. Find the least positive value of t at which the pendulum is in the center.
t =
✔0.5 sec
To the nearest thousandth, find the position of the pendulum when t = 4.25 sec.
d =
✔ 4.243 in.
If an ocean wave has a wavelength of 2 m and a frequency of 1 wave/s, then its speed is m/s Enter the answer Check it CRATCHPAD Improve this questic 트
Answer:
2m/s
Explanation:
v=f×wavelength
v=2×1
=2m/s
a. Use the graph and the element made in question 2 to determine the mass of the star.