Answer:
I do believe her actions were justified.
Explanation:
Due to the school charging extra fee from her father who makes a modest amount as a teacher. There was sum of money involved that could change how he lived and her.
I do not believe her actions where justified
She had a lot going for her. She could have skipped the hardship of helping grace and pass. She could have easily have gotten a good job with a degree and paid back all the debts owed. Alot of troubles could have been avoided just by doing her own thing.
A wheelbarrow is pushed 10 meters with a force of 75 N for 30 seconds. What is the work done?
How much power is needed?
How much force does it take to give a 70 kg object an acceleration of 20 mls2
Answer:
heyy
Explanation:how r uuu
please help me out with these !! 50 points would greatly appreciate it.
Answer:
Its nymber 2
Explanation:
Why can’t a real machine ever have 100% efficiency
Answer:
Almost all machines require energy to offset the effects of gravity, friction, and air/wind resistance. Thus, no machine can continually operate at 100 percent efficiency.
what are the precautions to be taken while performing a rectangular glass prism experiment
Answer:
PRECAUTIONS
-The refracting faces of the glass prism should be smooth, transparent and without any air bubble or broken edge. ...
-Use a sharp pencil to draw boundary of the prism and rays of light.
-The alpins should have sharp tip and should be fixed exactly vertical to the plane of the paper.
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
Which of the following variables can be measured in joules?
A. momentum
B. Energy
C. Power
D. Work
Answer:
The variables that can be measured in joules are
B. Energy
D. Work
Hope it will help :)
Suppose a car is traveling at 22.8 m/s, and the driver sees a traffic light turn red. After 0.404 s has elapsed (the reaction time), the driver applies the brakes, and the car decelerates at 9.00 m/s2. What is the stopping distance of the car, as measured from the point where the driver first notices the red light?
Answer:
38.09 m
Explanation:
We'll begin by calculating the distance travelled by the car during the reaction time. This can be obtained as follow:
Reaction time (tᵣ) = 0.404 s
Initial velocity (u) = 22.8 m/s,
Distance travelled during the reaction time (sᵣ) =?
sᵣ = utᵣ
sᵣ = 22.8 × 0.404
sᵣ = 9.21 m
Next, we shall determine the distance travelled by the car when the brake was applied. This can be obtained as follow:
Initial velocity (u) = 22.8 m/s
Acceleration (a) = –9 m/s² (since the car is decelerating)
Final velocity (v) = 0 m/s
Distance travelled when the brake was applied (s₆) =?
v² = u² + 2as₆
0² = 22.8² + (2 × –9 × s₆)
0 = 519.84 – 18s₆
Collect like terms
0 – 519.84 = –18s₆
–519.84 = –18s₆
Divide both side by –18
s₆ = –519.84 / –18
s₆ = 28.88 m
Finally, we shall determine the stopping distance of the car, as measured from the point where the driver first notices the red light. This can be obtained as follow:
Distance travelled during the reaction time (sᵣ) = 9.21 m
Distance travelled when the brake was applied (s₆) = 28.88 m
Stopping distance =?
Stopping distance = sᵣ + s₆
Stopping distance = 9.21 + 28.88
Stopping distance = 38.09 m
A single, monochromatic indigo light source is shined through an etched, flat prism with a slit separation of .0250mm. The resulting interference pattern is viewed on a screen 1.25m away. The third maximum is found to be 6.6cm from the central maximum. What is the wavelength of the indigo light
Answer:
λ = 440 nm
Explanation:
The phenomenon of constructive interference is described by the expressions
d sin θ= m λ (1)
where d is the separation of the slits d = 0.0250 mm = 2.50 10⁻⁵ m, lam is the wavelength of the incident radiation and m is an integer indicating the order of interference
let's use trigonometry to find the angle
tan θ = y / L
where L is the distance to the screen L = 1.25 m
in general interference experiments angles are very small
tan θ = [tex]\frac{sin \ \theta }{cos \ \theta}[/tex]
ten θ = sin θ
substituting
sin θ = y / L
we substitute 1
d y / L = m λ
λ = [tex]\frac{ d \ y }{m \ L}[/tex]
in the exercise indicate
m = 3
y = 6.6 cm = 6.6 10-2 m
we calculate
λ = 2.50 10⁻⁵ 6.6 10⁻² /( 3 1.25)
λ = 4.4 10⁻⁷ m
let's reduce to nm
λ = 4.4 10⁻⁷ m (10⁹ nm / 1 m)
λ = 440 nm
A wave in which the movement of the wave is perpendicular to the movement of the wave traveling through the medium-compression wave (longitudinal wave)
True or false?
Answer:
I'm rusty sorry if I'm wrong but true?
You are on the Pirates of the Caribbean attraction in the Magic Kingdom at Disney World. Your boat rides through a pirate battle, in which cannons on a ship and in a fort are firing at each other. While you are aware that the splashes in the water do not represent actual cannonballs, you begin to wonder about such battles in the days of the pirates. Sup-pose the fort and the ship are separated by 75.0 m. You see that the cannons in the fort are aimed so that their cannon-balls would be fired horizontally from a height of 7.00 m above the water.
(a) You wonder at what speed they must be fired in order to hit the ship before falling in the water.
(b) Then, you think about the sludge that must build up inside the barrel of a cannon. This sludge should slow down the cannonballs. A question occurs in your mind: if the can-nonballs can be fired at only 50.0% of the speed found ear-lier, is it possible to fire them upward at some angle to the horizontal so that they would reach the ship?
Answer:
a) v₀ₓ = 62.76 m / s, b) θ₁ = 17.6º, θ₂ = 67.0º
Explanation:
We can solve this exercise using the projectile launch ratios
a) Let's find the time it takes for the bullet to reach the water level
y = y₀ + v_{oy} t - ½ g t²
when it reaches the water its height is zero y = 0, as the bullet is fired horizontally its initial vertical velocity is zero
0 = y₀ + 0 - ½ g t²
t =[tex]\sqrt{2y_o/g}[/tex]
t = [tex]\sqrt{2 \ 7 /9.8}[/tex]
t = 1,195 s
now we can calculate the speed with the horizontal movement
x = v₀ₓ t
v₀ₓ = x / t
v₀ₓ = 75.0 / 1.195
v₀ₓ = 62.76 m / s
b) if the speed of the bullets is half of that found
v₀ = 62.76 / 2 = 31.38 m / s
let's write the expressions for the distance
x = v₀ cos θ t
y = y₀ + v_{oy} sin θ t - ½ g t²
t = [tex]\frac{x}{v_o \ cos \theta}[/tex]
we substitute
[tex]0 = y_o + v_o sin \theta \ \frac{x}{v_o \cos \thetay} - 1/2 g \ (\frac{x}{v_o \ cos \theta})^2[/tex]
[tex]0 = y_o + x tan \theta - \frac{1}{2} g \ \frac{x^2}{ v_o^2 \ cos^2 \theta}[/tex]
let's use the identified trigonometry
sec² θ = 1 + tan² θ
sec θ = 1 / cos θ
we substitute
[tex]0 = y_o + x tan \theta - \frac{g x^2}{2 v_o^2} ( 1 + tan^2 \theta)[/tex]
[tex]\frac{g x^2}{2v_o^2} tan^2 \theta - x tan \theta + \frac{gx^2}{2v_o^2} - y_o = 0[/tex]
we change variable
tan θ = H
[tex]\frac{gx^2}{2 v_o^2 } H^2 - x H + \frac{gx^2}{2v_o^2}-y_o =0[/tex]
we subtitle the values
[tex]\frac{9.8 \ 75^2}{2 \ 31.38^2} H^2 - 75 H + \frac{9.8 \ 75^2}{2 \ 31.38^2}-7 =0[/tex]
27.99 H² - 75 H + 20.99 = 0
H² - 2.679 H + 0.75 = 0
we solve the quadratic equation
H = [2.679 ± [tex]\sqrt{2.679^2 - 4 0.75}[/tex]] / 2
H = [2,679 ± 2,044] / 2
H₁ = 0.3175
H₂ = 2.3615
now we can find the angles
H₁ = tan θ₁
θ₁ = tan⁻¹ H₁
θ₁ = tan⁻¹ 0.3175
θ₁ = 17.6º
θ₂ = 67.0º
for these two angles the bullet hits the boat
A 3" diameter germanium wafer that is 0.020" thick at 300K has 1.015 x 10^17 As atoms added to it. What is the resistivity of the wafer? Germanium has 4.42 x10^22 atoms/cc, electron and hole mobilities are 3900 and 1900 cm^2/(V*s). What is the resistivity of the Ge in ohm*microns?
Answer:
0.546 ohm / μm
Explanation:
Given that :
N = 1.015 * 10^17
Electron mobility, u = 3900
Hole mobility, h = 1900
Ng = 4.42 x10^22
q = 1.6*10^-19
Resistivity = 1/qNu
Resistivsity (R) = 1/(1.6*10^-19 * 1.015 * 10^17 * 3900)
= 0.01578880889 ohm /cm
Resistivity of germanium :
R = 1 / 2q * sqrt(Ng) * sqrt(u*h)
R = 1 / 2 * 1.6*10^-19 * sqrt(4.42 x10^22) * sqrt(3900*1900)
R = 1 /0.0001831
R = 5461.4964 ohm /cm
5461.4964 / 10000
0.546 ohm / μm
The superheroine Xanaxa, who has a mass of 65.1 kg , is pursuing the 78.7 kg archvillain Lexlax. She leaps from the ground to the top of a 153 m high building then dives off it and comes to rest at the bottom of a 17.5 m deep excavation where she finds Lexlax and neutralizes him. Does all this bring about a net gain or a net loss of gravitational potential energy
Answer:
There is net loss of gravitational energy .
Explanation:
When Xanaxa is on the ground , her potential energy is assumed to be zero . When she leaps to a height of 153 m , she gains gravitational energy . When she dives and reaches the surface , she loses potential energy and on reaching the ground her potential energy becomes zero . When she further goes down inside ground to a depth of 17.5 m , she loses potential energy further . Her potential energy becomes less than zero or negative .
Ultimately her potential energy changes from zero to negative in the whole process . So there is net loss of potential energy .
A clump of soft clay is thrown horizontally from 9.80 m above the ground with a speed of 20.0 m/s. Assume it sticks in place when it hits the ground At what time will the clay hit the ground
Answer:
Explanation:
The time to hit the ground will be same as time taken to fall from the height of 9.8 m with initial vertical velocity of zero .
Considering vertical displacement
initial velocity u = 0
displacement s = 9.8 m
acceleration a = g = 9.8 m /s²
time t = ?
s = ut + 1/2 g t²
9.8 = 0 + .5 x 9.8 x t²
t² = 2
t = √2 = 1.4 s
Which is an advantage of storing data digitally?
A. It is easy to change the data if you have the right computer
programs.
B. It is easy to copy a computer virus to a device along with the data.
C. The quality of copies decrease as more copies are made.
D. Other people can access personal data from unsecured devices.
Answer:
A
Explanation:
Because I said so
Answer:
A
Explanation:
i took the test and got it right please mark me ❤️
On a level test track, a car with antilock brakes and 90% braking efficiency is determined to have a theoretical stopping distance (ignoring aerodynamic resistance) of 408 ft (after the brakes are applied) from 100 mi/h. The car is rear-wheel drive with a 110-inch wheelbase, weighs 3200 lb, and has a 50/50 weight distribution (front and back), a center of gravity that is 22 inches above the road surface, an engine that generates 300 ft-lb of torque, and overall gear reduction of 8.5 to 1 (in first gear), a wheel radius of 15 inches and a driveline efficiency of 95%. What is the maximum acceleration from the rest of this car on this test track
Answer:
a = 30.832 ft/s²
Explanation:
To solve this problem let's start by finding the braking acceleration using kinematics, where the distance is x = 408 ft, the initial velocity vo = 100 mi / h and the final velocity is zero v = 0
v² = v₀² - 2 a x
0 = v₀² - 2ax
a = [tex]\frac{v_o^2}{2x}[/tex]
Let's start by reducing the magnitudes to ft / s
v₀ = 100 mi / h (5280 foot / 1 mile) (1h / 3600 s) = 146.666 ft / s
let's calculate
a = [tex]\frac{146.66^2}{2 \ 408}[/tex]
a = 26.36 ft / s²
Let's call this acceleration a_effective, this acceleration is in the opposite direction to the speed of the vehicle.
Let's use a rule of three (direct proportions) to find the acceleration applied by the brake system (a1) which has an efficiency of 95%. or 0.95
a₁ = [tex]\frac{a_e}{0.95}[/tex]
Let's use another direct proportion rule If the acceleration of the brake system (a₁) for an applied acceleration (a) with an efficiency of 0.90
a = [tex]\frac{a_1}{0.90}[/tex]
we substitute
a = [tex]\frac{a_e}{0.95 \ 0.90}[/tex]
let's calculate
a = [tex]\frac{26.36}{ 0.95 \ 0.90}[/tex]
a = 30.832 ft/s²
This is the maximum relationship that the vehicle can have for when it brakes to stop at the given distance
What is the symbol for carbonate ?
what kind of lens curve inward toward its center
Answer:
A concave lens is exactly the opposite with the outer surfaces curving inward, so it makes parallel light rays curve outward or diverge. That's why concave lenses are sometimes called diverging lenses.
Answer: A concave lens
A concave lens is exactly the opposite with the outer surfaces curving inward, so it makes parallel light rays curve outward or diverge. That's why concave lenses are sometimes called diverging lenses.
Hopes this helps :)
Iron has a specific heat of o.45 J/g °C. Removing -1.16 E 2 J of energy lowered the temperature of iron from 89 °C to 26.41 °C. What was the mass of the iron?
Answer:
m = 4.11 grams
Explanation:
Given that,
The specific heat of Iron, c = 0.45 J/g°C
Heat removed, [tex]Q=1.16\times 10^2\ J[/tex]
Initial temperature, [tex]T_i=89^{\circ} C[/tex]
Final temperature, [tex]T_f=26.41^{\circ} C[/tex]
We need to find the mass of the iron. We know that the heat removed in terms of specific heat is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{-1.16\times 10^2}{0.45\times (26.41-89)}\\\\m=4.11\ g[/tex]
So, the mass of the iron is 4.11 grams.
6th grade science I mark as brainliest !
Answer:
first is Atoms
4) is True
a. Use the graph and the element made in question 2 to determine the mass of the star.
A 200-N force acts on a 10-kg object. The acceleration of the object is
a point charge q1 = 2.40 uC is held stationary at the origin. A second point charge q2 = -4.30uC moves from the point x= .150 m, y= 0.0 m, to the point x = .250 m, y= 0.0m
a) what is the charge in potential energy of the pair of charges?
b) How much work is done by the electric force on q2
Answer:150M
Explanation:
WILL GIVE BRAINLIEST!!
What is a way to transfer charge in which an object becomes polarized?
Answer:
I answered Number 4 (Solids and Elasticity)
Explanation:
solids and elasticity
Orion, also called the Hunter, has three stars that make up Orion's belt.
Which star is at the tip of the arrow? PLEASE HELP I NEED THIS FAST
A. Sirius
B. Betelgeuse
C. Rigel
D. Polaris
Answer - B. Betelguese.
I really hope this helps!!
Which subatomic particle is NOT found in the nucleus of an atom? *
protons
neutrons
electrons
Answer:
Electrons
Explanation:
Only Protons and Neutrons are found in the nucleus
Thomas knows that many machines transform electrical energy into other forms of energy
Answer:
Only the car transforms electrical energy into more than one form of energy.
Explanation:
The motion of the car is mechanical energy but it can also transform into another energy witch is electrical energy
Which of these is an effect of gravity?
А
A cup placed on a table won't float away.
B
You can throw a ball or a rock up.
С
The brakes on a bike can make it stop.
D
Liquid water can become a gas.
Answer:
(A)
A cup placed on a table won't float away
A ball is rolling with a constant acceleration of 13 m/s starting from rest. How long will it take to increase its velocity to a final speed of 62 m/s?
Time taken : 4.77 s
Further explanationGiven
a = 13 m/s²
vf = final velocity = 62 m/s
Required
time taken
Solution
An equation of uniformly accelerated motion
[tex]\large {\boxed {\bold {x=xo+vo.t+\frac {1} {2} at ^ 2}}}[/tex]
vf = vo + at
vf² = vo² + 2a (x-xo)
x = distance on t
vo / vi = initial speed
vt / vf = speed on t / final speed
a = acceleration
Input the value :
vo =0 ⇒from rest
vf=at
62 m/s = 13 m/s².t
t = 62 : 13
t = 4.77 s
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would....
A Increase
B Decrease
C Stay the Same
D Vary with day and night
Answer:The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would..
Explanation: It would decrease.
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would decrease because the acceleration due by gravity on the moon is less than the acceleration due to gravity on the earth, therefore the correct answer is option C.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another.
In comparison to the Earth, the Moon is less massive. Your weight would drop if you traveled to the moon because the acceleration caused by gravity there is lower than that caused by gravity here on Earth.
As a result of the less gravity on the moon, the weight would decrease.
Thus, the correct answer is option C.
To learn more about gravity from here, refer to the link;
brainly.com/question/4014727
#SPJ2
a sensor light installed on the edge of a home can detect motion for a distance of 50 feet in front and with a range of motion of 200 degrees. what is the arc length of the area covered
Answer:
4363.3231 feets²
Explanation:
Given that :
Distance, r = 50 ft
θ = 200°
The arc length of area covered :
Arc length = θ/360° * πr²
Arc length = (200/360) * 50 ft ^2 * π
Arc length = 0.5555555 * 2500 * π
Arc length = 4363.3231 feets²