Answer:
Explanation:
Impulse results in a change of momentum
FΔt = mΔV
F = mΔV/Δt
The impulse acting on the hammer will equal the impulse acting on the nail
If we assume upward is the positive direction
F = m(vf - vi)/t
F = 1.2(1.0 - (-1.5)) / 0.001
F = 3000 N
A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms, so the average force exerted on the nail is 3000 N.
What is average force?According to Newton's third law, there is an equal and opposite force for every force. The hammer's force on the nail will be identical in size to the nail's force on the hammer, but opposite in direction.
Momentum shifts as a result of impulse.
FΔt = mΔV
F = mΔV/Δt
The force exerted on the hammer will be equivalent to the force exerted on the nail.
m(vf - vi)/t = F
F = 1.2(1.0 - (-1.5)) / 0.001
F = 3000 N
Therefore, F = 3000 N, if A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms.
Learn more about force, here:
https://brainly.com/question/20038742
#SPJ2
Ram jumps onto a cement floor from a height of 1m and comes to rest in 0.1sec.
Then he jumps onto a sand floor from a height of 9m and comes to rest in 1sec.
Find the ratio of forces of cement floor and sand floor.
Answer:
3/10 F.
Explanation:
Height ( h ) = 1m
Time taken ( t ) = 0.1 second
Height² ( h² ) = 9m
Time taken² ( t² ) = 1 second
Solution,
F = ma
= m ( v - u ) / t
= m √2gh / t
now,
F/F² = √h/h² × t/t²
F¹ = 3/10 F.
answer !!
the book has a mass of 2.5 kg. What net force must act on the book to mak it accelerate to the left at a rate of 7.0m/s2?
Answer:
17.5 N
Explanation:
Given :Mass (m) = 2.5 kgAcceleration (a) = 7.0 m/s²To calculate :Force exerted (F)Calculation :• F = ma→ F = (2.5 × 7.0) N
→ F = 25/10 × 7 N
→ F = 5/2 × 7 N
→ F = (5 × 7)/2 N
→ F = 35/2 N
→ F = 17.5 N towards left
Hence, 17.5 N of net force must act on the book to make it accelerate to the left.
Water pumps use electrical energy to create mechanical energy needed to move water.
A 1875 W water pump is plugged into a 110 V electrical outlet.
Answer:
n/a
Explanation:
this question is not feasible
A first order reaction is 25% completed in 1h minutes. Calculate the time required for its 50% completion.
Which type of muscle cell can have multiple nuclei
Answer:
Skeletal muscle cells
Explanation:
Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.
pls mark me the brainliest
a car moving at 5 m/s accelerates at a rate of 10 m/s2 for 25 seconds. How far does it move during this time?
Answer:
t is time in s For example, a car accelerates in 5 s from 25 m/s to 3 5m/s. Its velocity changes by 35 - 25 = 10 m/s. Therefore its acceleration is 10 ÷ 5 = 2 m/s2
Explanation:
) Water flows through the system shown below. Estimate the volumetric flow rate if friction
losses are negligible.
The volumetric flow rate if friction is negligible = 0.00197 m³/sec
Given data :
P₁ = 7 atm = 709.275 kPa
P₂ = 1.5 atm = 151.988 kPa
d₁ = 0.74 cm = 0.0074 m
d₂ = 1.20 cm = 0.0120 m
h = 82 m
density of water ( p ) = 1000 kJ/m³
Estimate the volumetric flow rate
given that friction losses are negligible
V₁² - V₂² = [tex]\frac{2(P_{2} - P_{1}) }{p} + 2g(h )[/tex]
= 2( 151.988 - 709.275 ) + 2 * 9.81 * 82
= 2 ( - 557.287 ) + 1608.84
= - 1114.574 + 1608.84 = 494.266
∴ V₁² - V₂² = 494.266 ----- ( 1 )
Also given that:
volumetric flow rate ( Q ) = A₁V₁ = A₂V₂
= π / 4 ( 0.0074 )² * V₁ = π / 4 ( 0.0120 )² * V₂
= 0.000043 V₁ = 0.000113 V₂
∴ V₁ = 2.63 V₂
Back to equation ( 1 )
( 2.63 v₂ )² - V₂² = 494.266
V₂² = ( 494.266 ) / 1.63
∴ V₂ = √303.23 = 17.41 m/sec
Therefore the volumetric flow rate ( Q )
Q = A₂V₂
= π / 4 * ( 0.0120 )² * 17.41
= 0.00197 m³/sec
Learn more about volumetric flow rate : https://brainly.com/question/24356835
A physics professor leaves her house and walk along the sidewalk toward campus. After 5 min it starts to rain and she returns home. Her distance from her house as a function of time shown in figure: 1. At which of the labelled point is her velocity (a) zero? (b) Constant and positive? (c) constant and negative ? (d) Increasing in magnitude? (e) Decreasing in magnitude?
Answer: I think its zero-
I dont really know about this...
Use words in the box to complete the diagram, and the definitions below it. Some words will be used
more than once and some words may not be used at all
Hertz
period
metros
dip
seconds
peak
wavelength trough
crest
frequency
amplitudo
oscillation equilibrium line
- the top of a wave
the bottom of a wave
the level if the wave flattened out
a repeated action back and forth or up and down
the number of waves that pass every second (measured in
the time it takes for one complete wave to pass (measured in
Answer:
There ya go
Explanation:
The correct words to fill the given blanks would be as follows:
- Peak
- Trough
- Equilibrium Line
- Oscillation
- Frequency, Hertz
- Period, seconds
The "peak" is denoted as the highest or maximum point that the wave attains while 'Trough' is characterized as the base of the wave. The 'equilibrium line' is characterized as the extent to which the wave flattens or compresses.Oscillation is defined as the process in which an object moves in the "back and forth motion."Frequency is the amount of occurrences that waves travel in a second which is denoted in the terms of Hertz.Lastly, period is the duration required by wave to accomplish one motion is denoted in terms of seconds.Amplitude is the breadth or magnitude of the waves.Learn more about "Oscillation" here:
brainly.com/question/9820984
Which phrase describes the energy transformation that happens in a
generator?
A. Electrical energy into chemical energy
ООО
B. Electrical energy into mechanical energy
C. Chemical energy into electrical energy
O
D. Mechanical energy into electrical energy
SI
Answer:
Mechanical energy into electrical energy
Explanation:
Answer:
ExplanMechanical energy into electrical energy
SIation:
Two rods of mass m, length L are stuck together to form an X shape and spun around the center. What is the rotational inertia
help me i have little time left i will give brainliest
Answer:
Explanation:
Conservation of momentum
Initial momentum is zero
3.0(6.0) + 7.0v = 0
v = -18/7 = - 2.57142857...
|v| = 2.6 m/s
An electrician reads a resistance of 65 ohms and when energize the circuit runs 1.77 amps. what voltage to the system run on?
Answer:
115.05 Volts
Explanation:
We can use Ohm's Law!
V=IR
V= 1.77 * 65
V=115.05 Volts
How should an artistic statement be written?
ОА.
from your own perspective
OB.
in a non-factual, persuasive manner
O C.
as a lengthy and overly extensive essay
OD. by the artist alone with no outside critique
An artistic statement should be written from your own perspective.
What is an artistic statement ?An artist's statement, also known as an artist statement, is a written summary of their creative output. The brief essay serves as an explanation of and a defense of their own work for the spectator. As a result, it is didactic, descriptive, or reflective in nature and seeks to inform, connect with an artistic environment, and reveal the inspiration behind the work.
The writing created by the artist aims to contextualize, justify, extend, and/or explain their body of work. It situates—or tries to situate—the piece in relation to art history, art theory, the contemporary art scene, and the times. The statement also demonstrates that the artist is aware of their aims, their practice, its place within the parameters of art, and the debate that surrounds it.
Learn more about statement , refer the link:
https://brainly.com/question/13960241
#SPJ2
compare and contrast a transverse wave and a compressional wave Give an example for each type
Answer:
Transverse waves oscillate perpendicular to the direction of the wave (e.g. any electromagnetic wave like radiowaves, x-rays...) whilst compressional waves oscillate in the same direction of the wave (e.g. sound waves)
Explanation:
How long does it take the second hand of a clock to move through 3.57 rad?
Answer in units of s.
Answer:
Its angular velocity is
π
30
radians per second (about 0.105 radians/s.
Explanation:
Explanation:
Think of it like this:
There are
2
π
radians in one complete rotation, and that takes the second hand 60 seconds to complete.
So, the rate of rotation (the angular velocity) is
2
π
/60 = pi/30 radians per second# which is about 0.105 radians per second.
To solve the problem we will first calculate the time taken by the second arm to travel 1 rad.
Time taken by the second arm to travel 1 rad
We know that the arm of the second travels 2π radians in 60 seconds. therefore, the time is taken to travel 1 rad by the second arm,
[tex]1\rm\ rad = \dfrac{60}{2\pi}[/tex]
Time taken by the second arm to travel 3.57 radTime taken by the second arm to travel 3.57 rad
[tex]=3.57\times \dfrac{60}{2\pi}\\\\= 34.09\rm\ sec[/tex]
Hence, the time taken by the second arm to travel 3.57 rad is 34.09 sec.
Learn more about Radians:
https://brainly.com/question/16989713
the driver of a 2.0 × 10³ kg red car traveling on the highway at 45m/s slams on his brakes to avoid striking a second yellow car in front of him, which had come to of because locking ahead.After the brakes are applied a constant friction force of 7.5 × 10³ N acts on the car ignore air resistance.
a₎ Determine the least distance should the brakes be applied to avoid a collision with the other vehicle?
Answer:
Explanation:
a = F/m = 7500/2000 = 3.75 m/s²
v² = u² + 2as
s = (v² - u²) / 2a
s = (0² - 45²) / (2(-3.75))
s = 270 m
Which of the following is NOT a function of the lens in the eye?
It can perform minor adjustments for distance.
It flattens when light rays from distant objects are to be focused.
It is a light receptor that generates nerve signals that are sent to the brain.
It maintains its spherical shape to view nearby objects.
Answer:
it is a light receptor that generates nerve signals that are sent to the brain
Explanation:
the lens are like the glasses, this means that is used to see things better. You just put them in your eye and that's all it's not connected to the brain
Answer:
c
Explanation:
An accessory such as a coupling that performs a mechanical rather than an electrical function is called?
how is the atomic mass determined?
Answer:
Atomic mass is defined as the number of protons and neutrons in an atom, where each proton and neutron has a mass of approximately 1 amu (1.0073 and 1.0087, respectively). The electrons within an atom are so miniscule compared to protons and neutrons that their mass is negligible.
Explanation:
Consider the following force:
A horse is pulling forward on a wagon with a force of 200 N.
According to Newton's third law, what other force must be happening?
The horse is pushing backward on the wagon with a force of 200 N.
The ground is pushing backward on the horse with a force of 200 N.
The wagon is pulling backward on the horse with a force of 200 N.
A converging-diverging nozzle has a throat area of 10 cm2 and an exit area of 28.96 cm2 . A normal shock stands in the exit when the back pressure is sea-level standard. If the upstream tank temperature is 400 K, estimate (a) the tank pressure and (b) the mass fl ow
The tank pressure is 5.08 kPa and the mass flow rate is 2.6 kg/s.
The given parameters:
Throat area of the nozzle, [tex]A^*[/tex] = 10 cm² = 0.001 m²The exit area of the nozzle, A = 28.96 cm² = 0.002896 m²Air pressure at sea level = 101.325 kPaThe ratio of the areas of the converging-diverging nozzle is calculated as follows;
[tex]= \frac{A}{A^*} \\\\= \frac{0.002896}{0.001} \\\\= 2.896[/tex]
From supersonic isentropic table, at [tex]\frac{A}{A^*} = 2.896[/tex], we can determine the following;
[tex]M_e = 2.6 \ kg/s\\\\\frac{P_o}{P_e} = 19.954[/tex]
The tank pressure is calculated as follows;
[tex]\frac{P_o}{P_e} = 19.954 \\\\P_e = \frac{P_o}{19.954} \\\\P_e = \frac{101.325 \ kPa}{19.954} \\\\P_e = 5.08 \ kPa[/tex]
Thus, the tank pressure is 5.08 kPa and the mass flow rate is 2.6 kg/s.
Learn more about converging-diverging nozzle design here: https://brainly.com/question/13889483
3. How much power does an electric light installation draw at 120 V if it creates a current of 0.8 amps?
O A. 32 watts
O B. 120 watts
Q C. 48 watts
D. 96 watts
Answer:D
Explanation:
R =
V
I
=
120 volt
0.8 ampere
= 150 ohm (Ω)
P = V × I
= 120 volt × 0.8 ampere
= 96 watt (W)
An electric light installation can draw Power of 96 Watt at 120 V if it creates a current of 0.8 amps
What is electric power ?Electric power is the rate of electric energy transfer by an electric circuit per unit time . It is denoted by P and measured using the SI unit of power that is Watt (W)
since, Electric Power = voltage * current
Power = 120 V * 0.8 A
Power = 96 Watts
An electric light installation can draw Power of 96 Watt at 120 V if it creates a current of 0.8 amps
learn more about Electric power
https://brainly.com/question/16925887?referrer=searchResults
#SPJ3
Blaine and her sister are identical twins riding roller coasters at Kinetic Kars. They each ride the
roller coaster on their own once. Next time, they ride the roller coaster together. On which ride
do you think they have the most kinetic energy? Explain your answer using information from class
activities.
In this image F1 is equal to 100 N and F2 is equal to 50 N. What is the net force?
Answer:
net force would be 50 N right
Explanation:
Ginny is snowboarding down a ski slope. Her total mass (including the snowboard) is 68.5 kg. When she reaches the bottom of the slope, she is moving at 6.55 m/s. The coefficient of friction between the snowboard and the ground is 0.088 . How fast will Ginny be moving 2 seconds after reaching the bottom of the slope?
1) 5.71 m/s
2)5.91 m/s
3)4.82 m/s
4)4.08 m/s
Answer:
Explanation:
Assuming the run out at the bottom of the slope is horizontal
μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at
v = u + μgt
v = 6.55 - 0.088(9.81)(2)
v = 4.82 m/s
After reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
What is Friction?Friction is the force which opposes the relative motion of solid surfaces, fluid layers, and material elements that are sliding against each other. There are many types of friction like
Dry frictionFluid frictionLubricated friction Skin friction Internal frictionFriction can be expressed as
Ff = μFN
where, Ff is the force of friction (N)
μ is the coefficient of friction.
FN is the normal force
As per the above equation, it is actually the normal force, not the weight, which is responsible for friction.
For given information,
Assuming the bottom of the slope is horizontal
So, μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at (u- initial speed, v= final speed, a= acceleration and t= time)
v = u + μgt (g= acceleration due to gravity)
u = 6.55 - 0.088(9.81)(2)
u = 4.82 m/s
Thus, after reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
Learn more about Friction, here:
https://brainly.com/question/13000653
#SPJ2
Raghu studies in grade 6th. He wants a cricket bat to be made by a carpenter. He tells the
that the length of the bat should be 7 hand spans. The tall carpenter tells Raghu that it
will be ready by tomorrow. When Raghu went to collect the bat the next day, he was very
disappointed. Why? Was the bat longer or shorter than what Raghu expected? Give reason.
carpenter
Based on the information given, it can be noted that the bat was either shorter or longer than what he expected.
From the information given, it was stated that Raghu wants a cricket bat to be made by a carpenter and he tells the carpenter that the length of the bat should be 7 hand spans.
Since he got disappointed when he collected the bat, the reason for this will be because the bat was either shorter or longer than what he requested.
Learn more about length on:
https://brainly.com/question/25292087
Who actually asked Abraham to sacrifice his son?
I think god did ??? I searched it up okay
God asked him to scarface his sons life
Which is the independent variable in the graph of the U.S. population 1800-1900?
1. United States
2. straight lines
3. years
4. population
Answer:
3. years
Explanation:
The independent variable is the x axis of graph
a spring with a spring constant of 65 n/m is displaced -94cm. what is the magnitude of the force exerted by the spring
Answer:
Explanation:
F = kx = 65 N/m(0.94 m) = 61.1 = 61 N