Answer:
Pink only
Explanation:
AP3X
What is Gallium Sulfide(Ga2S3).
Ionic or Covalent?
in 4 season countries, the temperatire may drop till below 0°c during the peak of winter. why does the surface of the river or lake freeze?
Answer:
Explained below
Explanation:
Normally, when the temperature of water gets colder than 4° C, it starts expanding and will become less dense the colder it becomes. As the temperature gets closer to freezing point, the colder water will float to the top and the warmer water sinks to the bottom. This is mainly because of how the density of water behaves with falling temperatures.
Thus, the lake/river water will freeze from top to down as a a result of that phenomenon of colder water floating to the top and the warmer water sinking to the bottom.
When collecting H2 gas from the reaction of Mg with HCl, it is desirable to have desirable to have which of the following scenarios?
Answer:
Explanation:
Excess hci
Which statement describes longwave radiation? Choose the correct answer.
O It does not affect Earth's energy budget.
O It is solar energy that falls on Earth's features.
O It makes up about 30% of the energy emitted by Earth.
O It is infrared radiation emitted after being absorbed by Earth's features.
Answer: D
Explanation: Heat resulting from the absorption of incoming shortwave radiation is emitted as longwave radiation
Question 6 W If 50. mL of 1.0 M NaOH is diluted with distilled water to a volume of 2.0 L, the concentration of the resulting solution is А 0.025 M B 0.050 M C 0.10 M D 0.50 M E 1.0 M
Answer:
im not sure man
Explanation:
Object A has a mass of 500g and object B has a mass of 300g. Which object is more dense?
Answer:
500g because 300g is less dense than 500g its kinda like a weight
Explanation:
i
1/2 divided by 20km
please answer
Answer:
10 is the answer for the question
A student drops a ball from 5 feet above the ground. After bouncing once, it only reaches a maximum height of 4 feet above the ground. Use energy terms to explain why the ball did not reach its original height after bouncing once.
Answer:
because the gravity of the ball can't go that high
There is a law called conservation of energy which states that energy can neither be created nor be destroyed. It can be only transferred from one form to another form. Therefore, some energy is lost to the environment as sound or heat.
What is energy transfer?Energy transfer is a phenomenon in which energy transfer from one matter to another matter. Energy can be transferred in two forms that are by doing work or by transferring heat.
Heat can be transferred by three ways conduction, convention and radiation. In conduction, when two object are in direct contact, transfer of molecules takes place. As the ball impacted the ground, the energy would have been lost to the environment as sound or heat.
Therefore, some energy is lost to the environment as sound or heat.
Learn more about energy transfer, here:
https://brainly.com/question/18649915
#SPJ5
ANSWER THESE 5 MULTPLE CHOICE QUESTIONS!!!
I'LL GIVE 30 POINTS AND A BRAINIEST:)
Answer: 1, magnesium & mg
2, two energy shells
Explanation:
ANSWER ASAP!
How does a combustion reaction form?
If 1520 J are added to 16.5 g of water at 63.1 c what will the final temperature be
How many electrons would be in a calcium cation with a positive 2 charge?
Number of electrons in a Ca²⁺ = 18
Further explanationIn an atom there are levels of energy in the shell and sub shell
This energy level is expressed in the form of electron configurations.
Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f. The maximum number of electrons for each sub shell is
• s: 2 electrons
• p: 6 electrons
• d: 10 electrons and
• f: 14 electrons
Charging electrons in the sub shell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
The element Ca has an atomic number of 20, so the number of electrons and protons (in neutral atoms) is also 20
Electron configuration of Ca : 1s², 2s², 2p⁶, 3s², 3p⁶, 4s² ⇒[Ar] 4s²
When Ca releases 2 electrons to gain stability (forming Ca²⁺ cations), the number of electrons becomes:
[tex]\tt 20-2 = 18[/tex]
and the electron configuration (Ca²⁺ ) becomes:
1s², 2s², 2p⁶, 3s², 3p⁶
A material that conducts electricity only at high temperatures.
A.Semiconductor
B.Compound
C.Luster
D.Brittle
Answer:
Semiconductor
Explanation:
Semiconductors conduct electricity as the temperatures increase.
Hope this helped.
Why is radium more reactive than calcium?
Hydrofluoric acid is what type of acid?
Hydrofluoric acid is a solution of hydrogen fluoride (HF) in water. Solutions of HF are colourless, acidic and highly corrosive. It is used to make most fluorine-containing compounds; examples include the commonly used pharmaceutical antidepressant medication fluoxetine (Prozac) and the material PTFE (Teflon).
The process in which the nuclei of two atoms combine to form a heavier atom, releasing a large amount of energy is known as -
Answer: Nuclear fusion
Explanation:Nuclear fusion is the process by which two or more atomic nuclei join together to form a single heavier nucleus and large amounts of energy.
Which would balance the equation? (Look at picture on my laptop)
-3
-4
-1
-2
The answer is 2
2H2 + O2 ---> 2H2O
I’ll mark you brainlist
Answer:
High mass star.
Explanation:
The mass of a star defines its life span. the least massive stars will live the longest and the most massive stars will use their fuel in a few million years and end in a spectacular supernova.
how many bonds can nitrogen have
Answer:
3
Explanation:
I think so, let me know if its wrong.
2Mg + O2
2Mgo
what is the coefficient
Answer:
In this chemical equation, there are two main elements. Those elements are magnesium (Mg) and oxygen (O). Molecules are a group of atoms bonded together, and in this case, the oxygen molecules is O2, but not 2MgO because there are two different molecules in this compound. Coefficients are a number that multiply an entire molecule, and are also placed in front of it. In this case, O2 has no coefficient, but a subscript of 2. But, every molecule in this equation must have a coefficient and if add a coefficient of 1 to the oxygen molecule, it does nothing to the overall balancing of equations.
So, the answer: coefficient to the oxygen molecule is 2.
Have a great day/night, stay safe, and merry christmas!
Which of the following elements has the lowest lonization energy
A. Flourine
B. Francium
C. Hydrogen
D. Lithium
Answer:
Francium
Explanation:
Explanation:
B.francium................
calculate the mass of the reactants in the synthesis of water from hydrogen and oxygen. PLEASE HELP
Answer:
noc
Explanation:
xd
Answer:
It is possible to fill a balloon with a mixture of hydrogen and oxygen and find that ... the following equation is balanced because the total mass of the reactants is ... of hydrogen and one mole of oxygen is equal to the mass of two moles of water.
Explanation:
ig this can be Explanation:
and the answer:)
Based on the molecular structures of chloromethane and methane shown, a student makes the claim that a pure sample of chloromethane has stronger intermolecular forces than a pure sample of methane has.
Answer:
Yes, chloromethane has stronger intermolecular forces than a pure sample of methane has.
Explanation:
In both methane and chloromethane, there are weak dispersion forces. However, in methane, the dispersion forces are the only intermolecular forces present. Also, the lower molar mass of methane means that it has a lower degree of dispersion forces.
For chloromethane, there is in addition to dispersion forces, dipole-dipole interaction arising from the polar C-Cl bond in the molecule. Also the molar mass of chloromethane is greater than that of methane implying a greater magnitude of dispersion forces in operation.
Therefore, chloromethane has stronger intermolecular forces than a pure sample of methane has.
Yes, the claim that a pure sample of chloromethane has stronger intermolecular forces than a pure sample of methane is correct.
Intermolecular forces are weaker forces (Van Deer Waal forces) of attraction that pull molecules together. They are weaker than covalent bonds and they arise as a result of interaction between positively charged and negatively charged species (polarity).
The types of Van Deer Waal forces that exist are in decreasing order are:
dipole-dipole forcedipole-induced dipole forceinduced dipole-induced dipole forceIf we consider the molecular structures of both chloromethane and methane, we will realize that chloromethane has a higher intermolecular force than methane. This is due to the bond polarizability in chloromethane that does not exist in methane.
Thus, chloromethane exhibit a dipole-dipole force of attraction while methane undergoes a weak induced dipole-induced dipole force due to its lower polarity than chloromethane.
Learn more about bond polarity here:
https://brainly.com/question/15099999?referrer=searchResults
What type of plate boundary forms
snowy mountains?
J. convergent
K. divergent
L. transform
M. transition
Answer:
I believe it's j, convergent plate boundaries
The type of plate boundary that forms snowy mountains are convergent plate boundaries. option J is correct.
What are convergent plate boundaries?The convergent plate boundaries are which consist of two plates that move toward each other which results in the process called collision of two plates with each other.
The snowy mountains are full of snow which melts due to the change in temperature and leads to the formation of different plates and boundaries and the collision of two continental plates leads to the formation of this.
Therefore, option J is correct, the type of plate boundary that forms snowy mountains are convergent plate boundaries.
Learn more about convergent plate boundaries, here:
https://brainly.com/question/23845744
#SPJ6
What is the wavelength of electromagnetic radiation which has a frequency of 4.464 x 10^14 s-1
a. 1.338 x 10^23 m
b. 1.489 x 10^-6 m
c. 6.716 x 10^-7 nm
d. 671.6 nm
Answer:
d. 671.6 nm
Explanation:
It is possible to solve the wavelength of a radiation from its frequency -or vice versa- using:
λ = c / f
Where λ is wavelength,
c is speed of light, a constant (2.998x10⁸m/s)
And f is frequency: 4.464x10¹⁴s⁻¹
Replacing:
λ = 2.998x10⁸m/s / 4.464x10¹⁴s⁻¹
λ = 6.716x10⁻⁷m
As 1m = 1x10⁹nm:
6.716x10⁻⁷m * (1x10⁹nm / 1m) = 671.6nm
Right answer is:
d. 671.6 nm
Number of H in 3(NH4)2Cro4
The number of H atoms in 3(NH₄)₂CrO₄ = 24
Further explanationThe empirical formula is the smallest comparison of atoms of compound forming elements.
A molecular formula is a formula that shows the number of atomic elements that make up a compound.
(empirical formula) n = molecular formula
Subscripts in the chemical formula indicate the number of atoms
The compound of 3(NH₄)₂CrO₄ ( 3 molecules of (NH₄)₂CrO₄ ) :
Number of H :
[tex]\tt 4\times 2(subscript)\times 3(coefficient,number~of~molecules)=24~atoms[/tex]
The number of Hydrogen (H) atoms in the compound, 3(NH₄)₂CrO₄ is 1.44×10²⁵ atoms
How to determine the mole of HMole of 3(NH₄)₂CrO₄ = 1 mole Mole of H in 3(NH₄)₂CrO₄ = 3 × 8 = 24 moles How to determine the number of atomsFrom Avogadro's hypothesis,
1 mole of H = 6.02×10²³ atoms
Therefore,
24 moles of H = 24 × 6.02×10²³
24 moles of H = 1.44×10²⁵ atoms
Thus, the number of atoms of H in 3(NH₄)₂CrO₄ is 1.44×10²⁵ atoms
Learn more about Avogadro's number:
https://brainly.com/question/26141731
Highlight the larger unit of measure under each letter (a-f). Then, write if the unit highlighted measures distance, volume, or weight (mass).
a. meter or kilometer
b. yard or foot
c. cup or quart
d. pound or ounce
e. liter or milliliter
f. gram or kilogram
Answer:
2. The unit could be gram or kilogram ⇒ answer f
3. The larger unit is kilogram and measures weight (mass)
Step-by-step explanation:
Let us revise the SI units of measuring
The SI unit of measuring distance is meter
The SI unit of measuring volume is liter
The SI unit of measuring mass is kilogram
2.
When this pet hamster is placed on a digital scale, the scale reads 1.5
∵ The SI unit of measuring weight (mass) is kilogram
∵ The scale reads 1.5
∴ The unit is kilogram
The unit could be gram or kilogram
3.
∵ The larger unit of measure is kilogram
∵ Kilogram measures the weight (mass)
∴ The unit measures weight (mass)
The larger unit is kilogram and measures weight (mass)
Explanation:
Una muestra de 2,36 gramos de NaHCO3 se descompuso completamente en un experimento. 2NaHCO3 → Na2CO3 + H2CO3 En este experimento, el dióxido de carbono y los vapores de agua se combinan para formar H2CO3. Después de la descomposición, el Na2CO3 tenía una masa de 1,57 gramos. Determine la masa del H2CO3 producido. Calcule el porcentaje de rendimiento de H2CO3 para la reacción.
Answer:
105%
Explanation:
El porcentaje de rendimiento se define como la masa obtenida del producto (En este caso, en términos de H2CO3), dividida en la masa teórica que debe ser producida.
La masa real se obtiene con las moles del otro producto que fueron producidas (Que son las mismas moles producidas de H2CO3)
Y la masa teórica se obtiene a partir de las moles de reactivo adicionadas:
Masa teórica:
2.36g NaHCO3 * (1mol / 84g) = 0.0281 moles de NaHCO3
0.0281 moles de NaHCO3 * (1mol H2CO3 / 2 moles NaHCO3) =
0.014 moles de H2CO3 son producidas. La masa es:
0.014 moles de H2CO3 * (62g / mol) = 0.871g es la masa teórica
Masa real:
1.57g Na2CO3 * (1mol / 106g) = 0.014 moles de Na2CO3
0.0148 moles de Na2CO3 * (1mol H2CO3 / 1 moles Na2CO3) =
0.0148 moles de H2CO3 son producidas. La masa es:
0.0148 moles de H2CO3 * (62g / mol) = 0.918g es la masa real producida
Así, el porcentaje de rendimiento es:
0.918g / 0.871g * 100 =
105%
A 180-W resistor has 0.10 A of current through it. What is the potential difference across the resistor? Include numerical answer with correct units.
Ur a real one if u solve this no cap
And I only got 10 min to get the answer
Answer:
1800V
Explanation:
Given parameters:
Power in the resistor = 180W
Current = 0.1A
Unknown:
Potential difference = ?
Solution:
The power in a circuit is given as:
P = I V
P is the power
I is the current
V is the potential difference
Now insert the parameters and solve for V;
180 = 0.1 x V
V = 1800V
Ples help is it Fission, Fusion, or Both 1. Incredibly high amounts of energy are released. ____ 2. Results in a nuclear change. ______ 3. The end product is heavier. _____ 4. Two nuclei become one. ____ 5. The end product is lighter. ____
Answer:
1. fission
2. both
3. fusion
4. fusion
5. fission
Explanation:
Fission refers to the splitting of a single nucleus into two or more small nuclei while fusion refers to the combination of two or more small nuclei into one heavy nucleus.
When a single heavy nucleus splits, energy is released and the end products are 2 or more lighter nuclei. On the other hand, when several light nuclei fuse into one nucleus, energy is absorbed and the end product is one heavy nucleus. Both fission and fusion result in a nuclear change.