a -0.06 C charge is placed in a uniform electric field with a strength of 200 N/C. what is the magnitude and direction of the force on the charge​

Answer:

1. Body Tube

2.Revolving Nose Piece

3.Low Objective

4.Med Objective

5.High Objective

6.Stage clips

7.Diaphragm

8.Light source

9.Ocular lens

10. Arm

11.Stage

12.Coarse Adjustment knob

13.Fine Adjustment knob

14. base

According to Newton third law of motion,  what must be true of the magnitude of the reaction force is that the reaction force will be equal and opposite to the action force of 110 newtons

From Newton third law of motion which state that in every action of force, there will be equal and opposite reaction.

If a 75 kg box collides with a stationary 35 kg box with a force of 110 N, the mass 35 kg will produce a reaction force which is equal and opposite to the action force 110 newton received from mass 75 kg.

Therefore, what must be true of the magnitude of the reaction force from mass 35 kg is that the mass will produce an equal and opposite force equal to 110 Newtons.

Learn more about collision here: https://brainly.com/question/7579673

The mass of the beach ball is 0.33 kg

From the question,

We are to determine the mass of the beach ball.

Using the formula

ρ = mv

Where ρ is the momentum

m is the mass

and v is the velocity

From the given information,

ρ = 3 kg m/sec

v = 9 m/sec

Putting the parameters into the formula, we get

3 = m × 9

∴ m = 3 ÷ 9

m = 0.33 kg

Hence, the mass of the beach ball is 0.33 kg

Learn more here: https://brainly.com/question/20345538

Convergent boundaries are caused by the collision of two plates and can originate volcanoes. Transforming boundaries produce fractures by displacement. The correct option is D. Type A boundaries have fewer volcanoes.

----------------------------------------

The crust -the outermost layer of the earth- is divided into many plates that move over the mantle.

These plates are limited by three types of ridges or borders that differ in the movement they produce.

Boundaries types:

I. Divergent:

II. Convergent.

III. Transforming.

In the attached images, we can see

Image B is the one that can originate volcanoes because transforming boundaries only produce fractures.

So the correct option would be D.

--------------------------------

Learn more about convergent, divergent and transforming boundaries at

https://brainly.com/question/2437823?referrer=searchResults

https://brainly.com/question/2507413?referrer=searchResults

https://brainly.com/question/5082756?referrer=searchResults

https://brainly.com/question/16962517?referrer=searchResults

https://brainly.com/question/16660809?referrer=searchResults

https://brainly.com/question/11162339?referrer=searchResults

https://brainly.com/question/13311455?referrer=searchResults

Answer:

d

Explanation:

Answer:

A because that's the answer

The efficiency of the engine at the given useful energy and input energy is 28%.

The given parameters:

The efficiency of the engine is defined as the ratio of the output energy (useful energy) to the input energy and it is calculated as follows;

[tex]efficiency\ = \frac{0ut put \ energy}{1nput \ energy} \times \ 100\%\\\\efficiency\ = \frac{35}{125} \times 100\%\\\\efficiency\ = 28 \ \%[/tex]

Thus, the efficiency of the engine at the given useful energy and input energy is 28%.

Learn more about efficiency of engine here: https://brainly.com/question/6751595

Answer:

ITS A

Explanation:

Answer:

the radio wave. - The frequency ranges between 300 gigahertz (GHz) to 30 hertz (Hz).

Explanation:

Answer:

B) the average distance from the Earth to the Sun

Explanation:

Answer:

Friction

Explanation:

As the toy cars rolls away, more friction is created. The more friction there is, the more friction on surface rubs against another which creates friction which in-term slows it down. Hope this helps.

[tex]\\ \sf\longmapsto F=\dfrac{Gm_1m_2}{r^2}[/tex]

[tex]\\ \sf\longmapsto F=\dfrac{Gm^2}{r^2}[/tex]

[tex]\\ \sf\longmapsto G=\dfrac{Fr^2}{m^2}[/tex]

SI units:-

[tex]\\ \sf\longmapsto G=\dfrac{Nm^2}{kg^2}[/tex]

Option C is correct

The ratio of time of flight for inelastic collision to elastic collision [tex](t_A :t_B)[/tex] is 1:2

The given parameters;

Considering inelastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\m_1u_1 + 0 = v(m_1 + m_2)\\\\v= \frac{m_1u_1}{m_1 + m_2} \ -- (1)\\\\[/tex]

The time of motion of the system form top of the table is calculated as;

[tex]v = u + gt\\\\v = 0 + gt\\\\v = gt\\\\t= \frac{v}{g} \\\\t_A = \frac{m_1u_1}{g(m_1 + m_2)} \ \ ---(2)[/tex]

Considering elastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\m_1u_1 + 0 = m_1v_1 + m_2v_2\\\\m_1 u_1 = m_1v_1 + m_2v_2[/tex]

Apply one-directional velocity

[tex]u_1 + (-v_1) = u_2 + v_2\\\\u_1 -v_1 = 0 + v_2\\\\v_1 = v_2 -u_1[/tex]

Substitute the value of [tex]v_1[/tex] into the above equation;

[tex]m_1u_1 = m_1(v_2 - u_1) + m_2 v_2\\\\m_1u_1 = m_1v_2 -m_1u_1 + m_2v_2\\\\2m_1u_1 = m_1v_2 + m_2v_2\\\\2m_1u_1= v_2(m_1 + m_2)\\\\v_2 = \frac{2m_1u_1}{m_1+ m_2} \ --(3)[/tex]

where;

[tex]v_2[/tex] is the final velocity of the block after collision

Since the bullet bounces off, we assume that only the block fell to the ground from the table.

The time of motion of the block is calculated as follows;

[tex]v_2 = v_0 + gt\\\\v_2 = 0 + gt\\\\t = \frac{v_2}{g} \\\\t_B = \frac{v_2}{g} \\\\ t_B = \frac{2m_1u_1}{g(m_1 + m_2)} \ \ ---(4)[/tex]

The ratio of time of flight for inelastic collision to elastic collision is calculated as follows;

[tex]\frac{t_A}{t_B} = \frac{m_1u_1}{g(m_1 + m_2)} \times \frac{g(m_1 + m_2)}{2m_1u_1} \\\\\frac{t_A}{t_B} = \frac{1}{2} \\\\t_A:t_B = 1: 2[/tex]

Learn more about elastic and inelastic collision here: https://brainly.com/question/12497950

Answer:

8 seconds

Explanation:

Since the carspeed is in km/h, we need equal units, so we will make 100.0m 0.1000km.

Then we need to find how long it takes the car to travel 0.1km

We can use the formula distance=speed * time and get

0.1=45 * time

Therefore we get .002222... hours

Multiplying this by 3600 (to get seconds, 60x60), we get 8 seconds

Answer:

8m/s

Explanation:

speed = 45km/h

Distance = 100m

we have to find time = ?

Formula for speed is = Distance/ Time

Here Distance is given in 'm' so we need to convert speed value in 'm'

So to convert km/h in m formula is divide 45km/h by 3.6 then the km/h value gets converted in m so now the value is 12.5 m/s

So now,

speed = Distance/Time

we have to find Time

Then,

Time = Distance/ Speed

= 100/12.5

= 8m/s

Answer:

mass= 20kg

g=10m/s2

weight is F=mg

F=20×10

F=200N

Answer:

Yes.

Explanation:

Displacement is a vector quantity, meaning it has to be a straight graph jointing from starting point to final point and has a direction as well as magnitude and it can also be negative as well as positive and zero.

Displacement is also changes in position (points) of distance. A distance is scalar quantity meaning it only has magnitude and does not have direction. Since distance is scalar quantity, it cannot be negative. Also graph of distance can be a curve graph or any graph.

So when does displacement equal to distance? If an object is moving in straight path or line in one/fixed direction, both displacement and distance are same.

Because if a distance is a straight path and the displacement is simply a straight line (or ray) jointing from starting point to end point, both distance and displacement are both straight path or rays. Since distance and displacement have same graph, we can conclude that both are same in values.

If we go by calculus, given x = 2t as example of straight graph where x stands for position and t stands for time. We can find the displacement from b to a by using the following formulas:

Displacement

[tex]\displaystyle \large{s=\int\limits^b_a {v} \, dt}[/tex]

Distance

[tex]\displaystyle \large{l=\int\limits^b_a {|v|} \, dt}[/tex]

v stands for velocity which we can find from:

Velocity

[tex]\displaystyle \large{v=\frac{dx}{dt}}[/tex]

If you have learnt calculus, first, differentiate x = 2t with respect to t.

[tex]\displaystyle \large{v=2}[/tex]

Then substitute v = 2 in s and l to find find if both displacement and distance are equal in straight path.

Displacement

[tex]\displaystyle \large{s=\int\limits^b_a {2} \, dt}\\\displaystyle \large{s=[2t]\limits^b_a}\\\displaystyle \large{s=2b-2a = 2(b-a)}[/tex]

Distance

[tex]\displaystyle \large{l=\int\limits^b_a {|2|} \, dt}\\\displaystyle \large{l=\int\limits^b_a {2} \, dt}\\\displaystyle \large{l=[2t]\limits^b_a}\\\displaystyle \large{l=2b-2a=2(b-a)}[/tex]

Since both displacement and distance are equal when integrating on straight graph, we can conclude that an object moving in straight fixed point has same distance and displacement.

An earthquake with a magnitude of 5.5 releases 4.5 × 10¹² J of energy.

The magnitude of an earthquake is a number that characterizes the relative size of an earthquake and is based on the measurement of the maximum motion recorded by a seismograph.

If the magnitude of the earthquake is M = 5.5, we can calculate the amount of energy released (E) using the following expression.

[tex]M = \frac{2}{3} log(\frac{E}{E_0} )\\\\E = E_0 \times 10^{\frac{3}{2}M } = 10^{4.4} \times 10^{\frac{3}{2}(5.5) } = 4.5 \times 10^{12} J[/tex]

where,

An earthquake with a magnitude of 5.5 releases 4.5 × 10¹² J of energy.

Learn more about earthquakes here: https://brainly.com/question/18109453

Answer:

yes , true the magnitude of the reaction force.

Answer:

The density of air is 1.3 kg/m'. Calculate the mass of air in the room.

Answer:

the meaning of conduction is the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.

Explanation:

Answer:

the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.

Explanation:

Answer:

Normative

Explanation:

It is normal occurance but not unnatural

Answer:

HOPE THIS HELPS!!

Explanation:

Velocity is speed as well as distance mentioned.

The car is traveling at a constant speed of 20m/s but it may not be traveling in any particular direction. It would be taking many turns (left and right) or it would be moving in a circular manner.

So,it is at constant speed but not constant velocity.

We want to find the energy that we need to transform 2kg of ice at 0°C to water at 20°C.

We will find that we must give 840,000 Joules.

First, we must change of phase from ice to water.

We use the specific latent heat of fusion to do this, this quantity tells us the amount of energy that we need to transform 1 kg of ice into water.

So we need 336,000 J of energy to transform 1kg of ice into water, and there are 2kg of ice, then we need twice that amount of energy:

2*336,000 J = 672,000 J

Now we have 2kg of water at 0°C, and we need to increase its temperature to 20°C.

Here we use the specific heat, it tell us the amount of energy that we need to increase the temperature per mass of water by 1°C.

We know that:

specific heat of capacity of water = 4200 J/kg°C

This means that we need to give 4,200 Joules of energy to increase the temperature by 1°C of 1kg of water.

Then to increase 1°C of 2kg of water we need twice that amount:

2*4,200 J = 8,400 J

And that is for 1°C, we need to give that amount 20 times (to increase 20°C) this is:

20*8,400 J = 168,000 J

Then the total amount of energy that we must give is:

E = 672,000 J + 168,000 J = 840,000 J

If you want to learn more, you can read:

https://brainly.com/question/12474790

Answer:

Though pitch and frequency are not equivalent, they are correlated. This means that as one goes up, the other does as well. A higher frequency produces a higher pitch, and a lower frequency produces a lower pitch.

Explanation:

Ignore my comment, that information is unnecessary.

Assuming no friction between the skis and the water, the total work performed on the skier is due only to the pulling force (T, for tension). By Newton's second law, the net force exerted on the skier is

∑ F = T = ma

where m = 73.5 kg is the mass of the skier, and a is their acceleration.

Under constant acceleration, the skier is pulled a distance x such that

(12.2 m/s)² - (5.2 m/s)² = 2ax

and solving for x gives

x = (60.9 m²/s²) / a

Then the total work performed on the skier is

W = Tx

W = ma • (60.9 m²/s²) / a

W = (73.5 kg) (60.9 m²/s²)

W ≈ 4480 J

Answer:

A

Explanation:

Answer:

hi your answer to this question is 220'

Explanation:

hope this helped you

Answer:

50 Joules

Explanation:

Answer:

d. action force and the reaction force act on two different objects.

Hope you could understand.

If you have any query, feel free to ask.

In an action-reaction pair, action force and the reaction force act on two different objects.

Newton's Third Law of Motion states that "For every action, there is an equal and opposite reaction, action and reaction act on two different bodies."

It means that equal force are act on reaction force that is it is also known as reciprocal law of motion.

When considering the options,

So, In an action-reaction pair, action force and the reaction force act on two different objects. Thus, Option B is the correct answer.

Learn more about Newton's third law,

https://brainly.com/question/974124

#SPJ2

Given what we know, we can say that the most appropriate response by the nurse is to indicate that the parent should dilute the medicine in chocolate milk in order to make it more palatable.

Therefore, we can confirm that since this response is a calm and thought-out response that respects the patient and offers a viable solution, it can be considered the most appropriate statement by the nurse.

To learn more about Nursing care visit:

https://brainly.com/question/6685374?referrer=searchResults