Answer:
The concentration of the original KOH solution is 0.1212 M.
Explanation:
Dilution is the process to reduce the concentration of solute in solution. This is accomplished by adding more solvent to the same amount of solute. In other words, dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one, and it simply consists of adding solvent to an existing solution.
As only solvent is being added, the consequence is that by not increasing the amount of solute, but if the amount of solvent, the concentration of the solute decreases.
The expression for the dilution calculation is:
Ci* Vi = Cf* Vf
where:
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case:
Ci= ? Vi: 25 mL Cf: 0.1 M Vf: 30.3 mLReplacing:
Ci* 25 mL= 0.1 M* 30.3 mL
Solving:
[tex]Ci=\frac{0.1 M*30.3 mL}{25 mL}[/tex]
Ci=0.1212 M
The concentration of the original KOH solution is 0.1212 M.
A 25.0 L tank of nitrogen gas is at 25 oC and 2.05 atm . If the temperature stays at 25 oC and the volume is decreased to 14.5 L , what is the new pressure?
Answer:
[tex]\boxed {\boxed {\sf P_2 \approx 3.53 \ atm}}[/tex]
Explanation:
In this problem, the temperature stays constant. The volume and pressure change, so we use Boyle's Law. This states that the pressure of a gas is inversely proportional to the volume. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
Now we can substitute any known values into the formula.
Originally, the gas has a volume of 25.0 liters and a pressure of 2.05 atmospheres.
[tex]25.0 \ L * 2.05 \ atm = P_2V_2[/tex]
The volume is decreased to 14.5 liters, but the pressure is unknown.
[tex]25.0 \ L * 2.05 \ atm = P_2 * 14.5 \ L[/tex]
Since we are solving for the new pressure, or P₂, we must isolate the variable. It is being multiplied by 14.5 liters and the inverse of multiplication is division. Divide both sides by 14.5 L .
[tex]\frac {25.0 \ L * 2.05 \ atm }{14.5 \ L}=\frac{P_2 *14.5 \ L}{14.5 \ L}[/tex]
[tex]\frac {25.0 \ L * 2.05 \ atm }{14.5 \ L}= P_2[/tex]
The units of liters cancel.
[tex]\frac {25.0 * 2.05 \ atm }{14.5 }=P_2[/tex]
[tex]\frac {50.25\ atm }{14.5 }=P_2[/tex]
[tex]3.53448276 \ atm = P_2[/tex]
The original values of volume and pressure have 3 significant figures, so our answer must have the same.
For the number we found, that is the hundredth place.
3.53448276The 4 in the thousandth place (in bold above) tells us to leave the 3 in the hundredth place.
[tex]3.53 \ atm \approx P_2[/tex]
The new pressure is approximately 3.53 atmospheres.
When maganese dioxide is added to hydrogen chloride you get water maganese dichloride and chlorine gas write the balanved equation
Answer: When maganese dioxide is added to hydrogen chloride you get water maganese dichloride and chlorine gas then balanced equation is [tex]MnO_{2} + 4HCl \rightarrow 2H_{2}O + MnCl_{2} + Cl_{2}[/tex].
Explanation:
The word equation is given as maganese dioxide is added to hydrogen chloride you get water maganese dichloride and chlorine gas.
Now, in terms of chemical formulae this reaction equation will be as follows.
[tex]MnO_{2} + HCl \rightarrow H_{2}O + MnCl_{2} + Cl_{2}[/tex]
Here, number of atoms on reactant side are as follows.
Mn = 1O = 2H = 1Cl = 1Number of atoms on product side are as follows.
Mn = 1O = 1H = 2Cl = 4To balance this equation, multiply HCl by 4 on reactant side and multiply [tex]H_{2}O[/tex] by 2 on product side. Therefore, the equation can be rewritten as follows.
[tex]MnO_{2} + 4HCl \rightarrow 2H_{2}O + MnCl_{2} + Cl_{2}[/tex]
Hence, number of atoms on reactant side are as follows.
Mn = 1O = 2H = 4Cl = 4Number of atoms on product side are as follows.
Mn = 1O = 2H = 4Cl = 4Since, this equation contains same number of atoms on both reactant and product side. Therefore, this equation is now balanced equation.
Thus, we can conclude that when maganese dioxide is added to hydrogen chloride you get water maganese dichloride and chlorine gas then balanced equation is [tex]MnO_{2} + 4HCl \rightarrow 2H_{2}O + MnCl_{2} + Cl_{2}[/tex].
can someone answer dis:
1) The atomic number of an element shows how many ___________ there are in its atoms.
thankss
I think that the answer is protons
PLS HELP ON A TIMER!
if the pressure exerted by a sample of carbon dioxide at 25° C in a volume of 0.44L is 3.81 atm, what is the mass of the carbon dioxide?
A. .0685
B. 1.65
C. 3.02
D. 14.4
Answer:
3.02
Explanation:
balance FeCl3 + MgO ---> Fe2O3 + MgCl2
Answer: The balanced equation is [tex]2FeCl_{3} + 3MgO \rightarrow Fe_{2}O_{3} + 3MgCl_{2}[/tex]
Explanation:
The given reaction equation is as follows.
[tex]FeCl_{3} + MgO \rightarrow Fe_{2}O_{3} + MgCl_{2}[/tex]
Here, number of atoms present on reactant side are as follows.
Fe = 1Cl = 3Mg = 1O = 1Number of atoms on product side are as follows.
Fe = 2Cl = 2Mg = 1O = 3To balance this equation, multiply [tex]FeCl_{3}[/tex] by 2 and MgO by 3 on reactant side. Also, multiply [tex]MgCl_{2}[/tex] by 3 on product side. Therefore, the equation can be rewritten as follows.
[tex]2FeCl_{3} + 3MgO \rightarrow Fe_{2}O_{3} + 3MgCl_{2}[/tex]
Hence, number of atoms on reactant side are as follows.
Fe = 2Cl = 6Mg = 3O = 3Number of atoms on product side are as follows.
Fe = 2Cl = 6Mg = 3O = 3Since, this equation contains same number of atoms on both reactant and product side. Therefore, this equation is now balanced equation.
Thus, we can conclude that the balanced equation is [tex]2FeCl_{3} + 3MgO \rightarrow Fe_{2}O_{3} + 3MgCl_{2}[/tex].
HELP ME PLEASEEEEE its chem
1. The thermal waters of a spring have a hydronium ion (H3O+) concentration of 2.00 x 10-6 M. Calculate the pH of the water.
2. Acetic acid (CH3COOH) is one of the simplest carboxylic acids. It is an important chemical reagent and industrial chemical. Vinegar is dilute acetic acid, often produced by fermentation. The following is a reversible reaction:
CH3COOH ↔ H+ + CH3COO–
• Write the set up you would use to calculate the Ka of this reaction.
• Calculate the hydrogen ion concentration [H+] of a 0.1 M solution of acetic acid given that the dissociation constant of acetic acid is Ka = 1.8 x10–5. Work must be shown to earn credit.
3. Describe the reaction of a strong acid and a weak base. In general, what will the final pH be when the reaction between equal moles of a weak acid and a strong base is complete? Explain your answer.
Answer:The thermal waters of a spring have a hydronium ion (H3O+) concentration of 2.00 x . 2. Acetic acid (CH3COOH) is one of the simplest carboxylic acids. It is an important chemical reagent and industrial chemical.Have a hydronium ion (H3O+) concentration of 2.00 x 10-6 M. Calculate the pH of the water.
Explanation: The thermal waters of a spring have a hydronium ion (H3O+) concentration of 2. spring have a hydronium ion (H3O+) concentration of 2.00 x 10-6 M. Calculate the pH of the water. 2. Acetic acid (CH3COOH) is one of the simplest carboxylic acids. It is an important chemical reagent and industrial chemical.
Are elements and compounds the same thing?
Answer:
no
Explanation:
a compound is a mixture of two or more elements while a element is by itself.
Answer:
no
Explanation:
elements are their purest form. compunds are a mix of mutiple elements.
1. Observa y completa los neutrones se encuentran ----------------- A. Girando alrededor d las orbitas B. Fuera del nucleo C. En las orbitas del nucleo D. Dentro del nucleo
Answer:
Los neutrones se encuentran dentro del núcleo.
Explanation:
Un átomo es la parte más pequeña de materia que puede combinarse químicamente con otro y mantiene todas las propiedades de un elemento.
Los átomos se combinan para formar moléculas que luego interactúan para formar sólidos, líquidos y gases.
Su estructura está compuesta por diferentes combinaciones de tres sub-partículas: los neutrones, los protones y los electrones. A su vez posee dos regiones diferentes: el núcleo, donde están los protones y los neutrones, y la nube u orbitales electrónicos, donde se encuentran los electrones.
Entonces, los neutrones se encuentran dentro del núcleo.
Help me Look at the pictures!!!! Past due!
Make an explanation of how my hypothesis is not supported.
Answer:
Explanation:
the temperture of the warmer water will make it have more space and have less density in the water.
Which model illustrates a compound A, b, c, d,
Answer: C
Explanation: I have the same question, it’s for summit, my teacher helped me with this question :)
Help help help I will give brainliest
Answer:
its b alkyne
Explanation:
brinliest po plsss
Answer:
Alkyne so its b
What happens to water molecules when a large quantity of thermal energy is added to water in the liquid state?
Answer:
The molecules gain kinetic energy, more farther apart, and become a gas.
Explanation:
Answer:
Explanation:
Continued heating of liquid water causes the molecules to vibrate even faster, steadily raising the temperature, Freezing When liquid water freezes, it releases thermal energy and turns into the solid-state, ice.
A gas is confined in a cylinder fitted with a movable piston. At 27ºC, the gas occupies a volume of 2.0 L under a pressure of 3.0 atm. The gas is heated to 47ºC and compressed to 5.0 atm. What volume does the gas occupy in its final state?
A: 0.78 L
B:1.3 L
C:2.1 L
D:0.48 L
The volume of the gas is 1.27 L at a temperature is 47°C and the pressure is 5.0 atm. Therefore, option (B) is correct.
What is the ideal gas equation?The ideal gas equation is described as the equation of the state of a perfect gas. The ideal gas equation is the product of the pressure and volume of one-mole gas is equal to the multiplication of the absolute temperature and gas constant.
The mathematical equation for a perfect gas is as follows:
PV = nRT
where n is the moles of an ideal gas, P is the pressure of the gas, V is the volume, and R is the universal gas constant.
Given, the initial volume of the gas, V₁ = 2.0 L
The initial temperature of the gas, T₁ = 27° C = 300.15 K
The initial pressure of the gas, P₁ = 3.0 atm
The final temperature of the gas, T₂ = 47° C = 320.15 K
The initial pressure of the gas, P₂ = 5.0 atm
We know that for an ideal gas:
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
[tex]V_2= \frac{3.0\times2.0\times320.15}{5.0\times 300.15}[/tex]
[tex]V_2= 1.27 L[/tex]
Therefore, the volume of the gas in its final state is equal to 1.27 L when the gas is heated to 47ºC and compressed to 5.0 atm.
Learn more about ideal gas equation, here:
brainly.com/question/3637553
#SPJ2
PLS HELP THIS IS SCIENCE !!
IGNORE THE QUESTIONS I ACCIDENTLY PRESSED ON
Answer:
10.)14
Explanation:
MARK AS BRAINLEST!!
Answer:
where is the answer??
Please do not just take the points without answering the question.
6. What happens when :
a)
manganese dioxide is heated with conc.
hydrochloric
acid.
Answer:
Chlorine gas is produced
Explanation:
One of the methods of laboratory preparation of chlorine gas is to heat manganese dioxide with concentrated hydrochloric acid. The acid is oxidized by the manganese dioxide to liberate chlorine gas as follows;
MnO2(s) + 4HCl(aq) -------> MnCl2(aq) + 2H2O(l) + Cl2(g)
Hence, When manganese dioxide is heated with concentrated hydrochloric
acid, chlorine gas is liberated.
Help calculate the density and please type it like this and explain how you got the answer thanks
Mass:
Volume;
Density:
Answer: 2.5
Explanation:
density= 2.5
mass= 62.5 or 62.50
volume= 25 ( 75-50= 25)
so divide 62.5( or 62.50) by 25 which will led you to 2.5
What type of reaction does this illustration represent?
A. synthesis
B. decomposition
C.single-replacement
D.double replacement
Answer: IS B
Explanation:
Decomposition
Please helppppp!!! I have 10 minutes left!!!
Answer:
I think it's the ash can mix with rivers to form mudflows
Explain the process of fermentation.
Answer:
Fermentation, chemical process by which molecules such as glucose are broken down anaerobically. More broadly, fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old. The frothing results from the evolution of carbon dioxide gas, though this was not recognized until the 17th century.
Explanation:
looked it up-
Answer:
like babies or milk and cheese?
Explanation:
Which statement is true about the rotational period of the moon?
greater than the revolution period around Earth
always changing
less than the revolution period around Earth
equal to the revolution period around Earth
The statement is true about the rotational period of the moon " the rotational period of the moon is equal to the revolution period around Earth."
What is rotational period?A celestial object's rotation period may relate towards its sidereal rotation period, which is the time it takes for the object to complete one revolution around in its axis of rotation in sidereal seems like to the background stars.
What is revolution period?The orbital period is also known as the revolution period. it takes for one astronomical object to complete one cycle around another. It refers to planets and asteroids orbiting the Sun, moons orbiting planets, planetary systems orbiting other stars, or double stars in astronomy.
What is moon?In the night sky, the moon is just the brightest object. The moon doesn't at all produce its own light. It has no radiance. That is visible because the sun's light bounces off of it.
The rotational period of the moon is equal to the revolution period around Earth because the moon's rate of spin becomes tidally locked to its rate of revolution, it maintains the same face oriented towards the Earth In other words, every time the moon rounds the Earth, it rotates exactly once.
Therefore, the rotational period of the moon is equal to the revolution period around Earth will be correct answer.
To know more about rotational period click here.
https://brainly.com/question/242421.
#SPJ2
how many moles of HCI will react with 18.13g of SrO
Answer:
Explanation:
The balanced chemical equation between
SrO + 2HCl → H2O + SrCl2
Please help me with number 43
Answer:
The reason why atomic mass is usually not a whole number is because it is a weighted average of the mass numbers of isotopes
Explanation:
which process requires more energy to be released, condensation or freezing? explain
Answer:
Condensation
Explanation:
the process of evaporation and condensation takes 7.5 times as much energy as melting or freezing.
According to the forces of attraction, condensation process requires more energy to be released,as in the process state is changing from less orderly state to a more orderly state.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ2
what are radioactive tracers used for
Answer:
Radioactive tracers are widely used to diagnose industrial reactors, for instance by measuring the flow rate of liquids, gases and solids.
Explanation:
Radioactive tracers are widely used to diagnose industrial reactors, for instance by measuring the flow rate of liquids, gases and solids. A radioactive tracer is a chemical compound in which one or more atoms have been replaced by a radioisotope.
heres the link for more information
https://www.iaea.org/topics/radiotracers#:~:text=Radioactive%20tracers%20are%20widely%20used,been%20replaced%20by%20a%20radioisotope
.
What is the relationship between a planet's period of rotation and diameter?
There is, however, a relationship between a planet's distance from the Sun and its period of revolution. Kepler's third law of planetary motion says that the square of the planet's orbital period is proportional to the cube of its semimajor axis.
According to Kepler's third law of planetary motion, a planet's semimajor axis and orbital period are inversely proportional.
What is Kepler's third law?Kepler's third law is defined as the cubes of the semi-major axes of the planets' orbits are directly proportional to the squares of the planets' orbital periods. According to Kepler's Third Law, as an orbiting planet's radius increases, so does the time of its orbit around the Sun. A planet's orbits around the sun are accurately described by Kepler's third law in terms of their period and distance.
The cube (third power) of an orbital radius is directly related to the square (second power) of a planet's period (P2 = R3). The period of revolution shortens as the planet's distance from the sun rises.
Thus, according to Kepler's third law of planetary motion, a planet's semimajor axis and orbital period are inversely proportional.
To learn more about Kepler's third law, refer to the link below:
https://brainly.com/question/1608361
#SPJ2
The graph shows the speed of a car
traveling east over a 12 second
period. Based on the information in
the graph, it can be concluded that
in the first 6 seconds, the car is -
A changing its direction.
B experiencing less and less
friction.
moving at a constant speed
D climbing a steep incline.
Answer:
Letter B.
Explanation:
Changing its direction and climbing a steep incline can't be proven only by the graph info. You can see that it's speed isn't constant in the graph.
We have letter B left.
what is a chromatogram?
please help me out
Thank you
Answer:
a visible record (such as a series of colored bands, or a graph) showing the result of separation of the components of a mixture by chromatography.
Explanation:
Chromatography is a laboratory technique for the separation of a mixture. The mixture is dissolved in a fluid called the mobile phase, which carries it through a system on which is fixed a material called the stationary phase.
Answer:
Chromatography is a technique used to separate mixture of chemical substances into its individual compounds.
Explanation:
Question 2(Multiple Choice Worth 2 points)
(04.06 LC)
The properties of elements can be predicted by which of the following?
Where it is on the periodic table
Where it was discovered
Its color in its natural state
Its name
Answer:
location on the periodic table
Explanation:
WILL MARK BRAINLIEST
What is the oxidation state of Carbon in CaC2O4?
Answer:
The oxidation state of carbon in CaC204 is 3
Answer:The oxidation number of the carbons + the oxidation numbers of the oxygens must equal -2. Carbons + (-8) = -2 so the oxidation number of the carbons must be +6. Since there are 2 carbon atoms each must contribute +3 each. What is the oxidation number of S in Na2S2O3?
Explanation:
The oxidation state of Oxygen is -2 and that of Calcium is +2. There are four oxygen atoms which amounts to -8 charge. This leaves a charge of +6 on Carbon
A gas has a volume of 62.65 L at stp. At what temperture in C would the volume of the gas be 78.31 at a pressure of 612 mm hg
Answer:
1.79°C
Explanation:
Applying,
PV/T = P'V'/T'................. Equation 1
Where P = Initial presssure, V = Initial volume, T = Initial temperature, P' = Final pressure, V' = Final volume, T' = Final Temperature.
make T' the subject of the equation
T' = P'V'T/PV................ Equation 2
From the question,
Given: P = 760 mmHg (Standard pressure), T = 273 K (Standard temperature), V = 62.65 L, P' = 612 mmHg, V' = 78.31
Substitute these values into equation 2
T' = (612×78.31×273)/(760×62.65)
T' = 274.79 K
T' = (274.79-273) °C
T' = 1.79°C