Answer:
the distance is 6.46 cm.
Explanation:
Given
current in the wire, I = 4.2 A
magnitude of the magnetic field, B = 1.3 x 10⁻⁵ T
The distance from the wire is determined by using Biot-Savart Law;
[tex]B = \frac{\mu_o I}{2\pi r} \\\\r = \frac{\mu_o I}{2\pi B}[/tex]
Where;
r is the distance from the wire where the magnetic field is experienced
[tex]r = \frac{\mu_o I}{2\pi B}\\\\r = \frac{4\pi \times 10^{-7} \times 4.2 }{2\pi \times 1.3 \times 10^{-5}}\\\\r = 0.0646 \ m\\\\r = 6.46 \ cm[/tex]
Therefore, the distance is 6.46 cm.
Which of the following correctly explains the difference between sound and light?
A.Sound is a longitudinal wave that does not require a medium through which to travel, and light is a transverse wave that does require a medium.
B.Sound is a longitudinal wave that requires a medium through which to travel, and light is a transverse wave that does not require a medium.
C.Sound is a transverse wave that requires a medium through which to travel, and light is a longitudinal wave that does not require a medium.
D.Sound is a transverse wave that does not require a medium through which to travel, and light is a longitudinal wave that does require a medium.
Answer: i think the answer is C
Explanation:
g A thin-walled hollow cylinder and a solid cylinder, both have same mass 2.0 kg and radius 20 cm, start rolling down from rest at the top of an incline plane. The height of top of the incline plane is 1.2 m. Find translational speed of each cylinder upon reaching the bottom and determine which cylinder has the greatest translational speed upon reaching the bottom. Moment of inertia of hollow cylinder about its axis passing through the center is mr2 and for solid cylinder mr2/2
Answer:
a. i. 3.43 m/s ii. 2.8 m/s
b. The thin-walled cylinder
Explanation:
a. Find translational speed of each cylinder upon reaching the bottom
The potential energy change of each mass = total kinetic energy gain = translational kinetic energy + rotational kinetic energy
So, mgh = 1/2mv² + 1/2Iω² where m = mass of object = 2.0 kg, g =acceleration due to gravity = 9.8 m/s², h = height of incline = 1.2 m, v = translational velocity of object, I = moment of inertia of object and ω = angular speed = v/r where r = radius of object.
i. translational speed of thin-walled cylinder upon reaching the bottom
So, For the thin-walled cylinder, I = mr², we find its translational velocity, v
So, mgh = 1/2mv² + 1/2Iω²
mgh = 1/2mv² + 1/2(mr²)(v/r)²
mgh = 1/2mv² + 1/2mv²
mgh = mv²
v² = gh
v = √gh
v = √(9.8 m/s² × 1.2 m)
v = √(11.76 m²/s²)
v = 3.43 m/s
ii. translational speed of solid cylinder upon reaching the bottom
So, For the solid cylinder, I = mr²/2, we find its translational velocity, v'
So, mgh = 1/2mv'² + 1/2Iω²
mgh = 1/2mv² + 1/2(mr²/2)(v'/r)²
mgh = 1/2mv'² + mv'²
mgh = 3mv'²/2
v'² = 2gh/3
v' = √(2gh/3)
v' = √(2 × 9.8 m/s² × 1.2 m/3)
v' = √(23.52 m²/s²/3)
v' = √(7.84 m²/s²)
v' = 2.8 m/s
b. Determine which cylinder has the greatest translational speed upon reaching the bottom.
Since v = 3.43 m/s > v'= 2.8 m/s,
the thin-walled cylinder has the greatest translational speed upon reaching the bottom.
Review please help.
Answer:
1 and 3
Explanation:
because they are going up from 0
An 80.0-kg skydiver jumps out of a balloon at an altitude of 1,000 m and opens his parachute at an altitude of 200 m. A. Assuming the total friction (resistive) force on the skydiver is constant at 50.0 N with the parachute closed and constant at 3,600 N with the parachute open, find the speed of the skydiver when he lands on the ground. B. At what height should the parachute be opened so that the final speed of the skydiver when he hits the ground is 5.00 m/s
Answer:
[tex]24.9\ \text{m/s}[/tex]
[tex]206.7\ \text{m}[/tex]
Explanation:
m = Mass of skydiver = 80 kg
[tex]x_1[/tex] = Height for which the parachute is closed = 1000-200 = 800 m
[tex]x_2[/tex] = Height for which the parachute is open = 200 m
[tex]f_1[/tex] = Resistive force when parachute is closed = 50 N
[tex]f_2[/tex] = Resistive force when parachute is open = 3600 N
v = Velocity of skydiver on the ground
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
h = Height from which the skydiver jumps = 1000 m
The energy balance of the system will be
[tex]mgh-f_1x_1-f_2x_2=\dfrac{1}{2}mv^2\\\Rightarrow 80\times 9.81\times 1000-50\times 800-3600\times 200=\dfrac{1}{2}\times 80\times v^2\\\Rightarrow v=\sqrt{\dfrac{2(80\times 9.81\times 1000-50\times 800-3600\times 200)}{80}}\\\Rightarrow v=24.9\ \text{m/s}[/tex]
The velocity fo the skydiver when he lands will be [tex]24.9\ \text{m/s}[/tex]
x = Height where the person opens the parachute
v = 5 m/s
[tex]mgh-f_1x_1-f_2x_2=\dfrac{1}{2}mv^2\\\Rightarrow 80\times 9.81\times 1000-50\times (1000-x)-3600\times x=\dfrac{1}{2}\times 80\times 5^2\\\Rightarrow 80\times 9.81\times 1000-50000+50x-3600x=\dfrac{1}{2}\times 80\times 5^2\\\Rightarrow x=\dfrac{80\times 9.81\times 1000-50000-\dfrac{1}{2}\times 80\times 5^2}{3550}\\\Rightarrow x=206.7\ \text{m}[/tex]
The height at which the parachute is to be opened is [tex]206.7\ \text{m}[/tex]
A dog runs 51 m west to fetch a ball and brings it back only 27 m before stopping.
The total displacement of the dog is:
The data table for the decomposition reaction of hydrogen peroxide H2 O2 shows how the reaction rate changes over time which statement describes the conclusion you can sharpen the table
The data table for the decomposition reaction of hydrogen peroxide H₂ O₂ shows down over time as the reactant rate get used up.
What is rate, reaction and rate of reaction?
Rate- The rate of a particular chemical reaction is calculated by dividing the rate of change in a reactant's or product's concentration by the coefficient from the given balanced equation.
Reactions- They are defined as the change of a chemical substance into an innovative substance through the formation and breaking of bonds among distinct atoms.
Rate of reaction- It is defined as the ratio of the increase in product concentration per unit time to the decrease in reactant concentration per unit time. The rate of reaction varies greatly.
It can be seen that with the concentration, the rate of decomposition is also decreased. Generally, it is found that as per hour concentration and rate of decomposition decreases as well.
Therefore, (A) option is the correct answer.
To learn more about rate,refer here :
https://brainly.com/question/12904152
#SPJ2
Two identical springs of equilibrium length L and spring stiffness kare attached to opposite sides of a block of mass Mto two parallel walls a distance Dfrom each other, where D< 2L. The block moves horizontally along a rail with no friction. At what positions along the rail will the block be stable
Answer:
Hydraulic fracturing
Explanation:
Why is Rome warmer than New York in January
Answer:
The basic answer is sea flows. On the off chance that the air making a trip to New York moves via land, it will be cooler than the air and flows that reach, for instance, San Francisco. Along these lines, Rome is hotter than New York because of flows, topography and air development designs.
Explanation:
Brainliest?
What happens to warm air when it cools?
A
It sinks back down to Earth.
B
It is absorbed into clouds.
с
It remains in Earth's upper atmosphere.
D
It breaks apart and disappears.
Answer:
b I'm pretty sure sorry if I'm wrong
Answer:
I think the answer is B
Explanation:
The warm air turns cold and then it goes back to clouds
Look at the diagram showing the different wavelengths in sunlight.
A diagram showing the human eye and visible light. Visible light is broken down by color with wavelength in nanometers. Red is 700, orange is 600, yellow is 580, green is 550, blue is 475, indigo is 450, violet is 400.
Which has a wavelength of 350 nanometers?
red light
violet light
infrared light
ultraviolet light
Answer:
ultraviolet light
plz mark me as brainliest.
Answer:
Ultra violet
Explanation:
A spiral staircase winds up to the top of a tower in an old castle. To measure the height of the tower, a rope is attached to the top of the tower and hung down the center of the staircase. However, nothing is available with which to measure the length of the rope. Therefore, at the bottom of the rope a small object is attached so as to form a simple pendulum that just clears the floor. The period of the pendulum is measured to be 6.82 s. What is the
Answer:
The answer is "[tex]11.55780\ m[/tex]"
Explanation:
Using formula:
[tex]= 2 \pi f= \frac{2\pi}{T} =\sqrt{\frac{g}{L}}[/tex]
L = length of pendulum.
[tex]= T =2 \pi \sqrt{\frac{L}{g}}[/tex]
Calculate the value for L:
[tex]L= g (\frac{T}{2 \pi})^2 \\\\[/tex]
[tex]= (9.80 \ \frac{m}{s^2}) (\frac{6.82 \ s}{2 \pi})^2\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124 \ s^2}{4 \times \pi^2})\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124\ s^2}{4 \times 9.8596 })\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124 \ s^2}{ 39.4384 })\\\\= \frac{455.82152}{39.4384} \ m\\\\=11.55780\ m[/tex]
The height of the tower = 11.55780 m
A wooden cylinder (in the form of a thin disk) of uniform density and a steel hoop are set side by side, released from rest at the same moment, and roll down an inclined plane towards a wall at the bottom. The cylinder has a larger radius than the hoop, but the hoop weighs more than the cylinder.
Required:
Who reaches the bottom first and why?
Answer:
a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
Explanation:
a. Who reaches the bottom first
The kinetic energy of the objects is given by
K = 1/2mv² + 1/2Iω² where m = mass of object, v = velocity of object, I = moment of inertia and ω = angular velocity = v/r where r = radius of object
For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder
So, its kinetic energy, K = 1/2mv² + 1/2(mr²/2)(v/r)²
K = 1/2mv² + 1/4mv²
K = 3mv²/4
For the steel hoop, I' = mr'² where m' = mass of steel hoop and r' = radius of steel hoop and v' = velocity of steel hoop
So, its kinetic energy, K' = 1/2m'v'² + 1/2(m'r'²)(v'/r')²
K' = 1/2m'v'² + 1/2m'v'²
K' = m'v'²
Since both kinetic energies are the same, since the drop from the same height,
K = K'
3mv²/4 = m'v'²
v²/v'² = 4m/3m'
v²/v'² = 4/3(m/m')
v/v' = √[4/3(m/m')]
Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.
Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.
b. Why
Since the kinetic energy, K = translational + rotational
We find the translational kinetic energy of each object.
For the wooden cylinder,
K = K₀ + 1/2Iω² where K₀ = translational kinetic energy of wooden cylinder
K - 1/2Iω² = K₀
3/4mv² - 1/2(mr²/2)(v/r)² = K₀
3/4mv² - 1/4mv² = K₀
K₀ = 1/2mv²
For the steel hoop,
K' = K₁ + 1/2I'ω'² where K₁ = translational kinetic energy of steel hoop
K' - 1/2I'ω'² = K₁
m'v'² - 1/2(m'r'²)(v'/r')² = K₁
m'v'² - 1/2m'v'² = K₁
K₁ = 1/2m'v'²
So, K₀/K₁ = 1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².
Since (m/m') < 1 ⇒ (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁ < 1.33 ⇒ K₀ > K₁
So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.
So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
What is Kinetic energy?
The energy of the body due to its movement in a particular direction under the influence of a force like a free-falling body due to gravitaional force is called Kinetic energy.
The kinetic energy of the objects is given by
[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}Iw^2[/tex]
where
m = mass of object,
v = velocity of object,
I = moment of inertia and
ω = angular velocity = v/r where r = radius of object
For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder
So, its kinetic energy,
[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}(\dfrac{mr^2}{2})\dfrac{v}{r}^2[/tex]
[tex]K = \dfrac{3mv^2}{4}[/tex]
For the steel hoop,
I' = mr'²
where
m' = mass of steel hoop and
r' = radius of steel hoop and
v' = velocity of steel hoop
So, its kinetic energy,
[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}(m'r'^2)\dfrac{v'}{r'}^2[/tex]
[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}m'v'^2[/tex]
K' = m'v'²
Since both kinetic energies are the same, since the drop from the same height,
K = K'
[tex]\dfrac{3mv^2}{4 }= m'v'^2[/tex]
[tex]\dfrac{v^2}{v'^2} =\dfrac{ 4m}{3m'}[/tex]
[tex]\dfrac{v^2}{v'^2} = \dfrac{4}{3}(\dfrac{m}{m'})[/tex]
[tex]\dfrac{v}{v'} = \sqrt{[\dfrac{4}{3}(\dfrac{m}{m'})][/tex]
Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.
Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.
(b) Since the kinetic energy, K = translational + rotational
We find the translational kinetic energy of each object.
For the wooden cylinder,
[tex]K = K_o + \dfrac{1}{2}Iw^2[/tex]
where
K₀ = translational kinetic energy of wooden cylinder
[tex]K - \dfrac{1}{2}Iw^2 = K_o[/tex]
[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{2}(\dfrac{mr^2}{2})(\dfrac{v}{r})^2 = K_a[/tex]
[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{4}mv^2 = K_o[/tex]
[tex]K_o = \dfrac{1}{2}mv^2[/tex]
For the steel hoop,
[tex]K' = K_1 + \dfrac{1}{2}I'w'^2[/tex]
where
K₁ = translational kinetic energy of steel hoop
[tex]K' - \dfrac{1}{2}I'w'^2 = K_1[/tex]
[tex]m'v'^2 - \dfrac{1}{2}(m'r'^2)(\dfrac{v'}{r'})^2 = K_1[/tex]
[tex]m'v'^2 - \dfrac{1}{2}m'v'^2 = K_1[/tex]
[tex]K_1= \dfrac{1}{2}m'v'^2[/tex]
So, K₀/K₁ = 1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².
Since (m/m') < 1 ⇒ (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁ < 1.33 ⇒ K₀ > K₁
So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.
So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
To know more about Kinetic energy follow
https://brainly.com/question/25959744
Explain why it is not advisable to be in a garage when the car engine is being
heated.
Answer:
You can breathe in too much carbon monoxide, which will eliminate the flow of oxygen to your bloodstream and can kill you.
Explanation:
In a double-slit experiment, the slits are illuminated by a monochromatic, coherent light source having a wavelength of 527 nm. An interference pattern is observed on the screen. The distance between the screen and the double-slit is 1.54 m and the distance between the two slits is 0.102 mm. A light wave propogates from each slit to the screen. What is the path length difference between the distance traveled by the waves for the fifth-order maximum (bright fringe) on the screen
Answer:
Λ = 5.14 10⁻⁴ m
Explanation:
This is a double slit experiment, which for the case of constructive interference
d sin θ = m λ
let's use trigonometry
tan θ = y / L
as the angles are very small
tan θ = [tex]\frac{sin \theta}{cos \theta}[/tex] = sin θ
sin θ = y / L
we substitute
d y / L = m λ
y = m λ L / d
we calculate for the interference of order m = 5
y = 5 527 10⁻⁹ 1.54/0.102 10⁻³
y = 3.978 10⁻² m
Now we can find the difference in length between the two rays, that of the central maximum and this
let's use the Pythagorean theorem
L’= [tex]\sqrt{L^2 +y^2}[/tex]
L ’= [tex]\sqrt{1.54^2 +(3.978 \ 10^{-2})^2 }[/tex]
L ’= 1.54051 m
optical path difference
Λ = L’- L
Λ = 1.54051 - 1.54
Λ = 5.14 10⁻⁴ m
answer asap!!! i suck at acceleration
Answer: 2.67
Explanation: it said he went from 0 to 8 in 3 seconds so if we divide eight By three we get 2.67 rounded to the nearest hundredth so you accelerated that 2.67 m/s
Someone help me like please thank you
does the stirling engine follow the law of conservation energy
Answer:
Conservation of Energy: Like all things, Stirling Engines follow the conservation of energy principle (all the energy input is accounted for in the output in one form or another). ... The hot one supplies all of the energy QH, while the cold one removes energy QC (a necessary part of the cycle).
Explanation:
Answer: Yes
Explanation: All the energy input is accounted for in the output in one form or another
A 3.5 kg object gains 76 J of potential energy as it is lifted vertically. Find the new height of the object?
Answer:
1.72 m
Explanation:
Potential energy = mgh, where m is mass, g is acceleration due to gravity (9.8), and h is height
76 = (3.5)(9.8)h
76=44.1h
h=1.72335600907 ≈1.72 m
Answer:
:r
Explanation:r
Tobnbv346468this Ishmael
Two identical copper blocks are connected by a weightless, unstretchable cord through a frictionless pulley at the top of a thin wedge. One edge of the wedge is vertical, and the tip makes an angle of 33. The block that hangs vertically weighs 2.85 kg, and the block on the incline weighs 2.94 kg. If the two blocks do not move, what is magnitude of the force of friction on the second second block
Answer:
13.6 N
Explanation:
Since one side of the wedge is vertical and the wedge makes and angle of 33 with the horizontal, the angle between the weight of the copper block on the incline and the incline is thus 90 - 33 = 57.
Let M be the mass of the block that hangs, m be the mass of the block on the incline and T be the tension in the weightless unstretchable cord.
We assume the motion is downwards in the direction of the hanging block, M.
We now write equations of motion for each block.
So
Mg - T = Ma (1) and T - mgcos57 - F = ma where F is the frictional force on the block on the incline and a is their acceleration.
Now, since both blocks do not move, a = 0.
So, Mg - T = M(0) = 0 and T - mgcos57 - F = m(0) = 0
Mg - T = 0 (3) and T - mgcos57 - F = 0 (4)
From (3), T = Mg
Substituting T into (4), we have
T - mgcos57 - F = 0
Mg - mgcos57 - F = 0
So, Mg - mgcos57 = F
F = Mg - mgcos57
F = (M - mcos57)g
Since g = acceleration due to gravity = 9.8 m/s², and M = 2.94 kg and m = 2.85 kg.
We find F, thus
F = (2.94 kg - 2.85 kgcos57)9.8 m/s²
F = (2.94 kg - 2.85 kg × 0.5446)9.8 m/s²
F = (2.94 kg - 1.552 kg)9.8 m/s²
F = (1.388 kg)9.8 m/s²
F = 13.6024 kgm/s²
F ≅ 13.6 N
A water balloon weighing 4.5 N rests on a table. The balloon has an area of 2.6 x 10-3
m² in contact with the table. What pressure does the balloon exert on the table?
Answer:
the pressure the balloon exerts on the table is 1,730.77 N/m²
Explanation:
Given;
weight of the water balloon, F = 4.5 N
area of the balloon, A = 2.6 x 10⁻³ m²
The pressure the balloon exerts on the table is calculated as follows;
[tex]P = \frac{F}{A}[/tex]
substitute the given values and solve for pressure, P;
[tex]P = \frac{4.5}{2.6 \times 10^{-3}} \\\\P = 1,730.77 \ N/m^2[/tex]
Therefore, the pressure the balloon exerts on the table is 1,730.77 N/m²
An 80- quarterback jumps straight up in the air right before throwing a 0.43- football horizontally at 15 . How fast will he be moving backward just after releasing the ball? Suppose that the quarterback takes 0.30 to return to the ground after throwing the ball. How far d will he move horizontally, assuming his speed is constant?
Answer:
a)
the quarterback will be moving back at speed of 0.080625 m/s
b)
the distance moved horizontally by the quarterback is 0.0241875 m or 2.41875 cm
Explanation:
Given the data in the question;
a)
How fast will he be moving backward just after releasing the ball?
using conservation of momentum;
m₁v₁ = m₂v₂
v₂ = m₁v₁ / m₂
where m₁ is initial mass ( 0.43 kg )
m₂ is the final mass ( 80 kg )
v₁ is the initial velocity ( 15 m/s )
v₂ is the final velocity
so we substitute
v₂ = ( 0.43 × 15 ) / 80
v₂ = 6.45 / 80
v₂ = 0.080625 m/s
Therefore, the quarterback will be moving back at speed of 0.080625 m/s
b) Suppose that the quarterback takes 0.30 to return to the ground after throwing the ball. How far d will he move horizontally, assuming his speed is constant?
we make use of the relation between time, distance and speed;
s = d/t
d = st
where s is the speed ( 0.080625 m/s )
t is time ( 0.30 s )
so we substitute
d = 0.080625 × 0.30
d = 0.0241875 m or 2.41875 cm
Therefore, the distance moved horizontally by the quarterback is 0.0241875 m or 2.41875 cm
An airplane flies 1000 miles in 2 hours. What is its average speed in miles per hour?
Answer:
500km per hour
Explanation:
if in 2 hours the airplane flies 1000 km then 1000 divided by 2 is 500km per hour.
why the speed of light decreases as it passes from air into another substance?
Answer:
If light enters any substance with a higher refractive index (such as from air into glass) it slows down. The light bends towards the normal line. If light travels enters into a substance with a lower refractive index (such as from water into air) it speeds up. The light bends away from the normal line.
A spring has a spring constant of 450 N/m. How much must this spring be stretched to store 49 J of potential energy?
Answer:
W = 1/2 K x^2
x^2 = 2 * W / K = 2 * 49 J / (N/m) = .218 / m^2
x = .467 m
What is the force between two 1.0 X 10^-5 C charges separated by 2.0 m?
According to Coulomb's law, the force between the given charges is 0.225N which is explained below.
Coulomb's Law:Force on two identical charges q separate by a distance of r is given by:
F = kq²/r²
where k is Coulomb's constant
q is the charge
r is the separation between the charges
Given that q = 1×10⁻⁵C,
and r = 2m
So, the force between the given charges will be:
F = (9×10⁹)(1×10⁻⁵)²/2²
F = 0.225N is the required force.
Learn more about Coulomb's law:
https://brainly.com/question/506926?referrer=searchResults
If a reflected ray is 55 degrees from the normal line, they what is the angle of the
incident ray from normal?
Answer:
xplanation:
Angle of reflection is measured between the incident ray and the angle which it makes with the normal at the point where incident ray strikes the mirror surface.
Further on reflection, it makes the same angle i.e. angle of reflection is equal to angle of reflection.
Hence, as angle of incidence is 55∘ angle of reflection too is 55∘ and the angle between the incident ray and the reflected ray is 55∘+55∘=110∘
What do thermal energy and electrical energy have in common
Answer:
you can write some points its an explanation
and similarities. or common
Explanation:
Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process (see the 1ˢᵗ law of thermodynamics).
The faster the atoms or molecules move, the more heat or thermal energy they have. ... A hair straightener turns the electrical energy from a wall outlet into heat (thermal energy). 4. As electricity runs through the filaments in a space heater, the electrical energy is converted into heat (thermal energy).
The distance from the sun to Earth would be
Which phrase best completes the sentence?
any number of light years
more than one light year
exactly one light year
less than one light year
4
Answer:
less than one lightyear=d
Explanation:
I took the test.:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D::):):):):):):):):):):):):):):):):):):):):):)
A car braked with a constant deceleration of 36 ft/s2, producing skid marks measuring 50 ft before coming to a stop. How fast was the car traveling when the brakes were first applied
Answer:
Initial velocity u = 60 ft/s
Explanation:
Given:
Deceleration a = -36 ft/s²
Distance covered s =50ft
Final velocity v = 0 ft/s
Find:
Initial velocity u
Computation:
Using third equation of motion;
v² = u² + 2as
0² = u² + 2(-36)(50)
0 = u² - 3600
u² = 3600
u = 60 ft/s
Initial velocity u = 60 ft/s
A carnival ride starts at rest and is accelerated from an initial angle of zero to a final angle of 6.3 rad by a rad counterclockwise angular acceleration of 2.0 s2 What is the angular velocity at 6.3 rad?
The final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.
Final angular velocity of the carnival ride
The final angular velocity of the carnival ride is determined by applying third kinematic equation as shown below;
ωf = ωi + 2αθ
where;
ωf is the final angular velocity of the carnival ride = ?ωi is the initial angular velocity of the carnival ride = 0α is the angular acceleration = 2.0 rad/s²θ is the angular displacement of the carnival ride = 6.3 radωf = 0 + 2(2.0) x 6.3
ωf = 25.2 rad/s
Thus, the final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.
Learn more about angular velocity here: https://brainly.com/question/6860269
Answer: 5.0 rad/s
Explanation: Because that’s what khan said so try it out.