A 500 kg motorcycle accelerates at a rate of 2 m/s .how much force was applied to the motorcycle?

Answer:

724.3J/Kg.K

Explanation:

CHECK THE COMPLETE QUESTION BELOW

Compute the specific heat capacity at constant volume of nitrogen (N2) gas.and compare with specific heat of liquid water. The molar mass of N2 is 28.0 g/mol.

The specific heat capacity can be computed by using expression below

c= CV/M

Where c= specific heat capacity

M= molar mass

CV= molar hear capacity

Nitrogen is a diatomic element, the Cv can be related to gas constant with 5/2R

Where R= 8.314J/mol.k

Molar mass= 28 ×10^-3Kg/mol

If we substitute to the expression, we have

c= (5R/2)/(M)

=5R/2 × 1/M

=(5×8.314) /(2×28 ×10^-3)

=724.3J/Kg.K

Hence, the specific heat capacity at constant volume of nitrogen (N2) gas is

724.3J/Kg.K

The specific heat of liquid water is about 4182 J/(K kg) which is among substance with high specific heat, therefore specific heat of Nitrogen gas is 724.3J/Kg.K which is low compare to that of liquid water.

Answer:

The positions are  0.0194 m  and - 0.0194 m.

Explanation:

Given;

amplitude of the simple harmonic motion, A = 2.0 cm = 0.02 m

speed of simple harmonic motion is given as;

[tex]v = \omega \sqrt{A^2-x^2}[/tex]

the maximum speed of the simple harmonic motion is given as;

[tex]v_{max} = \omega A[/tex]

when the speed equal one fourth of its maximum speed

[tex]v =\frac{v_{max}}{4}[/tex]

[tex]\omega\sqrt{A^2-x^2} = \frac{\omega A}{4} \\\\\sqrt{A^2-x^2}= \frac{A}{4}\\\\A^2-x^2 = \frac{A^2}{16} \\\\x^2 = A^2 - \frac{A^2}{16} \\\\x^2 = \frac{16A^2 - A^2}{16} \\\\x^2 = \frac{15A^2}{16} \\\\x= \sqrt{\frac{15A^2}{16} } \\\\x = \sqrt{\frac{15(0.02)^2}{16} }\\\\x = 0.0194 \ m \ \ or\ - 0.0194 \ m[/tex]

Thus, the positions are  0.0194 m and - 0.0194 m.

The positions where the speed equals 1/4 of its maximum speed is mathematically given as

[tex]x \pm 0.0194[/tex]

Question Parameters:

an amplitude of 2.00 cm.

Generally, the equation for the speed of simple harmonic motion  is mathematically given as

[tex]v = w \sqrt{A^2-x^2}\\\\v=\frac{wA}{4}[/tex]

Therefore

[tex]w \sqrt{A^2-x^2}=\frac{wA}{4}\\\\x^2=A^2-A^2/16\\\\x=\sqrt{\frac{15A^2}{16}}[/tex]

[tex]x \pm 0.0194[/tex]

In conclusion, the positions are

[tex]x \pm 0.0194[/tex]

Read more about Speed

https://brainly.com/question/4931057

Answer:

its D: A frozen lake melts under the sun.

Explanation:

Radiation is the transfer of heat energy through space by electromagnetic radiation. Most of the electromagnetic radiation that comes to the earth from the sun is invisible. Only a small portion comes as visible light. Light is made of waves of different frequencies.

Answer:

diverging lens

Explanation:

Since the nature of the problem of nearsightedness is that the light is focused in front of the retina, a diverging lens will serve to diverge light before it reaches the eye. This light will then be converged by the cornea and lens to produce an image on the retina.

Answer: Plates shifting

Explanation: After years and years of plates colliding into solid rock, they slowly become closer together. As recent studies have shown, Africa is currently moving closer to Europe one centimeter every year (one inch every 2.5 years).

Answer:

nvudbwasivnjlscv bwbfvsz

Explanation:

Not my answer but nevertheless

Answer:

Electric potential develops in primary/dry cells through a chemical reaction between the cell plates of the cell. free electrons move from the zinc plate to the copper plate through a conducting material.  

Electric potential develops in Generators via magnetic induction i.e. the movement of a conducting rod through the magnetic field between the poles of the horseshoe magnets produces Electric potential in Generators.

Electric potential develops in thermocouples via heat transfer ; A heat source is applied to the connecting end of the thermocouple strips and this will cause the production electric charges ( potential ) at the free ends

3) Identifying effect of each scenerio

a) The resistance of an electric current will increase when the length of the conductor increases

b) The resistance of an electric current through a body will decrease when the conductor has a larger cross-section

c) The resistance of an electric current through a body will decrease when the temperature of the conductor is cooled

4) The amount of heat lost as heat in Btu = 2.73 Btu

amount of heat lost = 0.8 Wh

convert to Btu = 0.8 Wh / 0.293 = 2.73 Btu   ( note : 1 Btu = 0.293 Wh )

5) The amount of of energy used by a 40 W bulb for 365 days = 146 kWh

Power of bulb = 40 W

Run time = 10 hours * 365 days

∴ amount of energy used = 3650 * 40 = 146 * 10^3 Wh = 146 kWh

Answer:

The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].

Explanation:

Vectorially speaking, the center of gravity with respect to origin ([tex]\vec r_{cg}[/tex]), measured in meters, is defined by the following formula:

[tex]\vec r_{cg} = \frac{m_{1}\cdot \vec r_{1}+m_{2}\cdot \vec r_{2}+m_{3}\cdot \vec r_{3}+m_{4}\cdot \vec r_{4}}{m_{1}+m_{2}+m_{3}+m_{4}}[/tex] (1)

Where:

[tex]m_{1}[/tex], [tex]m_{2}[/tex], [tex]m_{3}[/tex], [tex]m_{4}[/tex] - Masses of the objects, measured in kilograms.

[tex]\vec r_{1}[/tex], [tex]\vec r_{2}[/tex], [tex]\vec r_{3}[/tex], [tex]\vec r_{4}[/tex] - Location of the center of mass of each object with respect to origin, measured in meters.

If we know that [tex]\vec r_{cg} = (0,0)\,[m][/tex], [tex]\vec r_{1} = (0,0)\,[m][/tex], [tex]\vec r_{2} = (0, 4.1)\,[m][/tex], [tex]\vec r_{3} = (1.9,0.0)\,[m][/tex], [tex]m_{1} = 6\,kg[/tex], [tex]m_{2} = 1.5\,kg[/tex], [tex]m_{3} = 4\,kg[/tex] and [tex]m_{4} = 7.9\,kg[/tex], then the equation is reduced into this:

[tex](0,0) = \frac{(6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4.0\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4}}{6\,kg+1.5\,kg+4\,kg+7.9\,kg}[/tex]

[tex](6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4} = (0,0)\,[kg\cdot m][/tex]

[tex](7.9\,kg)\cdot \vec r_{4} = -(6\,kg)\cdot (0,0)\,[m]-(1.5\,kg)\cdot (0,4.1)\,[m]-(4\,kg)\cdot (1.9,0)\,[m][/tex]

[tex]\vec r_{4} = -0.759\cdot (0,0)\,[m]-0.190\cdot (0,4.1)\,[m]-0.506\cdot (1.9,0)\,[m][/tex]

[tex]\vec r_{4} = (0, 0)\,[m] -(0, 0.779)\,[m]-(0.961,0)\,[m][/tex]

[tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex]

The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].

Answer:

O A. Freudian concepts

Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality. He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

Explanation:

Hope this helped!

O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

One of the case studies most closely linked with the Austrian psychotherapist Sigmund Freud is the hysterics and treatment of Anna O.

Despite the fact that Freud is intimately identified with Anna O, it is thought that he never actually treated her; instead, Breuer saw the patient.

Therefore, O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

To learn more Psychology, refer to the link:

https://brainly.com/question/29436774

#SPJ5

Answer:

L’énergie solaire récolte l’énergie radiante portée par la lumière de notre soleil en la convertissant en électricité.Biomasse des plantes. Les plantes sont capables d’exploiter et d’utiliser l’énergie lumineuse dans un processus appelé photosynthèse.

Answer:

Radiant energy, light energy, and solar energy are related because The Sun produces a lot of radiant energy that is transmitted to Earth as light. Plants convert the electromagnetic energy in sunlight into chemical energy for their food, through a process called photosynthesis. Waves of radiant electromagnetic energy can be visible or invisible.

Explanation:

Complete Question

a car traveling at 28.4 m/s undergoes a constant deceleration of 1.92 m/s2 when the breaks are applied. How many revolutions does each tire make before the car comes to a stop? Assume that the car does not skid and that each tire has a radius of 0.307 m. Answer in units of rev.

Answer:

The value is  [tex]N = 109 \ rev[/tex]      

Explanation:

From the question we are told that

    The speed of the car is  [tex]u = 28.4 \ m/s[/tex]

     The constant deceleration experienced is  [tex]a = 1.92 \ m/s^2[/tex]

      The radius of the tire is  [tex]r = 0.307 \ m[/tex]

Generally from kinematic equation we have that

      [tex]v^2 = u^2 + 2as[/tex]

Here  v is the final velocity which is  0 m/s

   So

         [tex]0^2 = 28.4^2 + 2 * 1.92 * s[/tex]

=>      [tex]s = 210.04 \ m[/tex]

Generally the circumference of the tire is mathematically represented as

         [tex]C = 2 \pi r[/tex]

=>      [tex]C = 2 * 3.142 * 0.307[/tex]    

=>      [tex]C = 1.929 \ m[/tex]

Generally the number of revolution is mathematically represented as

         [tex]N = \frac{ s}{C}[/tex]    

=>     [tex]N = \frac{210.04}{1.929}[/tex]

=>     [tex]N = 109 \ rev[/tex]      

Answer:

Answer:

25

Explanation:

Answer:

That is false. Take a look at this way. You can push a ball with your own breath, you just need to blow it. And you can pull something from afar with a magnet. It is possible to do both.

Explanation:

Not all physical things can be done only physically. Like I just said, it is possible to use other forces (no, not the dark side one),  such as a magnetic force, displayed by a magnet or anything with a force like so.

Answer:

Fx = 467.65N

Fy = 270N

Explanation:

Given

Force = 540N

angle of inclination = 40 degree

Horizontal component Fx = Fcos 30

Fx = 540cos30

Fx = 540(0.8660)

Fx = 467.65N

Hence the horizontal component is 467.65N

Vertical component Fy = Fsin 30

Fy = 540sin30

Fy = 540(0.5)

Fy = 270N

Hence the vertical component is 270N

Absolute zero, technically known as zero kelvins, equals −273.15 degrees Celsius, or -459.67 Fahrenheit, and marks the spot on the thermometer where a system reaches its lowest possible energy, or thermal motion.

Answer:

a) [tex]H_{in}=39.34 kJ[/tex]

b) Efficiency=76.77%

Explanation:

a)

In order to solve this problem, we can use the following formula:

[tex]H_{in}=H_{out}+W[/tex]

the problem provides us with all the necessary information so we can directly use the formula:

[tex]H_{in}=9.14kJ+30.2kJ[/tex]

[tex]H_{in}=39.34 kJ[/tex]

b) In order to find the efficiency, we can use the following formula:

[tex]Efficiency=\frac{W}{H_{in}}*100\%[/tex]

so we get:

[tex]Efficiency=\frac{30.2kJ}{39.34kJ}*100\%[/tex]

Efficiency=76.77%

Answer:

The answer is 493.05kJ

Explanation:

given

mass m= 3kg

t1=  10°C

t2= 60°C

Specific heat capacity of ham =3287 cal/kgºC

Required,

The quantity of heat, Q

Step two:

the formula is

Q= mcΔT

substitute

Q= 3*3287(60-10)

Q=9861*50

Q=493050 J

Q= 493.05kJ

Answer:

i don't know the correct answer

but this is what i found on web

Explanation:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. Processes involved in changes of state include melting, freezing, sublimation, deposition, condensation, and evaporation. Energy is always involved in changes of state.

Answer: Plant A

Explanation: The control group is participants who do not receive the experimental treatment.

Answer:

Explanation:

Position of n the order fringe = n λ D / d

for n = 2

position = 2 λ D / d

λ = 710 nm , D = 1.1 m

d = .65 x 10⁻³

position 1 = 2 x 710 x 10⁻⁹ x 1.1 / .65 x 10⁻³

= 2403.07 x 10⁻⁶ m

= 2.403 x 10⁻³ m

= 2.403 mm .

For λ = 655 nm

position = 2 λ D / d

λ = 655 nm , D = 1.1 m

d = .65 x 10⁻³

position 2 = 2 x 655 x 10⁻⁹ x 1.1 / .65 x 10⁻³

= 2216.91 x 10⁻⁶ m

= 2.217 x 10⁻³ m

= 2.217 mm .

Difference between their position

= 2.403 - 2.217 = .186 mm .

Answer:

Sensitivity of biosensor

The biosensor showed good linear correlation in the wide detection range of 0.001–2000 ng/mL with good sensitivity. In addition, it retained its biosensing property for seven days with high reproducibility

Explanation:

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 6 × 4

We have the final answer as

Hope this helps you

[tex]{\mathfrak{\underline{\purple{\:\:\: Given:-\:\:\:}}}} \\ \\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Mass \ of \ the \ body \ (m) = 40 \ kg}[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Final \ velocity \ of \ the \ body \ (v) = 20 \ m/s}[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Initial \ velocity \ of \ the \ body \ (u) = 0}[/tex]

[tex]\\[/tex]

[tex]{\mathfrak{\underline{\purple{\:\:\:To \:Find:-\:\:\:}}}} \\ \\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Force \ exerted \ by \ the \ body \ ( F)}[/tex]

[tex]\\[/tex]

[tex]{\mathfrak{\underline{\purple{\:\:\: Solution:-\:\:\:}}}} \\ \\[/tex]

☯ Using 1st equation of motion

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{v = u + at}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{20 = 0 + a(4)}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{20 = 4a}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{\dfrac{\cancel{20}}{\cancel{4}} = a}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{a = 5}[/tex]

[tex]\\[/tex]

☯ Now, Finding the force exerted

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{F = ma}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{F = 40 \times 5}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{F = 200 \ N}[/tex]

[tex]\\[/tex]

☯ Hence, [tex]\\[/tex]

[tex]\:\:\:\:\star\:\:\:\sf{The \ force \ exerted \ by \ the \ body \ is \ 200N}[/tex]

Answer:

m = 80[kg]

Explanation:

The kinetic energy can be calculated by means of the following equation.

[tex]E_{k}=\frac{1}{2}*m*v^{2}[/tex]

where:

m = mass [kg]

v = velocity = 5 [m/s]

Ek = kinetic energy = 1000 [J]

Now replacing:

[tex]1000 = \frac{1}{2} *m*5^{2}\\2000 = 25*m\\m=80[kg][/tex]

The mass of a ball will be "80 kg".

According to the question,

Kinetic energy, [tex]E_k[/tex] = 1000 Joules

Velocity, V = 5 m/s

As we know the formula,

→ Kinetic energy = [tex]\frac{1}{2}[/tex] × mass × (velocity)²

→      [tex]E_k = \frac{1}{2}[/tex] × m × v²

By substituting the values,

     [tex]1000= \frac{1}{2}\times m\times (5)^2[/tex]

[tex]1000\times 2=25\times m[/tex]      

     [tex]2000=25\times m[/tex]

         [tex]m = \frac{2000}{25}[/tex]

             [tex]= 80[/tex] kg

Thus the above answer is correct.

Find out more information about kinetic energy here:

https://brainly.com/question/25959744

Answer:

v = 5.34[m/s]

Explanation:

In order to solve this problem, we must use the theorem of work and energy conservation. This theorem tells us that the sum of the mechanical energy in the initial state plus the work on or performed by a body must be equal to the mechanical energy in the final state.

Mechanical energy is defined as the sum of energies, kinetic, potential, and elastic.

E₁ = mechanical energy at initial state [J]

[tex]E_{1}=E_{pot}+E_{kin}+E_{elas}\\[/tex]

In the initial state, we only have kinetic energy, potential energy is not had since the reference point is taken below 1.5[m], and the reference point is taken as potential energy equal to zero.

In the final state, you have kinetic energy and potential since the car has climbed 1.5[m] of the hill. Elastic energy is not available since there are no springs.

E₂ = mechanical energy at final state [J]

[tex]E_{2}=E_{kin}+E_{pot}[/tex]

Now we can use the first statement to get the first equation:

[tex]E_{1}+W_{1-2}=E_{2}[/tex]

where:

W₁₋₂ = work from the state 1 to 2.

[tex]E_{k}=\frac{1}{2} *m*v^{2} \\[/tex]

[tex]E_{pot}=m*g*h[/tex]

where:

h = elevation = 1.5 [m]

g = gravity acceleration = 9.81 [m/s²]

[tex]70 - 12 = \frac{1}{2}*2*v^{2}+2*9.81*1.5[/tex]

[tex]58 = v^{2} +29.43\\v^{2} =28.57\\v=\sqrt{28.57}\\v=5.34[m/s][/tex]

Answer:

False

Explanation:

Answer:

False because cells depend on the others and absolutely positively CANNOT work alone.

Explanation: