The statement that is not true of natural selection is: Natural selection controls evolution by maintaining the features that individuals acquire over their lifetimes. So, option C is correct.
Natural selection does not directly affect features acquired throughout an individual's lifespan; rather, it affects traits that are already existing in the gene pool of a population. Natural selection is the process through which individuals with particular heritable qualities experience differential survival and reproduction, changing the frequencies of those traits within a population over time. Natural selection favors features that offer an advantage in the current environment, resulting in their preservation and increased frequency while eliminating those that are unfavorable.
Learn more about natural selection here:
https://brainly.com/question/3220954
#SPJ4
The complete question is:
Which of the following is not true of natural selection?
a) Natural selection strives to preserve beneficial qualities while eliminating harmful ones.
b) The next generation will consist more heavily of descendants of people who have improved environmental adaptation.
c) Natural selection controls evolution by maintaining the features that individuals acquire over their lifetimes.
d) Genetic diversity in a population is affected by natural selection; it results through mutation.
. How will this affect the amount of water and the amount of oxygen in the area?
Diffusion and aeration, photosynthesis, respiration, and decomposition all have an ongoing impact. In addition to fluctuating dissolved oxygen levels caused by temperature, salinity, and pressure fluctuations.
What impact does water have on oxygen?In comparison to warm water, cold water can hold more dissolved oxygen. The concentration of dissolved oxygen is highest in the winter and early spring when the water temperature is low. The concentration of dissolved oxygen is frequently lower in the summer and fall when the water temperature is high.
Why does water temperature impact how much oxygen is there in it?Water molecules receive energy as a result of rising water temperatures, which in turn causes gas and water molecules to gain more energy. This increased energy dissolves the water and oxygen molecules' weak molecular bonds, allowing oxygen to escape.
To know more about decomposition visit-
https://brainly.com/question/8009068
#SPJ1
HELPPPP mg + 2 hcl ➞ mgcl2 + h2 how many grams of mgcl2 are produced by 2.55 mol mg ?? PLEASE SET UP THE EQUATION CORRECTLY! THANKS
Answer: The balanced chemical equation for the reaction is:
Mg + 2 HCl → MgCl2 + H2
The molar ratio between MgCl2 and Mg is 1:1, which means that for every 1 mole of Mg that reacts, 1 mole of MgCl2 is produced. Therefore, the number of moles of MgCl2 produced can be calculated by simply using the same number of moles of Mg that reacts.
Given that 2.55 mol of Mg is reacting, the number of moles of MgCl2 produced can be calculated as:
2.55 mol Mg × (1 mol MgCl2/1 mol Mg) = 2.55 mol MgCl2
Now, to convert moles of MgCl2 to grams, we need to multiply the number of moles by the molar mass of MgCl2, which is 95.21 g/mol.
2.55 mol MgCl2 × 95.21 g/mol = 242.89 g MgCl2
Therefore, 2.55 mol of Mg will produce 242.89 g of MgCl2.
Explanation:
if 0.435 g of KMnO4 is dissolved in enough water to give 250 ml of solution, what is the molarity of
KMnO4?
ASAPP PO!! thankyouu!!!!!
Answer:
M = 0.011 mol/L
Explanation:
Molarity = n/V,
n: No. of moles
V: volume in liters
n of KMnO4 (Molar mass = 158 g/mol) = 0.435/158 = 0.00275 moles
Molarity (M) = 0.00275/0.25 = 0.011 mol/L
the initial concentration of base b in solution is 0.18 m. if the ph of the solution at equilibrium is 13.190, what is the percent ionization of the base? remember to use correct significant figures in your answer (round your answer to the nearest whole number). do not include the percent symbol in your response.
If the initial concentration of base b in solution is 0.18 m. if the pH of the solution at equilibrium is 13.190, the percent ionization of the base is 78.3.
How to find the percent ionization of the base?Calculating the concentration of hydroxide ions (OH⁻) in the solution at equilibrium is necessary to ascertain the base's percent ionization.
It is observed that the solution is basic, so use the following relationship:
pOH + pH = 14
According to question, the pH at equilibrium is 13.190, so find the pOH:
pOH = 14 - 13.190
= 0.810
Now, change pOH to [OH⁻] concentration:
[OH⁻] = [tex]10^_(-pOH)}[/tex]
= [tex]10^{-0.810}[/tex]
= 0.141 M
The concentration of [OH⁻] at equilibrium is 0.141 M.
To find the percent ionization of the base, it is required to compare the concentration of [OH⁻] at equilibrium with the initial concentration of the base.
Percent ionization = ([OH] / [B]) × 100
Place the values, it is observed that:
Percent ionization = (0.141 M / 0.180 M) × 100
= 78.3
The base has a 78 percent ionization rate, rounded to the closest whole number.
Thus, the base has a 78 percent ionization rate, rounded to the closest whole number.
Learn more about percent ionization, here:
https://brainly.com/question/30060037
#SPJ6
Answer: I put 78 on my homework and got it wrong. The computer said it was 86%
Explanation:he percent ionization is the ratio of the hydroxide ion concentration at equilibrium to the initial concentration of the base, multiplied by 100. Based on the pH, the equilibrium concentration of hydroxide ions is
[OH−]=10−(14.000−pH)=10−0.810=0.155
Therefore, the percent ionization is
0.155 M0.18 M×100=86%
Compute the internal energy change and temperature change for the two processes involving
1 mole of an ideal monatomic gas.
(a) 3200 J of heat are added to the gas and the gas does no work and no work is done on the gas
(b) 3200 J of work are done on the gas and the gas does no work and no heat is added or taken
away from the gas
The internal energy change and temperature change for the two processes involving 1 mole of an ideal monatomic gas for (a) ΔU = 3200 J, ΔT = 256.7 K and for (b) ΔU = -3200 J, ΔT = -256.7 K.
The internal energy change and temperature change for the two processes involving 1 mole of an ideal monatomic gas can be computed using the following formula:
ΔU = Q - W
Where ΔU is the internal energy change, Q is the heat added or taken away from the gas, and W is the work done by or on the gas.
For process (a), 3200 J of heat are added to the gas and the gas does no work and no work is done on the gas. Therefore, the internal energy change is:
ΔU = Q - W = 3200 J - 0 = 3200 J
The temperature change can be computed using the following formula:
ΔT = ΔU / (n * Cv)
Where ΔT is the temperature change, ΔU is the internal energy change, n is the number of moles of gas, and Cv is the molar heat capacity at constant volume.
For an ideal monatomic gas, Cv = 3/2 R, where R is the gas constant. Therefore, the temperature change is:
ΔT = 3200 J / (1 mol * 3/2 * 8.314 J/mol*K) = 256.7 K
For process (b), 3200 J of work are done on the gas and the gas does no work and no heat is added or taken away from the gas. Therefore, the internal energy change is:
ΔU = Q - W = 0 - 3200 J = -3200 J
The temperature change can be computed using the same formula as above:
ΔT = -3200 J / (1 mol * 3/2 * 8.314 J/mol*K) = -256.7 K
Therefore, the internal energy change and temperature change for the two processes are:
(a) ΔU = 3200 J, ΔT = 256.7 K
(b) ΔU = -3200 J, ΔT = -256.7 K
To know more about internal energy change, refer here:
https://brainly.com/question/13025271#
#SPJ11
Antifreeze containing ethylene glycol is also needed in automobiles in extremely hot climates. Using what you know about other colligative properties, explain why this is so
a student takes an ir spectrum of an unknown compound. the ir spectrum shows significant stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh). which possible compound is it?
The IR spectrum of an unknown compound displays considerable stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh).
The significant stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh) indicate that the compound could be an alcohol. This is because, in the infrared (IR) spectrum, the functional group -OH (hydroxyl group) of alcohols gives a strong peak at approximately 3200 to 3500 cm-1, which is a broad, intense peak. The peak intensity is determined by the number of -OH groups in the alcohol.In addition, the peak at 2900 cm-1 corresponds to a C-H bond, most likely the CH stretch of an aliphatic (saturated) hydrocarbon. As a result, the compound may be an aliphatic alcohol, which has the formula CnH2n+1OH, where n is any integer greater than or equal to one. Some possible examples of such alcohols include methanol (CH3OH), ethanol (C2H5OH), and propanol (C3H7OH).
Know more about compound displays
https://brainly.com/question/28587527
#SPJ11
A gas is known to be one of the following nitrogen oxides: NO, NO2, N2O4, or N2O. It has a density of 1.96 g/L at 273 K and 1.00 atm. Determine its identity.
Please write out the steps too, I am so lost on how to start this question. Thank you so much!
That the calculated molar mass of the gas is closest to the molar mass of N2O. Therefore, the gas is most likely N2O.
What is Density?
Density is a physical property of matter that describes how much mass is contained in a given volume. It is defined as the amount of mass per unit volume, and is typically expressed in units of grams per cubic centimeter (g/cm3) or kilograms per cubic meter (kg/m3).
The gas density and the conditions provided can be used to calculate the molar mass of the gas using the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Rearranging this equation to solve for n/V, we get:
n/V = P/RT
M = m/n
where M is the molar mass, m is the mass of the gas, and n is the number of moles.
Since the density is given in grams per liter, we can assume that 1 liter of the gas has a mass of 1.96 grams. Therefore, the number of moles of the gas in 1 liter can be calculated as:
n/V = P/RT = (1 atm)/(0.08206 L·atm/mol·K × 273 K) = 0.0446 mol/L
The number of grams of the gas in 1 liter can be calculated as:
m = density × volume = 1.96 g/L × 1 L = 1.96 g
Therefore, the molar mass of the gas is:
M = m/n = 1.96 g / 0.0446 mol = 43.9 g/mol
Comparing this molar mass to the molar masses of the possible nitrogen oxides:
NO has a molar mass of 30.01 g/mol
N2O4 has a molar mass of 92.01 g/mol
N2O has a molar mass of 44.01 g/mol
We can see that the calculated molar mass of the gas is closest to the molar mass of N2O. Therefore, the gas is most likely N2O.
Learn more about Density from given link
https://brainly.com/question/1354972
#SPJ1
Calculate the mass of sodium azide required to decompose and produce 1.86 moles of nitrogen. Refer to the periodic table to get the atomic weights.
For context, the airbag is 58 liters when fully inflated. The air pressure inside the airbag should be 4.4 psi. This pressure value is in addition to the normal atmospheric pressure of 14.7 psi, giving a total absolute pressure of 19.1 psi, which equals 1.30 atmospheres.
(Moles of Nitrogen calculated using Ideal Gas Law)
Answer:Therefore, there are approximately 2.38 moles of nitrogen gas inside the fully inflated airbag
Explanation:
To calculate the number of moles of nitrogen gas inside the fully inflated airbag, we can use the Ideal Gas Law:
PV = nRT
where P is the absolute pressure of the gas (in atmospheres), V is the volume of the gas (in liters), n is the number of moles of gas, R is the universal gas constant (0.08206 L atm/mol K), and T is the temperature of the gas (in Kelvin).
We know that the volume of the airbag is 58 liters and the absolute pressure is 1.30 atmospheres (which includes the atmospheric pressure of 1 atmosphere). We also know that the temperature inside the airbag is likely to be close to the ambient temperature, which we can assume is around 25°C or 298 K.
So, we can rearrange the Ideal Gas Law to solve for n:
n = PV/RT
n = (1.30 atm * 58 L) / (0.08206 L atm/mol K * 298 K)
n = 2.38 moles
Therefore, there are approximately 2.38 moles of nitrogen gas inside the fully inflated airbag.
which of the following options correctly describe the inscribed polygon method for predicting aromaticity? select all that apply. multiple select question. place the polygon with one of its flat sides down and draw a circle that touches all the vertices. mos below the center of the circle are bonding orbitals, and mos above the center are antibonding orbitals. where each vertex touches the circle, draw a line corresponding to a molecular orbital. aromatic systems have all bonding mos and homos completely filled with no unpaired electrons. place one electron in each bonding orbital, then pair up.
The inscribed polygon method for predicting aromaticity involves placing a polygon with one of its flat sides down and drawing a circle that touches all the vertices.
Molecular orbitals (MOS) below the center of the circle are bonding orbitals, and MOS above the center are antibonding orbitals. At each vertex where the polygon touches the circle, a line is drawn corresponding to a molecular orbital. Aromatic systems have all bonding MOS and homos (highest occupied molecular orbitals) completely filled with no unpaired electrons. This is done by placing one electron in each bonding orbital, then pairing up.
Learn more about Molecular orbitals: https://brainly.com/question/29750386
#SPJ11
The following are the correct options that describe the inscribed polygon method for predicting aromaticity:
Place the polygon with one of its flat sides down and draw a circle that touches all the vertices.Where each vertex touches the circle, draw a line corresponding to a molecular orbital.The MOS below the center of the circle are bonding orbitals, and MOS above the center are antibonding orbitals.Aromatic systems have all bonding MOs and HOMOs completely filled with no unpaired electrons.Place one electron in each bonding orbital, then pair up.The inscribed polygon method is a popular approach for predicting the aromaticity of a compound. The polygon's vertices represent the atoms of the compound, and the bond orbitals are represented by the lines. It is a cyclic arrangement of atoms with alternating single and double bonds that are more stable than their nonaromatic counterparts due to electronic delocalization. Aromaticity is a significant concept in organic chemistry because of its importance in the properties and reactivity of many organic molecules.
Learn more about aromaticity here: https://brainly.com/question/29497803
#SPJ11
Alcohols are a key intermediate in organic synthesis since they can oxidized to carbonyl containing functional groups. In this tutorial, we will cover: 1. what happens in an oxidation reaction 2. oxidation of secondary alcohols to ketones 3. oxidation of primary alcohols to aldehydes or carboxylic acids 4. oxidation reagents and how we can control oxidation The previous example showed the simplest alcohol and the oxidation products expected. Note that the oxidation of an alcohol to a higher oxidation state involves loss of hydrogens. This means that tertiary alcohols cannot be oxidized, since it does not have a hydrogen that can be lost. Longer primary and secondary alcohols can also be oxidized. Which of the reactions shown Constitute an oxidation reaction? CH, CHO CH,CH,OH CH,CO,CH CH,CH, OH CH, COH CH CHO - CH.CH OH > OH
The reactions that constitute oxidation reaction are, CH3CH2OH --> CH3CHO, CH3CHO --> CH3COOH, CH3CH2CH2OH --> CH3COCH3.
An oxidation reaction is a chemical reaction in which an atom or molecule loses one or more electrons. In the case of alcohols, oxidation typically involves the loss of hydrogen atoms and the addition of oxygen atoms to form a carbonyl-containing functional group.
The reactions that constitute an oxidation reaction are the ones that involve the loss of hydrogen atoms and the addition of oxygen atoms. In the examples given, the following reactions are oxidation reactions:
1) CH3CH2OH --> CH3CHO (oxidation of a primary alcohol to an aldehyde)
2) CH3CHO --> CH3COOH (oxidation of an aldehyde to a carboxylic acid)
3) CH3CH2CH2OH --> CH3COCH3 (oxidation of a secondary alcohol to a ketone)
The other reactions shown do not involve the loss of hydrogen atoms or the addition of oxygen atoms, and therefore do not constitute oxidation reactions.
Oxidation reagents are chemical compounds that are used to carry out oxidation reactions. Some common oxidation reagents include chromic acid (H2CrO4), potassium permanganate (KMnO4), and sodium hypochlorite (NaClO).
The choice of oxidation reagent and the reaction conditions can be used to control the level of oxidation and the products formed.
For example, using a milder oxidation reagent or lower reaction temperatures can help prevent over-oxidation of the alcohol to a carboxylic acid.
To know more about oxidation, refer here:
https://brainly.com/question/15578795#
#SPJ11
How many grams of ammonia are needed to make 1.25 L solution with a pH of 11.68?
The mass (in grams) of ammonia, NH₃ needed to make 1.25 L solution with a pH of 11.68 is 0.102 grams
How do i determine the mass of ammonia needed?First, we shall determine the hydroxide ion concentration in the solution. Details below:
pH of solution = 11.68pOH = 14 - 11.68 = 2.32Hydroxide ion concentration [OH⁻] =?pH of a solution is given by the following formula:
pOH = -Log [OH⁻]
Inputting the various parameters, we have
2.32 = -Log [OH⁻]
Multiply through by -1
-2.32 = Log [OH⁻]
Take the anti-log of -2.32
[OH⁻] = Anti-log -2.32
[OH⁻] = 0.0048 M
Next, we shall determine the molarity of the ammonia. Details below:
NH₃(aq) + H₂O <=> NH₄⁺(aq) + OH⁻(aq)
From the above equation,
1 mole of OH⁻ is present in 1 mole of NH₃
Therefore,
0.0048 M OH⁻ will also be present in 0.0048 M NH₃
Next, we shall determine the mole of ammonia. Details below:
Volume = 1.25 LMolarity = 0.0048 MMole of ammonia =?Molarity = Mole / Volume
Cross multiply
Mole of ammonia = molarity × volume
Mole of ammonia = 0.0048 × 1.25
Mole of ammonia = 0.006 mole
Finally, we shall determine the mass of ammonia needed. Details below:
Mole of ammonia = 0.006 moleMolar mass of ammonia = 17 g/molMass of ammonia = ?Mass = Mole × molar mass
Mass of ammonia = 0.006 × 17
Mass of ammonia = 0.102 grams
Therefore, the mass of ammonia needed is 0.102 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
Which situation would be directly related to the science of ecology?
Responses
studying how the mayfly population affects the number of trout in a stream
studying how the mayfly population affects the number of trout in a stream
developing strains of corn that can withstand a combination of drought and high winds
uncovering the genetic makeup of the eastern cottontail rabbit
learning about foods that benefit the heart and blood vessels
Answer: A..(studying how the mayfly population affects the number of trout in a stream)
Uncovering the genetic makeup of the eastern cottontail rabbit would be directly related to the science of ecology.
Option D is correct.
Ecology is a branch of science.Human science, population, community, ecosystem, and biosphere are all parts of ecology, which is a branch of science. The study of organisms, their environment, and how they interact with one another and their environment is known as ecology.
What is ecology's fundamental idea?The relationship between living things, like humans, and their physical environment is known as ecology. It aims to comprehend the crucial connections between animals and plants and the environment in which they live.
Question Incomplete:Which situation would be directly related to the science of ecology?
A. studying how the mayfly population affects the number of trout in a stream
B. studying how the mayfly population affects the number of trout in a stream
C. developing strains of corn that can withstand a combination of drought and high winds
D. uncovering the genetic makeup of the eastern cottontail rabbit
E. learning about foods that benefit the heart and blood vessels
Learn more about ecology:
brainly.com/question/1186120
#SPJ1
Which particle represents the size of the
sulfide ion compared to the sulfur atom?
S²-
ion
S
atom
S²-
ion
A B
S²-
ion
B C
Moreover, the S²⁻ion is bigger than a neutral S atom in size. Because there are more electrons in the S²⁻ionion than protons, there is less nuclear attraction on the valence electrons.
Who is the father of all atoms?At times, John Dalton was referred to as the originator of contemporary atomic theory. He postulated that all atoms of a certain element had the same size and mass in 1803. According to John Dalton, elements are made up of smaller atoms. The atomic theory of matter resulted from this.
Where do atoms exist?Everything, that's correct. Matter includes all liquids, solids, sand, plants, animals, and clouds. The building components of matter are called atoms. Every matter is made up of numerous atoms, similar to how a house is built of many bricks.
To know more about Atoms visit:
https://brainly.com/question/30898688
#SPJ1
describe how you will use nmr to determine if your product is e-stilbene, z-stilbene, or a mixture of the two
A potent analytical method used to ascertain the structure, make-up, and dynamics of molecules is nuclear magnetic resonance (NMR).
In NMR spectroscopy, the magnetic characteristics of molecule nuclei are measured in order to ascertain the structure of the molecule. The chemical shifts and coupling constants of the two isomers of stilbene, e-stilbene and z-stilbene, can be distinguished using NMR spectroscopy. The coupling constants are interactions between the spins of various nuclei, and the chemical shift is the shift in a nucleus' resonance frequency from a common reference frequency. The structure and relative concentrations of e- and z-stilbene in a sample can be determined using NMR spectroscopy.
learn more about isomers Refer:brainly.com/question/12796779
#SPJ1
How many grams are found in 5. 000 mol of carbon tetrachloride
769.11 grams are found in 5.000 mole of carbon tetra chloride. It is calculated by using Mole concept.
The mole is defined as the unit of amount of substance in the International System of Units (SI). The quantity amount of the substance is a measure of how many elementary entities of a given substance are in an object or the sample. The mole is known as containing exactly 6.02214076×1023 elementary entities. It is used in chemistry as a convenient way to express amounts of reactants and products of chemical reactions. The molar mass of a substance is defined as the ratio of the mass of a sample of that substance to its amount of substance. It is clear the the amount of substance is given as the number of moles in the sample. One mole of a substance is equal to 6.022 × 10²³ units of that substance such as of atoms, molecules, or ions.
The number 6.022 × 10²³ is known as the Avogadro's number or the Avogadro's constant. According to the mole concept, the concept of the mole is used to convert between mass and number of particles.
To learn more about Mole Concept
https://brainly.com/question/16488605
#SPJ4
Compose the cathode and anode processes of electrolysis of an aqueous solution Li2SO4, the total electrolysis equation
Answer:
Explanation:
The electrolysis of an aqueous solution of Li2SO4 involves the following processes:
At the cathode:
2H2O + 2e- → H2 (g) + 2OH-
At the anode:
2OH- → 1/2O2 (g) + H2O + 2e-
The overall reaction for the electrolysis of Li2SO4 is:
2Li2SO4 (aq) + 2H2O (l) → 2LiOH (aq) + H2 (g) + SO2 (g) + 1/2O2 (g)
Note: The reaction also produces SO2 gas in addition to H2 and O2.
5.13 Lab Report Online Form ES A
PLEASE HELP I NEED IT NOW
I WILL GIVE YOU 10 POINTS!
A sample lab report form based on the given parameters is given below:
The Lab ReportTitle: Investigating the Efficiency of Solar Panels in a Residential Setting
Introduction:
The purpose of this experiment was to investigate the efficiency of solar panels in a residential setting. The primary focus was on analyzing the output power of the solar panels under various conditions, such as the angle of incidence of sunlight and the distance from the light source.
Problem and Constraints:
The main problem was to ensure that the experiment was conducted in a controlled environment to obtain accurate results. Other constraints included the availability of equipment and weather conditions.
Plan and Design:
To conduct this experiment, a small-scale solar panel was set up in a controlled environment. The experiment involved measuring the output power of the solar panel under different conditions, including the angle of incidence of sunlight and the distance from the light source. The data collected was analyzed using statistical methods.
Procedure:
The solar panel was placed in a location where it would receive sunlight throughout the day. The angle of incidence was varied using an adjustable stand. The distance from the light source was also varied by moving the solar panel closer or farther from the light source. The output power of the solar panel was recorded at each variation of the angle of incidence and distance.
Evaluation and Revision:
The results showed that the efficiency of the solar panel decreased as the angle of incidence of sunlight increased. Similarly, as the distance from the light source increased, the efficiency of the solar panel decreased. Based on these results, we revised our experiment by adjusting the position of the solar panel to optimize its output power.
Conclusion:
In conclusion, the experiment successfully investigated the efficiency of solar panels in a residential setting. The results showed that the angle of incidence of sunlight and the distance from the light source significantly affect the efficiency of the solar panel. Further studies could be conducted to investigate the efficiency of solar panels under various weather conditions.
Read more about lab reports here:
https://brainly.com/question/20003985
#SPJ1
Which combination of foods provide the best source of omega-3 fatty acids?
Carrots and snow peas stir-fried in canola oil (section 5. 3 Fats and Oils in Foods and Figure 5-6: Saturated, monounsaturated, polyunsaturated, and trans fatty acid composition of common fats and oils. )
The correct answer is Carrots and snow peas stir-fried in canola oil which is the perfect combination of foods that provide the best source of omega-3 fatty acids.
What provides the most omega-3?Alpha-linolenic acid (ALA), the most prevalent omega-3 fatty acid in the majority of Western diets, can be found in leafy green vegetables, flax seeds and flaxseed oil, vegetable oils, nuts (especially walnuts), and some animal fat, particularly from grass-fed animals.
What exactly are omega-3 supplements?Omega-3s are nutrients that you can obtain through food or supplements and that support the growth and upkeep of a healthy body. They are essential to the composition of each cell wall you have. They also serve as an energy source and support the functioning of your immune system, heart, lungs, and blood vessels.
To know more about fatty acids visit-
https://brainly.com/question/30829902
#SPJ1
CHEMISTRY EXCERCISES
1. (a) Class: carboxylic acid; IUPAC name: propanoic acid. (b) Class: alkyl halide; IUPAC name: chloro-1-propane. (c) Class: alkane; IUPAC name: 1-propanecarbonitrile. (d) Class: ester; IUPAC name: ethyl methanoate.
What is IUPAC name?IUPAC stands for International Union of Pure and Applied Chemistry. It is an international scientific organization responsible for developing and promoting international standards in the fields of chemistry and chemical nomenclature. The IUPAC name of a chemical compound is an unambiguous, systematic method for naming compounds according to their chemical structure and physical properties.
(e) Class: ether; IUPAC name: dimethyl ether. (f) Class: acyl halide; IUPAC name: 1-chloro-2,2-difluoropropane-1-carbonyl chloride.
2. (a) Hexanoic acid: CH3CH2CH2CH2CH2COOH. (b) Butanal: CH3CH2CHO. (c) Pent-1-ene: CH2=CHCH2CH2CH3. (d) 1-bromo-2-methylbutane: CH3CH2CH(Br)CH3. (e) Ethyl methanoate: CH3COOCH2CH3. (f) Methoxypropane: CH3OCH2CH3. (g) But-2-yne: CH3C≡CHCH3.
3. Answer: B. CH3CONH2 is an amine because it contains an amine group (NH2).
4. Answer: A. 1-iodopropane is a member of the same homologous series as 1-bromopropane because they both have the same molecular formula (C3H7Br or C3H7I) and the same functional group (halogen).
To learn more about IUPAC name
https://brainly.com/question/28872356
#SPJ1
Pls help (100 points)
Given these reactions:
NO (g) + O3 (g)→NO2 (g) + O2(g), ΔH =−199 kJ
O3 (g)→32O2 (g), ΔH =−142 kJ
O2 (g)→2O (g), ΔH =+495 kJ
What is the ΔH for this reaction?
NO (g) + O (g)→NO2 (g)
−304 kJ
−199 kJ
+154 kJ
+438 kJ
The ΔH for the reaction [tex]NO (g) + O (g) = > NO^2 (g)[/tex] is 154kJ.
To calculate this, we need to add the ΔH values from the other reactions:
[tex]NO (g) + O^{3} (g)[/tex]→[tex]NO^{2} (g) + O^2(g)[/tex], ΔH =-199 kJ
[tex]O^3 (g)[/tex]→[tex]32O^2[/tex] (g), ΔH =-142 kJ
[tex]O^2[/tex] (g)→2O (g), ΔH =+495 kJ
Therefore, the ΔH for the reaction [tex]NO (g) + O (g) = > NO^2[/tex] (g) is:
(-199 kJ) + (-142 kJ) + (495 kJ) = 154kJ
First, we need to reverse the third reaction:
[tex]2O (g) = > O^2[/tex] (g), ΔH = -495 kJ
Now, we can add the first and the reversed third reactions to cancel out the O2 term and get the given reaction:
[tex]NO (g) + 2O (g) = > NO^2 (g)[/tex], ΔH = -199 kJ - (-495 kJ) = +296 kJ
Finally, we can use the second reaction to convert the ozone term to oxygen:
[tex]O^3 (g) = > 3O^2 (g)[/tex], ΔH = -142 kJ (multiply by 3 to cancel out the O2 term)
[tex]3O (g) = > O^3 (g)[/tex], ΔH = +142 kJ (reverse the equation)
Adding this equation to the previous one, we get:
[tex]NO (g) + O (g) = > NO^2 (g)[/tex], ΔH = +296 kJ + (-142 kJ) = 154 kJ
The ΔH for the given reaction is 154 kJ.
For more question on reactions click on
https://brainly.com/question/11231920
#SPJ11
The density of air at ordinary atmospheric pressure and 25 ∘C is 1.19 g/L . What is the mass of the air in a room that measures 11.5×17.5×9.0ft ?
The mass of the air in the room is approximately 5.65 kg.
To solve the problem, we need to convert the dimensions of the room from feet to liters, then use the density of air to calculate the mass of the air in the room.
First, let's convert the dimensions of the room from feet to liters:
1 ft = 0.3048 m
1 m^3 = 1000 L
So, the volume of the room in liters is:
V = (11.5 ft) × (17.5 ft) × (9.0 ft) × (0.3048 m/ft)^3 × (1000 L/m^3)
= 4740 L
Now, we can use the density of air to calculate the mass of the air in the room:
mass = density × volume
= 1.19 g/L × 4740 L
= 5646.6 g
≈ 5.65 kg
For more question on mass click on
https://brainly.com/question/30459977
#SPJ11
What is the mass of 3.01x 1022 molecules of phosphorus, P4 ? {R.AM for phosphorus is 31} *
what happens during an exothermic reaction
Answer:
During an exothermic reaction, energy is released from the reacting system into the surrounding environment in the form of heat, light, or sound. This means that the products of the reaction have less energy than the reactants, and the overall change in enthalpy (∆H) of the system is negative.
Examples of exothermic reactions include combustion (burning of fuel), oxidation reactions, neutralization reactions, and many types of chemical reactions. In each case, the reaction releases heat or light as a result of the formation of new chemical bonds, which releases energy.
Exothermic reactions are important in many fields, including chemistry, physics, and engineering. They are used in everyday applications such as the burning of fuel in car engines, the production of heat and light from a match or a firework, and the generation of electricity from nuclear reactions.
Explanation:
Why is it important to monitor pollutants in watershed?
monitoring pollutants in a watershed is critical for protecting human health, aquatic ecosystems, and the environment.
It provides valuable information for decision-making, compliance with environmental regulations, and early warning of potential environmental problems.
Monitoring pollutants in a watershed is important for several reasons:
Protecting human health: Polluted water can pose serious health risks to humans.
Protecting aquatic ecosystems: Polluted water can harm aquatic plants and animals.
Compliance with environmental regulations: Polluted water can violate environmental regulations and harm the reputation of businesses and organizations.
Early warning of environmental problems: Monitoring pollutants in a watershed can provide early warning of potential environmental problems. This can help officials take preventive measures to protect the environment and public health before serious problems occur.
learn more about pollutant here:
https://brainly.com/question/28519286
#SPJ4
explain the difference between a mixture of a element and a compound made of elements. Write about atom in your answer
Answer:
A mixture of an element and a compound made of elements are two different types of combinations of matter.
An element is a substance that cannot be broken down into simpler substances by chemical means. Atoms are the smallest units of elements that still retain their properties. For example, gold is an element with the symbol Au, and its atoms cannot be broken down into simpler substances without losing their properties.
A compound, on the other hand, is a substance made up of two or more different elements chemically combined in a fixed ratio. For example, water is a compound made up of two hydrogen atoms and one oxygen atom, with the chemical formula H2O.
A mixture of an element and a compound is a combination of two or more substances that are physically mixed together, but not chemically combined. The substances in the mixture retain their individual properties and can be separated by physical means, such as filtering or evaporation. For example, a mixture of salt (a compound) and iron filings (an element) can be physically separated by using a magnet to attract the iron filings, leaving the salt behind.
In summary, the difference between a mixture of an element and a compound made of elements is that the former is a physical combination of two or more substances that retain their individual properties, while the latter is a chemical combination of two or more elements in a fixed ratio that results in a new substance with its own distinct properties.
What are the two things that is difficult using a 4 beam balance
A four-beam balance is a laboratory instrument used to measure the mass of an object.
Although this kind of balancing is relatively easy to use and accurate, there are a few difficulties with it:
The scale's precise value can be challenging to read. A four-beam balance's beams might be challenging to read precisely, mainly if the value is in the middle of two markings. Especially for small or light things, this can make it challenging to take precise measurements.
Manual adjustment is needed. The user must manually reposition the beams until they balance in order to use a four-beam balance. This process can take a while, especially when dealing with things whose weight or shape is asymmetrical. To maintain accurate readings, the balance might also need to be adjusted on a regular basis.
Overall, a four-beam balance has limitations that can make it challenging to use in some circumstances, even if it can be a valuable tool for determining the mass of things in a laboratory.
To learn more about Beam balance:
https://brainly.in/question/11158465
A 4 beam balance is a type of weighing scale that typically consists of four beams: two counterbalancing beams, a center beam, and a rider.
The center beam and the rider are used to indicate the weight of the object being weighed. While a 4 beam balance is a relatively simple instrument, there are a few things that can make using it difficult:
Reading the scale: One of the most challenging aspects of using a 4 beam balance is reading the scale accurately. The rider must be moved along the center beam until it balances with the object being weighed. This process can be tricky, as the rider can be very sensitive to even the slightest movements.
Calibration: Another potential difficulty with using a 4 beam balance is calibration. Over time, the scale may become unbalanced or the beams may become bent, which can cause inaccurate readings.
Calibrating the scale can be a time-consuming and delicate process, requiring a steady hand and a good eye for detail. If the scale is not calibrated properly, it may not provide accurate measurements, which can be a problem if precise weights are needed.
Learn more about beams here:
https://brainly.com/question/21441738
What inferences can you make about how heat travels in terms of surface currents?
Heat travels through surface currents in a process known as convection.
Convection occurs when heat is transferred through a fluid or gas, such as air or water, through the movement of the fluid or gas itself. In this process, warmer, less dense fluid or gas rises, while cooler, denser fluid or gas sinks. This creates a continuous flow or current, which transfers heat from one place to another. Therefore, we can infer that heat travels through surface currents by the transfer of energy through the movement of fluids or gases. Convection is an important process in the transfer of heat because it can occur in fluids or gases that are otherwise stationary, such as the air in a room or the water in a pot on a stove.
learn more about convection here:
https://brainly.com/question/4138428
#SPJ4
The temperature of an ideal gas in a sealed container of volume V is increased from T to 3T. What will happen to the pressure, P of this gas?
a. It increases from P to 2P
b. There is no change
c. It increases from P to 3P.
d. It decreases from P to P/3
The temperature of an ideal gas in a sealed container of volume V is increased from T to 3T. The pressure, P of this gas increases from P to 3P. The correct answer is c.
According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature.
If the volume and number of moles of gas are kept constant, then the equation can be simplified to P/T = nR/V. This means that the pressure of the gas is directly proportional to its temperature.
If the temperature of the gas is increased from T to 3T, then the pressure will also increase by a factor of 3. Therefore, the pressure will increase from P to 3P.
So the correct answer is c. It increases from P to 3P.
For more question on gas law click on
https://brainly.com/question/27870704
#SPJ11
............ is an electrolyte, as is any soluble ionic compound.
-Sodium chloride
-sugar
-glucose
-alcohol
Answer:
Sodium chloride
Explanation:
Sodium chloride is an electrolyte, as is any soluble ionic compound.
Sugar, glucose, and alcohol are not electrolytes because they do not dissociate into ions when dissolved in water. Instead, they remain as intact molecules.