A ____ shows all of the forces acting on an object.

A ____ Shows All Of The Forces Acting On An Object.

Answers

Answer 1

Answer:

Free body diagram

Explanation:

A free body diagram shows all the forces acting on a body. Since force is a vector quantity, the magnitude and direction of the forces are shown in the free-body diagram.

Force is the push or pull on a body.

It can be via contact or without contact. Such non-contact forces acts via a force field.

In physics, this free body diagram is used extensively.


Related Questions

Please help i don't get it.
Which image matches the Topographic Map Shown?
Also, please explain how your answer is the correct answer. Why is your answer correct?

Answers

Answer:

the answer is 4

Explanation:

the picture matches eachother that's why I picked 4

Answer:

devils tower

Explanation:

on the topographic map the circular lines stop at at certain point because the moutain doesnt get any pointyer if you know what that means

in other words if the map continued with the circular lines all the way to the centerit would have been that snowny mountain

A piece of glass weights 25 g in air, 16.77g in water at 4C and 16.89g in water at 60C. Find the mean coefficient of cubical expansion of water between 4C anf 60C, taking the coefficient of linear expansion of glass as 8*10^6​

Answers

sorry i think so i dont exactly know i am sorry

Explanation:

As a certain amount of water is cooled from room temperature until it reaches 4 °C, its volume drops. The density reduces as the volume increases below 4 °C. Therefore, water's greatest density occurs at 4 degrees Celsius.

What coefficient of cubical expansion of water?

Water has an unusual trait called anomalous expansion, which causes it to enlarge rather than compress when the temperature drops from 4 °C to 0 °C, and it becomes less dense.

At temperatures not far below zero degrees Celsius, water ice is unique for having low coefficients of static and dynamic friction that range from 0.04-0.02, but as the temperature drops, these numbers rise.

Therefore, When a metal sheet's temperature rises by one degree, its coefficient of area expansion is calculated as the increase in surface area per unit of original surface area.

Learn more about coefficient here:

https://brainly.com/question/4709470

#SPJ2

From what Tim explains in the movie, what can you infer about the temperature inside a refrigerator?


Answers


What is the value of x in this diagram?


Please help

Answer:

It's closest to 3 degrees celsius

Explanation:

Four velcro-lined air-hockey disks collide with each other in a perfectly
inelastic collision. The first disk has a mass of 50.0 g and a velocity of
0.80 m/s to the west, the second disk has a mass of 60.0 g and a velocity of
2.50 m/s to the north, the third disk has a mass of 100.0 g and a velocity of
0.20 m/s to the east, and the fourth disk has a mass of 40.0 g and a
velocity of 0.50 m/s to the south. What is the final velocity of the disks
after the collision?

Answers

Answer:

The magnitude of the final velocity is approximately 0.526 m/s in approximately the direction of 8.746° East of South

Explanation:

The given collision parameters are;

The kind of collision experienced by the four velcro-lined air-hockey disk = Inelastic collision

The mass of the first disk, m₁ = 50.0 g

The velocity of the first disk, v₁ = 0.80 m/s West = -0.8·i

The mass of the second disk, m₂ = 60.0 g

The velocity of the second disk, v₂ = 2.50 m/s North = 2.5·j

The mass of the third disk, m₃ = 100.0 g

The velocity of the third disk, v₃ = 0.20 m/s East = 0.20·i

The mass of the fourth disk, m₄ = 40.0 g

The velocity of the fourth disk, v₄ = 0.50 m/s South = -0.50·j

Therefore, the total initial momentum of the four velcro-lined air-hockey disk, [tex]\Sigma P_{initial}[/tex] is given as follows;

[tex]\Sigma P_{initial}[/tex] = m₁·v₁ + m₂·v₂ + m₃·v₃ + m₄·v₄ = 50.0×(-0.80·i) + 60.0×(2.50·j) + 100 × (0.20·i) + 40.0 × (-0.50·j)

∴ [tex]\Sigma P_{initial}[/tex] = -40·i + 150·j + 20·i - 20·j = -20·i + 130·j

∴ [tex]\Sigma P_{initial}[/tex] = -20·i + 130·j

By the law of conservation of linear momentum, we have;

[tex]\Sigma P_{initial} = \Sigma P _{final}[/tex] = -20·i + 130·j

Therefore, given that the collision is perfectly inelastic, the disks move as one after the collision and the four masses are added to form one mass, "m", m = m₁ + m₂ + m₃ + m₄ = 50.0 + 60.0 + 100.0 + 40.0 = 250.0

∴ m = 250.0 g

Let, "v" represent the final velocity of the four disks moving as one after the collision

We have;

[tex]\Sigma P _{final}[/tex] = m × v = 250.0 × v = -20·i + 130·j

∴ v = -20·i/250 + 130·j/250 = -0.08·i + 0.52·j

The final velocity of the four disks after collision, v = -0.08·i + 0.52·j

The magnitude of the final velocity, [tex]\left | v \right |[/tex] = √((-0.08)² + (0.52)²) ≈ 0.526

[tex]\left | v \right |[/tex] ≈ 0.526 m/s

The direction of the final velocity, θ = arctan(0.52/(-0.08)) ≈ -81.254°

The direction of the final velocity, θ ≈ -81.254° which is 8.746° East of South

A 5.0 kg chunk of putty moving at 10m/s collides and sticks to a 7.0 kg bowling ball that is initially at rest.What is the total momentum of the bowling ball and the putty after they collide?

Answers

Answer:

Total momentum = 50kgm/s

Explanation:

Given the following data;

Mass, M1 = 5kg

Mass, M2 = 7kg

Velocity, V1 = 10m/s

Velocity, V2 = 0m/s (since it's at rest).

To find the total momentum;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

[tex] Momentum = Mass * Velocity [/tex]

The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.

Total momentum = M1V1 + M2V2

Substituting into the equation, we have;

Total momentum = 5*10 + 7*0

Total momentum = 50 + 0

Total momentum = 50 kgm/s

Therefore, the total momentum of the bowling ball and the putty after they collide is 50 kgm/s.

aluminum has a density of 270 kg/m3. what volume of aluminum would have a mass of 49.9 kg?

(unit = m^3)

Answers

Answer :

ok so i got
0.184814814814815 m^3 (round to as much as you need to)



Explanation:

To find the volume of an object, divide the mass (49.9) by the density (270) to get you the volume, which would be (0.184814814814815) in this case.

0.184[tex]m^{3}[/tex] is the answer for Acellus students!

Absorption of a light wave occurs in what material?

Answers

Answer: I think Windows.

Explanation: The absorption of light makes an object dark or opaque to the wavelengths or colors of the incoming wave: Wood is opaque to visible light. Some materials are opaque to some wavelengths of light, but transparent to others. Glass and water are opaque to ultraviolet light, but transparent to visible light.

Option.D-All materials is the correct answer.
Any object, whether living or inert, has the ability to absorb light. Absorption is always influenced by the electromagnetic frequency of the light being transmitted (i.e., its color) and the composition of the object's atoms.

How the absorption of light wave occurs-The object may absorb the light wave, in which case its energy is changed to heat.The object might reflect the light wave. Additionally, the object may transmit a light wave.Light waves behave similarly throughout the electromagnetic spectrum.Depending on the nature of the object and the light's wavelength, a light wave can be transmitted, reflected, absorbed, refracted, polarized, diffracted, or scattered when it comes into contact with a surface.When photons from incident light strike atoms and molecules, they begin to vibrate and cause absorption.An object gets hotter as its molecules move and vibrate more. The object then releases thermal energy in the form of this heat.Darker-colored objects, for example, absorb more incident light energy than lighter-colored ones do.For instance, while a light-colored concrete sidewalk reflects more energy than it absorbs, black pavement absorbs the majority of visible and UV energy.As a result, on a hot summer day, the sidewalk is cooler than the black pavement.Throughout this absorption process, photons bounce around and give up energy to numerous molecules.The longer wavelength infrared energy that results from this thermal energy radiates.A city's surface temperature can increase by up to 10° Celsius as a result of thermal radiation from the energy-absorbing asphalt and roofs.

To learn more Absorption of a light, click here-
https://brainly.com/question/26655381

#SPJ2

How much of the matter in the universe is comprised
of atoms?

a. 1%

b. 100%

c. 30%

d. 99%

Answers

Answer: I believe the correct answer is A.

The answer should be A

if a 2kg ball has and initial velocity of
4 m/s and is kicked and accelerated to
10 m/s in one second, what is the force that was applied to the ball? Rember that acceleration is the change in velocity/ change in time


please help me asap ​

Answers

Answer:

[tex]\boxed {\boxed {\sf 12 \ Newtons }}[/tex]

Explanation:

Force is equal to the product of mass and acceleration.

[tex]F=m*a[/tex]

We know the mass, but not the acceleration. Therefore, we must calculate it before we can calculate force.

1. Calculate Acceleration

Acceleration is the change in velocity over the change in time.

[tex]a=\frac{V_f-V_i}{t}[/tex]

The final velocity is 10 meters per second and the initial velocity is 4 meters per second. The time is 1 second.

[tex]V_f=10 \ m/s \\V_i= 4 \ m/s \\t= 1 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{10 \ m/s-4 \ m/s }{1 \ s}[/tex]

Solve the numerator.

[tex]a=\frac{6 \ m/s}{1 \ s }[/tex]

Divide.

[tex]a= 6 \ m/s/s=6 \ m/s^2[/tex]

2. Calculate Force

Now we know the acceleration and the mass.

[tex]m= 2 \ kg \\a= 6 \ m/s^2[/tex]

Substitute the values into the fore formula.

[tex]F= 2 \ kg * 6 \ m/s^2[/tex]

Multiply.

[tex]F= 12 \ kg*m/s^2[/tex]

1 kilogram meter per square second is equal to 1 Newton. Our answer of 12 kg*m/s² is equal to 12 Newtons

[tex]F= 12 \ N[/tex]

The force applies to the ball was 12 Newtons.

I need the answers ASAP.

Answers

Answer:

Explanation:

A) Large: As she opens her parachute, she begins to displace a large volume of air. This leads to a Large air resistance

B) increase, weight: As she falls, the air resistance force increases. Now there is a force acting in opposite directions to her weight.

C)Weight, Decelerate: The skydiver has only the downward force of her weight pulling down on her, so she starts to decelerate

D) Weight, Upward, Resultant:

Her weight is now equal to the upward force from the ground. Her resultant  force is then zero

E) Increases, same, constant,  resultant, terminal:

As she accelerates faster, the air resistance force increases. It is now the same as her weight. She now moves at a constant speed because the resultant force acting on her is zero. She is now at her terminal velocity.

F) Increases, same, constant, terminal:

As she decelerates, the air resistance force on her parachute increases until it is the same as her weight. She is now moving with a constant speed until she hits the ground - a new slower terminal velocity

4) Which is the BEST description of a tectonic plate? *
O A. Tectonic plates consist of the lithosphere and part of the asthenosphere.
O B.Tectonic plates are large pieces of mesosphere that never move.
C. Tectonic plates are large pieces of lithosphere that move on tope of the
asthenosphere.
O D. None of these answers is correct.

Answers

Using process of elimination the answer is D

Answer:

The answer is A

Explanation: i took k12

A wheel of mass 50 kg has a radius of 0.4 m. It is making 480 rpm. What is the
torque necessary to bring it to rest in 40 seconds?
Solution:

Answers

Answer:

The torque necessary to bring the wheel to rest in 40 seconds is 10.4 N·m

Explanation:

The question is with regards to rotational motion

The rotary motion parameters are;

The mass of the wheel = 50 kg

The radius of the wheel = 0.4 m

The rate of rotation of the wheel = 480 rpm

The time in which the wheel is to be brought to rest = 40 s

The rotational rate of the wheel in rotation per second is given as follows;

480 r.p.m = 480 r.p.m × 1 minute/(60 seconds) = 8 revolution/second

1 revolution = 2·π radians

Therefore, we have the angular velocity, ω, given as follows;

ω = 2·π × 8 revolutions/second ≈ 50.3 rad/s

The angular acceleration, α, is given as follows;

[tex]\alpha = \dfrac{\Delta \omega}{\Delta t} = \dfrac{\omega _2 - \omega_1}{t_2 - t_1}[/tex]

Whereby the wheel is brought to rest from its initially constant rotational motion in 40 seconds, we have;

ω₁ ≈ 50.3 rad/s, ω₂ = 0 rad/s, and t₂ - t₁ = 40 seconds

Plugging in the values for the variables of the equation for the angular acceleration, "α", we get;

[tex]\alpha = \dfrac{0 - 50.3 \ rad/s}{40 \ s} \approx 1.3 \ rad/s^2[/tex]

The torque on the wheel, τ, is given as follows;

τ = m·r²·α

Where;

m = The mass of the object = 50 kg

r = The radius of the wheel = 0.4 m

α = The acceleration of the wheel ≈ 1.3 rad/s²

Therefore;

τ = 50 kg × (0.4 m)² × 1.3 rad/s² ≈ 10.4 N·m

The torque necessary to bring the wheel to rest in 40 seconds = τ ≈ 10.4 N·m.

Answer:

-10.048 N m

Explanation:

whats the result of rounding 52.8015 into five significant figures​

Answers

Answer:

52.802

Explanation:

"Significant figures" in Mathematics refer to the digits that give accuracy to the value of a measurement. There are specific rules when it comes to determining the significant figures. For example, all non-zero digits are considered significant and zeroes located in-between non-zero numbers are significant. In the number given above, the digit "0" is located between "8" and "1," therefore, it is significant. All the digits above are significant.

The problem is only asking for "five" significant figures. We can do this by counting from the left to the right. By this means, we know that the number will be rounded off to the nearest thousandths, which is "1." The number after 1 is 5, which means that 1 digit will be added to number 1, thus, making the digit into "2." The last digit (5) will then be removed.

Explanation:

five significant of 52.8015=52.801 ..

find not true when the water freezes...

Answers

Answer: i think its c

Explanation:

Answer:

a

Explanation:

A dog playing fetch starts at rest and accelerates at 4.5m/s2 north. It takes the dog 7 seconds to catch the ball. What was the speed of the dog when he caught the ball?

Answers

Answer:

31.5m/s

Explanation:

Given the following

acceleration a = 4.5m/s²

Time t= 7secs

Required

Final speed v = ?

Using the equation of motion

v = u+at

v = 0+4.5(7)

v = 31.5m/s

Hence the speed of the dog is 31.5m/s

Look at the atoms below
a. Atom W: 9 protons and 9 neutrons
b. Atom X: 8 protons and 9 neutrons
c. Atom Y: 9 protons and 9 neutrons
d. Atom Z: 9 protons and 10 neutrons
Which ones below are isotopes of each other and why?

Answers

element z are isotopes because number of netron are different and number of protons are same

Jackson throws a football 30 meters at a speed of 15 m/s. How long was the football in the air before Laurence caught it for touchdown

Answers

Answer:

2s

Explanation:

Given parameters:

Distance  = 30m

Speed  = 15m/s

Unknown:

Time before Laurence caught it = ?

Solution:

To solve this problem;

    Speed  = [tex]\frac{disance }{time}[/tex]  

 Time taken  = [tex]\frac{distance }{speed }[/tex]   = [tex]\frac{30}{15}[/tex]  = 2s

The time it takes is 2s

Given:

30 metersSpeed of 15 m/s

We will solve:

Speed  = [tex]\frac{distance}{time}[/tex]

Time taken  = [tex]\frac{distance}{time}[/tex] = [tex]\frac{30m}{15m/s}[/tex] = 2s

The time it takes is 2s

4. A toy car travels 60 m during 5.7 s at a constant speed. What is the speed of the toy car?
15.556
13.526
6.116
10.526
None of these is correct.

Answers

Answer: 10.526m/s

Explanation:

The speed of the toy car would be calculated as the distance travelled by the toy card divided by the time taken. This will be:

= Distance travelled / Time taken

= 60/5.7

= 10.526m/s

The speed of the toy car is 10.526 meters per second.

(a) Explain the advantage of using a plane mirror in optical testing.
explain your answer ​

Answers

Answer: Optical test is a test which is used to assess vision and ability of the person to focus on the objects.

Explanation:

The following are the advantages of utilizing plane mirror in optical testing:

1. When a plane mirror is used for testing the image of the test card must be placed at distance equal to the distance of the object.  

2. Larger distance in between the object or test card and viewer is obtained. This can help in determining the exact ability of the eye to focus on objects.

a) Las siglas M. RU significan

Answers

Answer:

Ver la explicación a continuación.

Explanation:

En física estas siglas significan movimiento rectilíneo uniforme, es decir es el tipo de movimiento donde la velocidad es constante. La velocidad no cambia con el tiempo.

Este tipo de movimiento se puede describir con la siguiente ecuación.

[tex]x=x_{0}+v*t[/tex]

Donde:

x = posición final [m]

xo = posición inicial [m]

v = velocidad [m/s]

t = tiempo [s]

Body Systems Directly Involved (Give at Least 2)
Cartoon
13. Ouch! You step on a tack and jump away without even thinking. Then you decide to pick up the tack and place it back in a desk drawer.
I need the second one the nervous system and...

Answers

Answer:

Nervous system and immune system

Explanation:

The nervous system is involved because you immediately jumped away, that ur brain and nerves initiating the fight or flight response. The immune system is involved because the tack most likely pierced your skin, so your immune system needs to work to make sure the wound does not get infected.

someone please help with this

Answers

Answer:

The new force is 2/3 of the original force

Explanation:

Coulomb's Law

The electrical force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.

Written as a formula:

[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]

Where:

[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]

q1, q2 = the objects' charge

d= The distance between the objects

Suppose the first charge is doubled (2q1) and the second charge is one-third of the original charge (q2/3). Now the force is:

[tex]\displaystyle F'=k\frac{2q_1*q_2/3}{d^2}[/tex]

Factoring out 2/3:

[tex]\displaystyle F'=\frac{2}{3}k\frac{q_1*q_2}{d^2}[/tex]

Substituting the original force:

[tex]F'=\frac{2}{3}F[/tex]

The new force is 2/3 of the original force

ANSWER QUICK 30 POINTS
What force controls the movement of the planets around the sun, holds together stars grouped in galaxies, and galaxies grouped in clusters? Thoroughly explain your answer, making sure to include an example and describe how this force keeps planets in orbit. Make sure to write at least 3-5 sentences and proper conventions (spelling, grammar, punctuation, etc.) to respond. Put all answers in your own words (pls dont just take my points :( )

Answers

Answer:

Gravity creates stars and planets by pulling together the material from which they are made.

Explanation: Thats the only thing i have im stuck on the tga quiz

Which of these would be the most efficient means to transmit light pulses over long distances?

Answers

Answer: It’s fiber optics so B

Which type of matter is likely to absorb the most sound waves? A. Metal door B. Loudspeaker C. Hot air O D. Foam wall​

Answers

Answer:

its either A or D

Explanation:

They use foam walls in like asylums but in the movies all the bad guys say "They can't hear you the metal is too thick" so its either one of those, hope it helped

Sound absorbing foams are typically softer and more lightweight than their sound blocking counterparts. This open and flexible cell structure acts as a natural soundwave absorber and prevents noises from reverberating off hard surfaces like walls, floors and ceilings.

What are sound waves ?

"A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords."

What is sound ?

"Sound is a vibration that propagates as an acoustic wave, through a transmission medium such as a gas, liquid or solid. In human physiology and psychology, sound is the reception of such waves and their perception by the brain."

What is noise ?

Sound is defined as vibrations that travel through air or another medium that can be heard when they reach a person's or animal's ears. Noise is defined as unwanted sound. In engineering, noise has the additional connotation of signals varying over time without meaning, whereas sound connotes meaningful signals.

Know more about sound wave here

https://brainly.com/question/11797560

#SPJ2

Compounds are made from the atoms of two or more______?

Answers

Answer:

elements

not really an explanation

How many centimeters are there in 9.3 meters

Answers

Answer:

930 centimeters

Explanation:

a cellphone weighing 80 g is flying to the air at 15 m/s what is it's kinetic energy​

Answers

Answer:

9J

Explanation:

Given parameters:

Mass of cell phone  = 80g

          1000g  = 1kg

            80g is therefore 0.08kg

Velocity of the cellphone  = 15m/s

Unknown:

Kinetic energy of the cellphone  = ?

Solution:

The kinetic energy of a body is the energy due to its motion.    

 It is expressed as:

    K.E  = [tex]\frac{1}{2}[/tex] mv²   =  [tex]\frac{1}{2}[/tex]  x 0.08 x 15²   = 9J

HELP ME ASAP PLZZ

Which of the following is not a measurement taken by a radiosonde?

a. atmospheric composition

b. atmospheric pressure

c. wind speed

d. wind direction

Answers

Answer:

A atmospheric composition

The diagram shows a wave traveling through a medium.

Identify point B.

amplitude
crest
trough
wavelength

Answers

The answer is b. The crest.

Hope this helps!

The point B represent the crest of the wave. The crest is the peak of the wave. While the trough is the lowest.

What is wavelength?

The distance between two successive troughs or crests is known as the wavelength.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The point B represent the crest of the wave. The crest is the peak of the wave. While the trough is the lowest.

Hence, option B is correct.

To learn more about the wavelength, refer to the link;

brainly.com/question/7143261

#SPJ2

Other Questions
What is the relationship between the mass of the boat and the mass of the displacedliquid? need to know soon! please help A newspaper headline reads the following,"New Secretary of State appointed and confirmed"Which parts of the national government participated in the process described in the newspaper headline? aSenate and president bSupreme Court and president cHouse of Representatives and Senate dSupreme Court and House of Representatives Can someone help me with notes for an essay? Will give brainliest and repost for 100 pts if yes.I need some notes for this: The oceans tides are not only affected by the shape of the coastlines, or slope of the ocean floor, but also by the gravitational tug of the Sun and the Moon. Write a 600 word report on the effect of the Moon, and Sun, on tidal reaction, and high tides and low tides. What orientation are the Sun and Moon in to create high tides? Low tides? There are two special types of tides. What are they called and what positions are the Sun and the Moon in during these times? Write your response in the essay box below. can I get help with this Aiden cuts a ball of string into 14 equal pieces. The length of each piece of string is 2 1/4 yards. What is the original length of the ball of string? What territories that were acquired by the United States helped bring about the need for compromises dealing with slavery? Jenson is a senior-level manager in his organization. He makes strategic-level decisions to improve the sales or to increase the profits of the organization. Which information system will reflect the strategic decisions that Jenson makes as a senior manager? A. Executive information system B. Management information system C. Transaction processing system D. Decision support system Please help!And explain the answers too! For the equation 2x + 7 =30, x = 3O TrueO False Solving a Real-World ProblemMr. Martin is giving a math test next period. The test, which is worth 100 points, has 29 problems. Each problem isworth either 5 points or 2 points. Write a system of equations that can be used to find how many problems of eachpoint value are on the test.Let x be the number of questions worth 5 points and let y be the number of questions worth 2 points.x + y = 29, 5x + 2y = 100x + y = 100, 5x + 2y = 295x + y = 29, 2y + x = 1002x + y = 100, 5y + x = 29 What Can Michael do to figure out what makes the merry-go-round easiest to push? PLEASEEEE HELP ASAP! PLEASE HELp 3. If 12.5 grams of copper are reacted with excess chlorine gas, then 25.4 grams ofcopper (II) chloride are produced. Calculate the theoretical yield and the percentyield. Cu + Cl2 CuCl2 how many second are in a year and haw many minutes are in a year? 2. What do they all say about family life? Choose the correct word for each gap.auntcousin daughter grandchildren granddaughtergrandfather grandmother grandson husband mothernephews nieces parents sisters son uncle wifeAlan:Theresa:Stephen:Michael:My (1) ... San......... Michael, is teaching me to use a computer. I want to get on theInternet.It was my birthday last week. My (2).nephews.... Freddie made me a big chocolate cake.My (3) ...uncle........... Michael is great. He always buys me the best computer games.I've got three (4)...... and two (5) ....Christmas is a veryexpensive time for me!My (6) ..wife..............'s family is really nice. Her (7)..mo.ther........, Theresa, is greatwith the children.Emily is always very tired. Her (8)...husband....., Craig, never helps her with the twins.My (9) .......... Emily is quite fat.I hate my (10) ..... Sistexs......... Lizzie and Vicky. They cry all the time. My (11)Stephen, is cool. He's brilliant at football.Craig:Rebecca:Sylvia:Freddie: In the United States, a bicyclist is killed:A. (Every 12 hoursB. Every weekc. Every dayD. Every 6 hours What interval notation represents the data graphed below?A. [-, -2) U [4, ]B. [-, -2] U (4, ]C. (-, -2] U (4, ]D. (-, -2) U [4, ) Correct the sentence dad begun to doze off in his chair after dinner Which company had a monopoly in tea sales? Select the correct answer. What is the solution of [tex] \frac{5}{2}x - 7 = \frac{3}{4}x + 14[/tex]A. x = -6B. x = 6C. x = 8D. x = 12