Answer:
0.0012 mol/L.
Explanation:
From the question given above, the following data were obtained:
Number of mole of AgNO₃ = 62.3 μmol
Volume = 50 mL
Molarity of AgNO₃ =?
Next, we shall convert 62.3 μmol to mole. This can be obtained as follow as follow:
1 μmol = 10¯⁶ mole
Therefore,
62.3 μmol = 62.3 × 10¯⁶
62.3 μmol = 62.3×10¯⁶ mole
Next, we shall convert 50 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
50 mL = 50 mL × 1 L / 1000 mL
50 mL = 0.05 L
Finally, we shall determine the concentration of AgNO₃ in mol/L as follow:
Number of mole of AgNO₃ = 62.3×10¯⁶ mole
Volume = 0.05 L
Molarity of AgNO₃ =?
Molarity = mole /Volume
Molarity of AgNO₃ = 62.3×10¯⁶ / 0.05
Molarity of AgNO₃ = 0.0012 mol/L
Thus, the concentration of AgNO₃ is 0.0012 mol/L
Pls help ASAP ! Identify the following reaction: H2 + O2 → H2O
Group of answer choices
synthesis reaction
decomposition reaction
single replacement reaction
double replacement reaction
Answer:
Synthesis Reaction
Explanation:
Here we see H2 and O2 are being combined H2O. Synthesis reactions are where we see a combination to make a single product.
So here it'd be A + B =AB
2Na(s)+Cl2(g)→2NaCl(s)
Decomposition would be the break down of a compound into 2, the opposite of synthesis.
AB = A + B
2HgO(s)→2Hg(l)+O2(g)
Single replacement is where 1 element replaces another in a reaction, or switches place with 1 element.
AY + B = A + BY
2 HCl(aq) + Zn(s) → ZnCl2(aq) + H2(g)
Double replacement is similar but 2 elements are switch/replaced.
AY + BX = AX + BY
CuCl2(aq) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 AgCl(s)
Can somebody please help me!!
Answer:
acceleration
pls dont report me
Section I: Experimental Overview
Provide background information.
Include the hypothesis(es).
Summarize the procedures.
Section II: Data and Observations
Summarize the data you collected in the lab guide.
Include information from data tables.
Include any written observations that are relevant.
Section III: Analysis and Discussion
Discuss any important calculations or formulas used.
Identify key results, what the results indicate, and any trends in the data.
Include graphs (if constructed) that display trends in the data.
Provide possible reasons for any problems with the experiment, or unexpected data.
Section IV: Conclusions
Identify if the hypothesis(es) was (were) supported or refuted.
Provide logical reasoning based on data.
Explain how the experiment could be improved.
To help you write your lab report, you will first answer the questions listed below by reflecting on the experiment you have just completed. Then you will use the answers to these questions to write the lab report that you will turn into your teacher.
You can upload your completed report with the upload tool in formats such as , Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Experimental Overview
What is the purpose of the lab, the importance of the topic, and the question you are trying to answer?
What is your hypothesis (or hypotheses) for this experiment?
What methods are you using to test this (or each) hypothesis?
Section II: Data and Observations
Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings?
Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report?
Section III: Analysis and Discussion
What do the key results indicate?
If you constructed graphs, what trends do they indicate in your data?
Answer:
If you constructed graphs, what trends do they indicate in your data?
which of the following are the correct formulas for potassium oxide and calcium oxide respectively
Explanation:
potassium oxide is K2O
calcium oxide is CaO
calcium oxide is used to make glass
potassium oxide is used in fertilizer
What's the wavelength in meters of an electron traveling at 9.5 x 10^7 m/s? The mass of an electron is 9.11 x 10^-28 g.
Select one:
a. 7.66 x 10-15 m
b.7.66 x 10-12 m
c. 3.47 x 1027 m
d. 3.47 x 1030 m
Answer:
where:
• A is the wavelength in m.
• h = 6.626 x 10-34Js is Planck's
constant.
• m is the mass of the particle, such as the electron, in kg. The particle must have a mass for this relation to work.
• v is the forward velocity of the particle, in m/s.
Hence, the wavelength is:
6.626 x 10-34J.s
(9.1094 × 10 −³¹kg) (5 × 10³m/s)
We know that 1 J 1 kg. m²/s². So:
6.626 × 10-³4 g · m² / ø
9.1094 x 10 - 31) (5 x 105 m/s)
= 1.455 x 10-9 m
=
= 1.455 nm
Which statement is true about fossils?
a.Only the remains of animals, and not plant, can be made into a fossil.
b.To officially be a fossil, the remains of an entire organism must be found.
c.The remains of an organism that lived 500 years ago is called a fossil.
d.A fossil is any trace of prehistoric life.
Answer:
d, the remains of an organism have to be 10,000 years old to be classified as a fossile:)
Answer:
(d)
Explanation:took the quiz
Can somebody please help me!!!!
Answer:
Friston to energy
Explanation:
Friction to Energy as its a energy stooping the object form moving
Explain using balanced chemical equations, the alkaline hydrolysis reaction of esters.
Answer:
The alkaline hydrolysis of ester is known as saponification. When ester is heated with aqueous NaOH, sodium salt of acid and alcohol are formed.
The process of saponification of an ester in an alkaline solution. Alcohol and sodium salt of acid are created when the bis heated with aqueous NaOH.
What is saponification ?Esters are converted into soap and alcohol through the process of saponification, which uses an aqueous alkali. Fatty acids, which are long-chain carboxylic acids, are the building blocks of soaps. Sodium stearate is a regular soap ingredient.
From the Latin sapo, which signifies soap, the reaction is known as a saponification. The term is derived from the fact that fats were once hydrolyzed into esters to produce soap.
Particularly in the food industry, saponification is significant because it makes it simpler to estimate the amount of free fatty acids present in a specific food product. The quantity of free fatty acid can be determined by measuring how much alkali was needed to neutralize the fat or oil.
Thus,the alkaline hydrolysis reaction of esters is called as saponification.
To learn more about saponification, follow the link;
https://brainly.com/question/16495580
#SPJ2
If 175.6 joules of energy are applied to a sample of Aluminum and its temperature changed by 35.4 degrees then what was the weight of the Aluminum sample?
Answer:
5.51g
Explanation:
Using the following formula:
Q = m × c × ∆T
Where;
Q = amount of heat in Joules
m = mass/weight of Aluminum
c = specific heat of Aluminum (0.900 J/g°C)
∆T = change in temperature.
Based on the information given in this question, Q = 175.6 joules, ∆T = 35.4°C, c = 0.900 J/g°C.
Using, Q = m × c × ∆T
175.6 = m × 0.900 × 35.4
175.6 = 31.86m
m = 175.6/31.86
m = 5.51g
The weight of the aluminum sample is 5.51g.
Organelles that use energy from sunlight to produce food are called mitochondria
O True
O False
Answer:
Organelles that use energy from sunlight to produce food are called mitochondria.
False
By which method the following mixture can be separated?(i)mixture of colours (ii) Minerals oil.
Answer:
mixture of colours answer
What is the benefit of adding sodium hydroxide and sulfuric acid?
Answer:
When sodium hydroxide react with sulphuric acid they form Sodium sulphate and water. The reactants is base and an acid, which leads to neutralization process and yields a salt .
Answered by The One and only #Queen
A mixture of gaseous reactants is put into a cylinder, where a chemical reaction turns them into gaseous products. The cylinder has a piston that moves in or out, as necessary, to keep a constant pressure on the mixture of . The cylinder is also submerged in a large insulated water bath. (See sketch at right.) From previous experiments, this chemical reaction is known to release of energy. The position of the piston is monitored, and it is determined from this data that the system does of work on the piston during the reaction.
Answer:
It is exothermic in nature.
Explanation:
(1) The reaction is exothermic in nature because it releases heat energy.
(2) Yes, the temperature of the water go up as the reaction releases heat energy and the temperature cool down as the heat energy is completely removed from the water.
(3) The piston move in when the pressure in the cylinder decreases and the piston move out when increase of pressure occur.
(4) As the outside movement of piston occurs, so we can say that the gas mixture does work on its surroundings.
(5) The system released 244 kJ of energy, in which only 150 kJ went into the water, then the difference must be the work done by the system on its surroundings.
W = (244 - 150) kJ = 94 kJ
please answer's these scientist answer's
A scientist observes that the leg bones of cats are similar to the bones in the wings of bats. The scientist concludes the two species share a common ancestor. Which describes why the scientist drew that conclusion?
1. developmental patterns
2. DNA
3. fossil evidence
4 .structural data
Bald eagles might lay up to five eggs at a time, but only one hatchling usually survives. Which feature of natural selection is this an example of?
1 .adaptation
2. genetic variation
3. overproduction
4. selection
Why is NH3 not considered a base under the Arrhenius definition of acids and bases?
SELECT AN ANSWER
a. It does not react with acids.
b. NH3(aq) does not contain OH- ions.
c. NH3 is considered a base under the Arrhenius definition, but not under the Bronsted-Lowry definition.
d. It does not cause a color change when mixed with an acid-base (pH) indicator.
Answer:
b. NH3(aq) does not contain OH- ions.
Explanation:
According to Arrhenius in his definition, a base is a substance that has the ability to increase the hydroxyll ion (OH-) of an aqueous solution. In other words, Arrhenius bases dissociates into OH- when dissolved in water.
According to this question, ammonia (NH3) will not be considered an Arrhenius base because it does not contain OH-. This means that ammonia (NH3) cannot dissociate into hydroxyll ion when dissolved in water.
A study was created to test the effects of fear in children. The hypothesis of the experimenters was that if babies were exposed to fuzzy bunnies and at the same time a loud cymbal was struck close behind them, then that child would be afraid of all fuzzy things. Another group of children would be exposed to bunnies without any loud noises. The study was carried out as planned and as a result, hundreds of young children developed fear of all cute furry bunny rabbits.
Dependent Variable: ______________________
Control Group: ____________________________
Independent Variable: _____________________
Experimental Group: _______________________
Answer:
Dependent variable: the children's fear of rabbits
Control: the group that was NOT exposed to loud noises
Independent variable: the loud noises
Experimental Group: the group that was exposed to loud noises
Whats the name?!?!?!??!?!?!?!?!?!?!!?!?!?!??!?!?!?!
Part A. Classify each of these soluble solutes as a strong electrolyte, a weak electrolyte, or a nonelectrolyte. Solutes Formula Nitric acid HNO3 Potassium hydroxide KOH Formic acid HCOOH Ethyl amine CH3CH2NH2 Sodium bromide NaBr Butanol C4H9OH Sucrose C12H22O11
Part B. Enter a molecular equation for the reaction that occurs between aqueous HBr and aqueous LiOH.
Answer:
1. Strong electrolytes = Nitric acid HNO3,Potassium hydroxide KOH, Sodium bromide NaBr
Weak electrolytes = Formic acid HCOOH Ethyl amine CH3CH2NH2, Butanol C4H9OH
Non-electrolyte = Sucrose C12H22O11
2. The reaction between aqueous HBr and aqueous LiOH is shown innthe equation below:
HBr + LiOH ----> NaBr + H₂O
Explanation:
Electrolytes are substances that when in molten state or in aqueous solution dissociate into ions both positively-charged and negatively-charged ions known as actions and anions, which are then able conduct electricity.
Strong electrolytes are aqueous or molten solutions of compounds which ionize completely to produce anions and actions. Ionic compounds such as organic salts, acids and bases are strong electrolytes.
Weak electrolytes only ionize partially, that is, they produce few ions. Some organic salts, acids and bases are weak elctrolytes
From the compounds given above;
Strong electrolytes = Nitric acid HNO3,Potassium hydroxide KOH, Sodium bromide NaBr
Weak electrolytes = Formic acid HCOOH Ethyl amine CH3CH2NH2, Butanol C4H9OH
Non-electrolyte = Sucrose C12H22O11
2. The reaction between aqueous HBr and aqueous LiOH is shown innthe equation below:
HBr + LiOH ----> NaBr + H₂O
For each of the following, predict the complete, balanced chemical equation for the reaction that occurs when they are mixed. Make sure to label the states.
1. HNO3 & NaOH
2. Sr(OH)2 & HI
..
Answer:
1. The balanced chemical reaction is:
[tex]HNO_3(aq)+NaOH(aq)\rightarrow NaNO_3(aq)+H_2O(l)[/tex]
2. The balanced chemical reaction is:
[tex]2HI(aq)+Sr(OH)_2(aq)\rightarrow SrI_2(aq)+2H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reactions, it is necessary to keep in mind the cations and anions are switched around as a result of the bonds rearrangement in these neutralization reactions; therefore, we can proceed as follows:
1. The balanced chemical reaction is:
[tex]HNO_3(aq)+NaOH(aq)\rightarrow NaNO_3(aq)+H_2O(l)[/tex]
Because all atoms are in the same amount at each side of the equation and the resulting salt is soluble.
2. The balanced chemical reaction is:
[tex]2HI(aq)+Sr(OH)_2(aq)\rightarrow SrI_2(aq)+2H_2O(l)[/tex]
Because all atoms are in the same amount at each side of the equation and the resulting salt is soluble.
Best regards!
what is the xonclusion of separating acetone and water by simple and fractional distillation
Answer:
In conclusion, acetone was determined to be the unknown used in the simple distillation and acetone- water was separated successfully by fractional distillation. Introduction Distillation is the chief technique used to separate and purify liquids.
What is the pressure, in mmHg, of a 4.00 g sample of O2 gas, which has a temperature of 37.0 °C, and a volume of 4400 mL?
Answer:
549.48 mmHg
Explanation:
We'll begin by calculating the number of mole of oxygen in 4 g. This can be obtained as follow:
Molar mass of O₂ = 2 × 16 = 32 g/mol
Mass of O₂ = 4 g
Mole of O₂ =?
Mole = mass /molar mass
Mole of O₂ = 4/32
Mole of O₂ = 0.125 mole
Next, we shall convert 37.0 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
T (°C) = 37.0 °C
T(K) = 37.0 °C + 273
T(K) = 310 K
Next, we shall convert 4400 mL to L.
1000 mL = 1 L
Therefore,
4400 mL = 4400 mL × 1 L / 1000 mL
4400 mL = 4.4 L
Next, we shall determine the pressure. This can be obtained as follow:
Number of mole (n) = 0.125 mole
Temperature (T) = 310 K
Volume (V) = 4.4 L
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =?
PV = nRT
P × 4.4 = 0.125 × 0.0821 × 310
Divide both side by 4.4
P = (0.125 × 0.0821 × 310) / 4.4
P = 0.723 atm
Finally, we shall convert 0.723 atm to mmHg.
1 atm = 760 mmHg
Therefore,
0.723 atm = 0.723 atm × 760 mmHg / 1 atm
0.723 atm = 549.48 mmHg
Thus, the pressure is 549.48 mmHg
True or Fase. Every substance has to be classified as either acid or base?
Answer:
False
Explanation:
Some substances don't have to be
Which of the following apply to gases. Select all that apply.
Answer:
kindly give options
Explanation:
What is the formula of compound formed from a calcium ion and As? Express your answer as a chemical formula
Answer:
its chemical formula is Ca3N2
Explanation:
hope it will help
2 NaClO3→ 2 NaCl + 3 O2
How many moles of O2 are produced when 40g of NaCl are formed?
Answer:
75.6
Explanation:
An orgo lab student named Bob wanted to synthesize an isoamyl acetate ester because it smells like bananas and he really likes to sniff it. He heated 7.50 grams of isoamyl alcohol (3-methyl-1-butanol) with 22.5 grams of acetic acid (ethanoic acid) and 4.50 grams of sulfuric acidto prepare his favorite ester. Based on these numbers, how many grams of isoamyl acetateshould he theoretically obtain
Answer:
The answer is "11.07 g".
Explanation:
Isoamyl alcohol is a reagent restriction
Isoamyl alcohol Moles:
[tex]= \frac{7.5}{88.15} \\\\ =0.085[/tex]
Moles only with the shape of isoamyl acetate are equivalent to numbers.
Isoamyl acetate grams:
[tex]= 0.085 \times 130.19\\\\ = 11.07 \ g[/tex]
If carbon is in an animal is it:
A. Abiotic matter
B. Biotic matter
C. Energy storage molecules
D. Carbon dioxide
I WILL MARK BRAINLIEST IF YOU HELP!
Do not guess or give me a file or I will report you!!
Answer:
It is A
Explanation:
Abiotic matter
what changes would you see in the colour of litmus paper in lemon,ash and blood
Answer:
Colour of litmus papers in lemon:
Blue litmus- Red
Red litmus- No change
Really sorry but don't know about others
Litmus paper indicator shows following color changes for lemon it is, blue litmus to red, for ash and blood it is red litmus to blue indicating their acidic nature in case of lemon and alkaline nature in case of ash and blood.
What is an indicator?Indicator is defined as a chemical substance which is chemically a weak acid or a weak base which changes it's color depending upon the concentration of hydrogen ions present in the solution.They dissociate slightly in water to produce ions.
These are generally derived from plant pigments and are of slightly acidic or basic in nature.There are three types of indicators:
1) natural indicators
2) synthetic indicators
3) olfactory indicators.
These are mainly used in determination of end point of titrations. Every indicator has it's pH range in which it can perform effectively.These are usually organic compounds.
Learn more about indicators,here:
https://brainly.com/question/12489874
#SPJ2
what is your experience about water pollution
Answer:
water pollution is a process in which water gets polluted due to discharge of city sewage and industrial waste. I was suffering through the water born disease when I drank the contaminated water. The sources of water becomes dirty. It makes environment unbalanced. People suffer from different water born disease when they drink polluted water.
Plz I need helpppppp