Answer:
the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
Explanation:
Given;
diameter of the ceiling fan, d = 90 cm = 0.9 m
angular speed of the fan, ω = 64 rpm
time taken for the fan to stop, t = 28 s
The distance traveled by the ceiling fan when it comes to a stop is calculated as;
[tex]d = vt = \omega r\times t= ( \frac{64 \ rev}{\min} \times \frac{2 \pi \ rad}{rev} \times \frac{1 \min}{60 \ s} \times 0.9 \ m) \times 28 \ s\\\\d = 168.89 \ m[/tex]
The speed of the tip of a blade 10 s after the fan is turned off is calculated as;
[tex]v = \frac{d}{t} \\\\v = \frac{168.89}{10} \\\\v = 16.889 \ m/s[/tex]
Therefore, the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
A 41.0-kg crate, starting from rest, is pulled across level floor with a constant horizontal force of 135 N. For the first 15.0 m the floor is essentially frictionless, whereas for the next 12.0 m the coefficient of kinetic friction is 0.320. (a) Calculate the work done by all the forces acting on the crate, during the entire 27.0 m path. (b) Calculate the total work done by all the forces. (c) Calculate the final speed of the crate after being pulled these 27.0 m.
Answer:
Explanation:
From the information given;
mass of the crate m = 41 kg
constant horizontal force = 135 N
where;
[tex]s_1 = 15.0 \ m \\ \\ s_2 = 12.0 \ m[/tex]
coefficient of kinetic friction [tex]u_k[/tex] = 0.28
a)
To start with the work done by the applied force [tex](W_f)[/tex]
[tex]W_F = F\times (s_1 +s_2) \times cos(0) \ J[/tex]
[tex]W_F = 135 \times (12 +15) \times cos(0) \ J \\ \\ W_F = (135 \times 37 )J \\ \\ W_F =4995 \ J[/tex]
Work done by friction:
[tex]W_{ff} = -\mu\_k\times m \times g \times s_2 \\ \\ W_{ff} = -0.320 \times 41 \times 9.81 \times 12 \ J \\ \\ W_{ff} = -1544.49 \ J[/tex]
Work done by gravity:
[tex]W_g = mg \times (s_1+s_2) \times cos (90)} \ J \\ \\ W_g = 0 \ j[/tex]
Work done by normal force;
[tex]W_n = N \times (s_1 + s_2) \times cos (90) \ J[/tex]
[tex]W_n = 0 \ J[/tex]
b)
total work by all forces:
[tex]W = F \times (s_1 + s_2) + \mu_k \times m \times g \times s_2 \times 180 \\ \\ W = 135 \times (15+12) \ J - 0.320 \times 41 \times 9.81 \times 12[/tex]
W = 2100.5 J
c) By applying the work-energy theorem;
total work done = ΔK.E
[tex]W = \dfrac{1}{2}\times m \times (v^2 - u^2)[/tex]
[tex]2100.5 = 0.5 \times 41 \times v^2[/tex]
[tex]v^2 = \dfrac{2100.5}{ 0.5 \times 41 }[/tex]
[tex]v^2 = 102.46 \\ \\ v = \sqrt{102.46} \\ \\ \mathbf{v = 10.1 \ m/s}[/tex]
A ball is sitting at the top of a ramp. As the ball rolls down the ramp, the potential energy of the ball decreases, what happens to the potential energy as the ball moves
Answer:
the potential energy decreases as it is converted to kinetic energy.
Explanation:
As things move, their potential energy converts to kinetic energy to power them along. When a ball rolls down the top of a ramp, all the potential energy it accumulated at the top of the ramp converts to kinetic energy to help it roll down. In other words, its potential energy decreases as its kinetic energy increases.
TRUE OR FALSE
2 QUESTIONS
NEED HELP ASAP
THX :)
LOTS OF POINTS :>
Answer: Both False
Explanation:
Our Milky Way Galaxy is a spiral galaxy. Some spiral galaxies are what we call "barred spirals" because the central bulge looks elongated
Irregualuar glaxyices are all over the place
Rhodium is in period 5 of the periodic table. What does this tell you about this element
Answer:
. It is an extraordinarily rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.
Explanation:
Do blood cells have a nuclei? Describe the shape of blood platelets.
Answer: Mature red blood cells don't have nuclei.
Explanation: " Platelets are irregularly shaped, have no nucleus, and typically measure only 2–3 micrometers in diameter. "
Hope this Helps!!
A uniform-density 7 kg disk of radius 0.20 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 42 N through a distance of 0.9 m. Now what is the angular speed
Answer:
The angular speed is 23.24 rad/s.
Explanation:
Given;
mass of the disk, m = 7 kg
radius of the disk, r = 0.2 m
applied force, F = 42 N
distance moved by disk, d = 0.9 m
The torque experienced by the disk is calculated as follows;
τ = F x d = I x α
where;
I is the moment of inertia of the disk = ¹/₂mr²
α is the angular acceleration
F x r = ¹/₂mr² x α
The angular acceleration is calculated as;
[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]
The angular speed is determined by applying the following kinematic equation;
[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]
initial angular speed, ωi = 0
angular distance, θ = d/r = 0.9/0.2 = 4.5 rad
[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]
Therefore, the angular speed is 23.24 rad/s.
Which of these is the BEST answer for why science is important?
Science can take us to other planets, even if it’s only through a telescope.
Science is part of human nature; it helps answer questions about how the world works.
Science helps us learn to think more critically and weigh evidence better.
Science gives us better tablet computers and games.
QQQUUUUCCCKKKK!!!!!!
Car B is rounding the curve with a constant speed of 54 km/h, and car A is approaching car B in the intersection with a constant speed of 72 km/h. The x-y axes are attached to car B. The distance separating the two cars at the instant depicted is 40 m. Determine:
This question is incomplete, the complete question is;
Car B is rounding the curve with a constant speed of 54 km/h, and car A is approaching car B in the intersection with a constant speed of 72 km/h. The x-y axes are attached to car B. The distance separating the two cars at the instant depicted is 40 m. Determine: the angular velocity of Bxy rotating frame (ω).
Answer:
the angular velocity of Bxy rotating frame (ω) is 0.15 rad/s
Explanation:
Given the data in the question and image below and as illustrated in the second image;
distance S = 40 m
V[tex]_B[/tex] = 54 km/hr
V[tex]_A[/tex] = 72 km/hr
α = 100 m
now, angular velocity of Bxy will be;
ω[tex]_B[/tex] = V[tex]_B[/tex] / α
so, we substitute
ω[tex]_B[/tex] = ( 54 × 1000/3600) / 100
ω[tex]_B[/tex] = 15 / 100
ω[tex]_B[/tex] = 0.15 rad/s
Therefore, the angular velocity of Bxy rotating frame (ω) is 0.15 rad/s
(will give brainliest to whoever is correct and shows reasoning) What is the acceleration of an object that has a velocity of 60m/s and is moving in a circle of radius 50m?
Answer:
5.0/s
Explanation:
Answer:
b and a it is this that abewsr
an iron Tyre of diameter 50cm at 288k is to be shrank on to a wheel of diameter 50.35cm.To what temperature must the tyre be heated so that it will slip over the wheel with a radial gap of 0.5mm.Linear expansivity of iron is 0.000012k-1
Answer:
The answer should be D
Explanation:
A reaction occurs when a compound breaks down. This reaction has one reactant and two or more products. Energy, as from a battery, is usually needed to break the compound apart.
Answer:
decomposition
Explanation:
What is diffraction of light
Answer:
According to "http://ww2010.atmos.uiuc.edu" Diffraction is the slight bending of light as it passes around the edge of an object.
Some examples of Light Defraction would be..
-CD reflecting rainbow colours
-Sun appears red during sunset
-From the shadow of an object
Cells use nutrients and oxygen to supply the body with the energy it needs. What three-body systems are working together in this situation?
A
nervous, digestive, and circulatory systems
B
digestive, circulatory, and excretory systems
C
circulatory, immune, and respiratory systems
D
digestive, respiratory, and circulatory systems
Answer:
The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.
Explanation:
so the answer is D
discuss two reasons why people find transition between school and university
Answer:
Is that your answer
PLEASE HELP The United States spends over $20 billion a year on space exploration through NASA. Do you think that this has been worth the cost? In three to five sentences, provide two specific examples of things we have learned from space exploration, and explain how these examples influence your opinion.(4 points)
Answer: I think $20 billion a year it’s worth the cost. The reasoning behind that is because we can conduct research on various things that could help out humanity. Therefore we can conclude that’s spending billions of dollars every year is worth it.
Explanation:
Solve the below problems being sure to provide the correct significant figures.
1) 1000 ÷ 4.886 = __________
2) 240 ÷ 12.3 = __________
3) 80 x 4.6 = __________
4) 4.527 x 30 = __________
5) 86 x 63.855 x 8000 = __________
6) 700 x 91.186 = __________
7) 7.1 x 348 = __________
8) 50 ÷ 29.1 = __________
9) 98.773 x 24.891 x 409 = __________
10) 0.065 x 3 x 3007 = __________
Answer:
1) 204.6663938
2) 19.51219512
3) 368
4) 135.81
5) 43932240
6) 63830.2
7) 2470.8
8) 1.718213058
9) 1005550.526
10) 586.365
Most of the questions you asked were in repeating decimal form.
Explanation:
The average mean distance of Saturn from the sun is
Answer:
From an average distance of 886 million miles (1.4 billion kilometers), Saturn is 9.5 astronomical units away from the Sun. One astronomical unit (abbreviated as AU), is the distance from the Sun to Earth. From this distance, it takes sunlight 80 minutes to travel from the Sun to Saturn.
we have that from the Question"The average mean distance of Saturn from the sun is" it can be said that Tthe average mean distance of Saturn from the sun is
A distance of 1427 x 10^6 km or 886 696 691 milesFrom the Question we are told
The average mean distance of Saturn from the sun is
Generally
The Sun is the star of the milky way galaxy and its distance from every planet in the milky way determines in one way or another its properties and in-habitability
Saturn being a Planet of the milky way we see that Saturn is a significant distance away from sun
A distance of 1427 x 10^6 km or 886 696 691 miles
Therefore
The average mean distance of Saturn from the sun is
A distance of 1427 x 10^6 km or 886 696 691 miles
For more information on this visit
https://brainly.com/question/19007362?referrer=searchResults
Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.6-V battery, the current from the battery is 2.07 A. When the resistors are connected in parallel to the battery, the total current from the battery is 8.98 A. Determine R1 and R2. (Enter your answers from smallest to largest.)
Answer:
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
Explanation:
We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.
Formula for resistance is;
R = V/I
R = 12.6/2.07
R = 6.087 ohms
Since R1 and R2 are connected in series.
Thus; R1 + R2 = 6.087 ohms
R1 = 6.087 - R2
We are also told that when they are connected in parallel, the current is 8.98 A.
Thus, R = 12/8.98
R = 1.403 ohms
Thus;
(1/R1) + (1/R2) = 1/1.403
Let's put 6.087 - R2 for R1;
(1/(6.087 - R2)) + (1/R2) = 1/1.403
Multiply through by 1.403R2(6.087 - R2) to get;
1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)
Expanding gives;
1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²
(R2)² - 6.087R2 + 8.54 = 0
Using quadratic formula, we have;
R2 = 2.193 ohms or 3.894 ohms
Thus,
R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894
R1 = 3.894 or 2.193
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.
Answer:
B. in the direction of the force
Explanation:
Sana nakatulong
On a cold winter day, a steel metal fence post feels colder than a wooden fence post of identical size because: a. The specific heat capacity of steel is higher than the specific heat capacity of wood. b. The specific heat capacity of steel is lower than the specific heat capacity of wood. c. Steel has the ability to resist a temperature change better than wood. d. The mass of steel is less than wood so it loses heat faster. Selected:e. Two of the above statements are true.
Answer:
The specific heat capacity of steel is lower than the specific heat capacity of wood
Explanation:
THERE IS ONLY 1 ON MY assignment i geot dis right please brainlyist
The specific heat capacity of steel is lower than the specific heat of a piece of wood. Therefore, option (2) is correct.
What is the specific heat capacity?Specific heat can be defined as the heat energy required to change the temperature of one unit mass of a substance of a constant volume by 1 °C. The S.I. unit of the specific heat capacity of a material is KJ/Kg.
The thermal capacity of a material is defined as a physical property of a substance. The amount of heat is given to a given mass to create a change in unit temperature.
The mathematical expression of specific heat capacity can be written as :
Q = m C ΔT Where C is the heat capacity.
The specific heat capacity is an intensive property of a substance as it does not depend upon the size of the material.
A steel metal fence post feels colder than a wooden fence post of similar size because the specific heat of steel is lower than the specific heat capacity of wood.
Learn more about specific heat, here:
brainly.com/question/11297584
#SPJ5
5.
2075 Set A Q.No. 20 2070 Supp. Set B Q.No. 2 B What
happens to the kinetic energy of photo electrons when
intensity of light is doubled?
[2]
Answer:
The energy of each photon can be transformed into kinetic energy and as this energy does not change, the energy of both photoelectrons remains constant,
Explanation:
The photoelectric effect was explained by Einstein, who assumed that the lz is made up of particles called photons each of a given energy, therefore the photoelectric effect can be explained as a collision of particles.
From this explanation we see that the intensity is proportional to the number of existing particles, when we double the intensity we double the number of particles, but the energy of each particle does not change, therefore if we use the conservation of energy.
The energy of each photon can be transformed into kinetic energy and as this energy does not change, the energy of both photoelectrons remains constant, only the number of electrons expelled changes.
When grip strength increases:
a. action potential voltage increases.
b. action potential frequency decreases.
c. action potential frequency increases.
d. action potential frequency increases.
e. the number of active motor units increases.
Answer:
e. the number of active motor units increases.
Explanation:
There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.
Which of the following is generally true for people in their old age?
Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.
Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.
How does the REE change as a person ages?
Explain
I go to k12 too and i am writing this test now too. I am like pretty sure my answer is correct. I guess we can kinda help eachother with this assignment cuz i am sorta stuck too.
The older a person gets, the greater REE he has.I dont know i hope this helped a bit I know its not much i need help with this too.
What would happen if the molecules in a sample moving entirely ?
Answer:
Molecular scale. The story begins a long time ago
when the idea that molecules are in constant motion
was first discovered. Part of the evidence that you can
see in everyday life was discovered by Robert Brown
about 150 years ago when he used a microscope to
watch how tiny dust particles move.
So how fast do molecules move? It all depends upon
the molecule and its state: molecules in a solid state
move slower than in a liquid state, and much slower
than gas molecules. One estimate puts gas molecules
in the range of 1,100 mph at room temperature. Cool
them down to almost absolute zero and they slow
down to less than 0.1 mph (slower than the average
couch potato). The fact that they are always moving
makes it a challenge to see molecules and make stuff
out of them, but it’s a challenge that scientists
work hard to figure out.
Explanation:
Calculate the first and second order angles for light of wavelength 400. nm and 700. nm of the grating contains 1.00 x 104 lines/cm.
Answer:
[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]
[tex]44.43^{\circ}[/tex], second order does not exist
Explanation:
n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]
[tex]\lambda[/tex] = Wavelength
m = Order
Distance between slits is given by
[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]
[tex]\lambda=400\ \text{nm}[/tex]
m = 1
We have the relation
[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]
The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].
[tex]\lambda=700\ \text{nm}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]
Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.
The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].
Second order angle does not exist.
If you push with a power of 20 Watts
on a 150 Newton object, how long would
it take to push it over the 4.3 m?
Answer:
32.25 s
Explanation:
From the question,
P = W/t.............. Equation 1
Where P = Power, W = work done, t = time.
But
W = F×d................. Equation 2
Where F = force and d = distance
Substitute equation 2 into equation 1
P = F×d/t............... Equation 3
make t the subject of euqation 3
t = (F×d)/P............. Equation 4
Givn: F = 150 N, d = 4.3 m, P = 20 watts.
Substitute these values into equation 4
t = (150×4.3)/20
t = 32.25 s
A motorcycle is traveling along a highway at 29 m/s. How far does the motorcycle travel in 18 s?
Answer:
the motorcycle travels 522 miles in 18 seconds Explanation: 29 x 18 is 522 I'm pretty sure that's what it was asking but I don't know
HELP DUE TODAY BEST ANSWER GET BRAINLIE
One of the greatest dangers in a tornado is from flying objects. A 15 pound piece of lumber can turn into a flying missile that could severely damage walls and homes. A piece of steel with a mass of 200 pounds and travelling at the same velocity would cause even more damage. Select any evidence from the list below that you could use to explain why a 200 pound piece of steel would cause more damage than a 15 pound piece of wood travelling at the same velocity.
As the kinetic energy of an object increases, the force it can exert on another object decreases.
As the kinetic energy of an object increases, the force it can exert on another object increases.
Objects with more mass have less kinetic energy.
Objects with more mass have more kinetic energy.
As the velocity of an object increases, its kinetic energy decreases.
As the velocity of an object increases, its kinetic energy increases.
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
(will give brainliest to whoever is first and gives reason) A mass is spun in a circle with a frequency of 40Hz. What is the period of its rotation?
Answer:
[tex]\huge\boxed{T = 0.025\ seconds}[/tex]
Explanation:
Given:
Frequency = f = 40 Hz
Required:
Time period = T = ?
Formula:
[tex]\sf T = 1 / f[/tex]
Solution:
T = 1 / 40
T = 0.025 seconds
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807