2 X(9) + Y (9) = 2XY (9)
A reversible reaction is represented by the equation above. The amounts of reactants and products at time 1 are shown in the particle diagram on the left. The particle diagram on the right shows the
amounts of reactants and products at time 2. Based on the diagrams, what can be inferred about the relative rates of the forward and reverse reactions between time 1 and time 2?
a. nothing can be inferred because the total number of X and Y atoms is the same
each diagram
b. Nothing can be inferred because the temperature of the system may have been changed
c. The rate of the reverse reaction is greater than the rate of the forward reaction
d. The rate of the forward reaction is greater than the rate of the reverse reaction.
Answers
Answer:
The answer is D. The rate of the forward reaction is greater than the rate of the reverse reaction.
Explanation:
The forward reaction rate was greater than the reverse reaction rate because more product is present at time 2. This is the answer from ap classroom.
The given reaction has been inferred the increased rate of forward reaction than reverse reaction. Thus, option D is correct.
The chemical reaction has been given by the combination of reactants for the formation of product. The reactants combine in the fixed proportion to form the product.
The rate of reaction has been defined as the rate of formation of product or the disappearance of reactants.
Rate of reactionThe forward reaction has been given as the rate of formation of product. The reverse reaction has been given as the rate of dissociation of product.
In the given condition, the number of reactant at time 1 are more than the reactant at time 2. This states that there has been increased formation of the product at time 2.
Thus, the given reaction has been inferred the increased rate of forward reaction than reverse reaction. Thus, option D is correct.
Learn more about reverse reaction, here:
https://brainly.com/question/8592296
Related Questions
the substance that can not be further decomposed by ordinary chemical means is
A.water
B.gold
C.sugar
D.air
Answers
who is princess tianas best friend, if you can get her name right then ill give you brainliest
Answers
Answer:
Oo i think her name is Tiana..... ❤️❤️Answer:
Charlotte La Bouff
Explanation:
"Lottie" if you will
What is the formula for nickel || dichromate
Answers
Answer: Cr2NiO7 is the molecular formula for nickel II dichromate.
What are land plants used for?
Answers
Answer:
Land plants are also known as Embryophytes. Embryophytes are complex multicellular eukaryotes with specialized reproductive organs. The name derives from their innovative characteristic of nurturing the young embryo sporophyte during the early stages of its multicellular development within the tissues of the parent gametophyte.
Explanation:
Answer:
there used for mountains , wait I'm just trynna get points ya feel me
Explanation:
What mass of CO2 would you need so that you had 2.5 moles of it?
A:44g
B: 88g
C. 110g
D: 132g
Answers
if I have a +2 oxidation number do I give up or accept electrons?
Answers
Answer:
I will give up the electrons
Explanation:
Consider the following rules:
1. An atom loses electrons if its oxidation number is positive.
2. An atom gains electrons if its oxidation number is negative.
3. An atom neither gains nor loses electrons if its atomic number is zero.
As I have an oxidation number [tex]+2[/tex] that is oxidation number is positive, so, I will give up electrons.
An equimolar mixture of X (g) and Y (g) is placed inside a rigid container at constant temperature. The particle diagram above represents the changes that occur over time. Based on the particle
diagram, which of the following best predicts whether or not the system has reached equilibrium by 300 s?
a. It is not possible to determine that the system has reached equilibrium by 300 s because the stoichiometry of the reaction is not known.
b. it is not possible to determine that the system has reached equilibrium by 300 s because the amounts of X, Y, and XY have continued to change
c. The system has reached equilibrium by 300 s because the rate of formation of XY is constant
d. The system has reached equilibrium by 300 s because the rates of consumption of X and Y are equal
Answers
Answer:
B
Explanation:
t= 300s has more XY than t=200s, which means that it continues to change
*i think
The system has been predicted to be not possible to reach equilibrium as changing X and Y concentration. Thus, option B is correct.
Equilibrium has been described as the condition in the reaction mixture, when the concentration of the product and the reactant are equal.
The given reaction has been represented as:
[tex]\rm X+Y\rightarrow\;XY[/tex]
Reaction mixture at 300 sThe given reaction has been represented as, with the increase in time, there has been the consumption of the reactant and the formation of product.
The concentration has been continuously changing with time. Thus, the determination of the equilibrium has been difficult with changing X and Y concentration.
Thus, option B is correct.
Learn more about equilibrium concentration, here:
https://brainly.com/question/7949757
The parts of the Earth that contain living organisms
Answers
Answer:
Biosphere
The Biosphere --contains all the planet's living things. This sphere includes all of the microorganisms, plants, and animals of Earth. Within the biosphere, living things form ecological communities based on the physical surroundings of an area.
Explanation:
Answer:
Biosphere
Explanation:The Biosphere --contains all the planet's living things. This sphere includes all of the microorganisms, plants, and animals of Earth. Within the biosphere, living things form ecological communities based on the physical surroundings of an area. hope this helps (:
How many electrons are being shared between the two carbon atoms in the covalent compound ethyne? Ethyne has the structure: H−C≡C−H
Answers
Answer:
Three lines between the carbon atoms in the Lewis structure represent three covalent bonds. Each covalent bond is a shared pair of electrons, hence there are six electrons being shared between the carbon atoms in ethyne.
The number of electrons that are being shared between the two carbon atoms in the covalent compound ethyne is six.
What are covalent bonds?Covalent bond are formed by the sharing of electrons between two atoms.
In ethyne molecule two carbon atoms are present and between two carbon atoms three covalent bonds are present. And each covalent bond is formed by the sharing of two electrons. So three covalent bonds are formed by the sharing of 6 electrons.
Hence in ethyne 6 electrons are being shared.
To know more about covalent bond, visit the below link:
https://brainly.com/question/12732708
#SPJ2
Single displacement (replacement)
Answers
Explanation:
Single displacement (replacement) is kind of reaction in which 1 atom of reactants only change in product.
how many valence electrons does hydrogen have
Answers
Answer:
Since hydrogen is the first element, its electron configuration is 1s1.
Explanation:
It has only one electron in its valence shell.
Valence electrons are the outermost electrons or electrons in the largest energy level. Hydrogen has only one electron, so that electron is a valence electron.
Answer:
One valence electron !!
Explanation:
Has 3 valence electrons and 4 energy levels ?
Answers
You are looking for an element in the fourth period and a transition metal. As most have about 3 valence electrons. Gallium and Scandium work perfectly.
Answer:
Gallium is the Answer.
Explanation:
Which of the following has the smallest atomic radius?
a B
b Al
c F
d N
e Ga
Answers
Answer:
c. F
Explanation:
As you go top to bottom down a column of the periodic table, atomic radius increases.
As you go left to right across a period of the periodic table, atomic radius decreases.
Knowing this trend, that means that the smallest atomic radius would be located in the top right of the periodic table. The closest element to that point is fluorine, or answer C.
Why does heating an object increases its thermal energy?
Answers
Answer:
the average kinetic energy of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
Use the periodic table to determine which of the
following could be an isotope of bromine (Br).
Check all that apply.
Z = 79, A = 196
Z = 35, A = 79
A = 79, N =44
D Z = 44, N = 44
DONE
Answers
describe a difference in our inner planets and outer planets
Answers
How does Natural selection lead to the Evolution of bacteria?
Answers
Answer:
Bacteria can evolve quickly because they reproduce at a fast rate.
Explanation:
Bacteria can evolve quickly because they reproduce at a fast rate. Mutations in the DNA of bacteria can produce new characteristics. A random mutation might cause some bacteria to become resistant to certain antibiotics, such as penicillin.
Convert 0.6330 mol of Na3PO4 to grams. Show the unit analysis by inserting the correct components into their unit- factor slots.
(see picture)
Answers
Answer:
No of moles = mass in gram / molar mass
Mass in gram = no of moles× molar mass
Mass in gram = 0.6330× 163.94
103.77 gram
Explanation:
Remember! All ___________________________ are __________________________
but not all Atoms are elements.
Answers
Answer:
all element are atom but all at all atom are element
Explanation:
because all atoms of an element are same whereas atom of different element are different
What volume, in liters, does 128 grams of O2 occupy at STP?
89.6 L
22.4 L
67.2 L
44.8 L
Answers
Answer: 89.7 L
Explanation:
89.6 volume, in liters, does 128 grams of O2 occupy at STP. Therefore, option A is correct.
What do you mean by volume ?A volume is simply the amount of space taken up by any three-dimensional solid. A cube, a cuboid, a cone, a cylinder, or a sphere are examples of solids. Volumes differ depending on the shape.
Every three-dimensional object requires some amount of space. The volume of this space is measured. Volume is defined as the space occupied by an object within the boundaries of three-dimensional space. It is also known as the object's capacity.
1 mole Oxygen has mass 32 grams
Mole of Oxygen in 128 g mass = 128 g / 32 g/mol
= 4.0 mol O2
At Standard temperature and pressure this has volume
= 4.0 mol × 22.4 L/mol
= 89.6 L
Thus, 89.6 volume, in liters, does 128 grams of O2 occupy at STP, option A is correct.
To learn more about the volume, follow the link;
https://brainly.com/question/1578538
#SPJ6
define sedimentary, metamorphic, igneous
Answers
Answer:
these are all types of rocks
sedimentary are formed through the accumalation of different material from earths surface. Like the grand Canyon!
Metamorphic rocks are formed from heat, preasure, or a combination. Found mostly near tectonic plates meet.
Igneous are molten rock.
Explanation:
Sedimentary- a rock that has formed from sediment deposited by water or air
Metamorphic- a rock that has transformed by heat,pressure,or other natural causes
Igneous- a rock that has been solidified by lava or magma
which one of these is NOT a unit for a reaction rate. 1) g/mL 2) M/min
Answers
G/ml is not a unit of time this the answer
1) how can you make a solution more concentrated
Answers
Explanation:
solvent bc when you remove it it becomes more concentrate
A mixture of metals with properties different than the metals by themselves is called a(n) __________.
Answers
Answer:
Alloy
Explanation:
What are the 2 basic parts of an atom?
Answers
Answer:
nucleus and electrons
Explanation:
nucleus contains protons and neutrons
I NEED HELP ASAP PLS
picture included^^^^^^ ^^
brainliest;) ^
Answers
Explanation:
20g of Na and 10g of Cl2 which is in excess?
The equation of the reaction is given as;
2 Na + Cl2 --> 2 NaCl
From the equation;
2 mol of Na reacts with 1 mol of Cl2
Converting the masses of reactants given to mol
Number of moles = Mass / Molar mass
Na;
Number of moles = 20 / 23 = 0.8696 mol
Cl2;
Number of moles = 10 / 71 = 0.1408 mol
In the chemical equation, the ratio was 2: 1 however with the masses, we can tell that Na is in by far excess.
0.8696 mol of Na would require 0.4348 of Cl2 (Present = 0.1408 mol)
This means;
Na - Excess Reactant
Cl2 - Limiting Reactant
Second part; How much NaCl would be produced?
The limiting reactant determines how much of the product is formed.
From the equation of the reactant;
1 mol of Cl2 produces 2 mol of NaCl
0.1408 mol of Cl2 would require x mol of NaCl
1 = 2
0.1408 = x
x = 0.2816 mol of NaCl
Converting to mass;
Mass = Molar Mass * Number of moles
Mass = 58.44 g/mol * 0.2816 mol
Mass = 16.46 g
How many moles is 118 grams of Argon
Answers
Answer:
[tex]\boxed {\boxed {\sf About \ 2.96 \ moles \ of \ Argon}}[/tex]
Explanation:
To convert from grams to moles we must use the molar mass, which is found on the Periodic Table.
Argon: 39.9 g/molUse the molar mass as a ratio.
[tex]\frac{39.9 \ g \ Ar}{1 \ mol \ Ar}[/tex]
Multiply by the given number of grams: 118
[tex]118 \ g \ Ar *\frac{39.9 \ g \ Ar}{1 \ mol \ Ar}[/tex]
Flip the fraction so the grams of argon will cancel each other out.
[tex]118 \ g\ Ar * \frac{1 \ mol \ Ar}{39.9 \ g \ Ar}[/tex]
[tex]118 * \frac{ 1 \ mol \ Ar}{39.9 \ g \ Ar}[/tex]
[tex]\frac {118 \ mol \ Ar }{ 39.9 }[/tex]
[tex]2.95739348 \ mol \ Ar[/tex]
The original measurement of grams had 3 significant figures, so our answer must have 3 sig figs.
For the number we calculated, that is the hundredth place. The 7 in the thousandth place tells us to round the 5 to a 6.
[tex]2.96 \ mol \ Ar[/tex]
There are about 2.96 moles of Argon in 118 grams.
the law of conversation of mass states that the mass of the reactant is ___ the mass of products
Answers
Answer: equal to
Explanation:
How many electrons will strontium lose to satisfy the octet rule?
Answers
Answer:
Two Electrons.
Explanation:
Strontium is the atom with atomic number 38, and electron configuration is [Kr] 5S^2 which mean just two electrons more than Krypton which one of the Noble gases.
Cobalt(II)chloride is commonly obtained from chemical supply houses as a hydrate with the formula CoCl2.6H2O. An analysis showed that 25.0g of this hydrate contains 11.3g of water. What us the present water by weight in this hydrate?
Answers
Answer:
The present water by weight for the hydrate = 45.2%
Explanation:
From the given information;
The present water by weight = (weight of the water/ total weight of the hydrate) × 100
The present water by weight = (11.3/25) × 100%
The present water by weight = 0.452 × 100%
The present water by weight for the hydrate = 45.2%