Explanation:
the pressure and temperature of the air increase
reason:
the volume of the space containing air decreases.
Explanation:
Whether you know it or not, compressed air is involved in every aspect of our lives, from the balloons at your birthday party to the air in the tires of our cars and bicycles. It was probably even used when making the phone, tablet or computer you’re viewing this on.
The main ingredient of compressed air is - you guessed it! - air. Air is a gas mixture, which means it consists of many different gases. Primarily these are nitrogen (78%) and oxygen (21%).
The temperature of the air is directly proportional to the mean kinetic energy of these molecules. This means that the air temperature will be high if the mean kinetic energy is large (and the air molecules move faster). The temperature will be low when the kinetic energy is small.
Compressing the air makes the molecules move more rapidly, which increases the temperature. This phenomenon is called “heat of compression”. Compressing air is literally to force it into a smaller space and as a result bringing the molecules closer to each other. The energy that gets released when doing this is equal to the energy required to force the air into the smaller space. In other words, it stores the energy for future use.
CH4 + 2O + CO2 + 2 H2O
If 9.65 mole of methane reacts with oxygen to produce carbon dioxide and water, what mass of water is produced?
Answer:
347.4 (19.3 mole)
Explanation:
CH4 + 2O2 = CO2 + 2H2O
1(mole) - 9.65(mole)
2(mole) - x ⇒x = 9.65*2=19.3
m=n*M ⇒ m= 19.3*(1*2+16)= 19.3*18=347.4(g)
A student draws the model shown below. Which of these best compares the conditions at Location X and Location Y?
Answer:
Explanation:
You have to use formula b to your answer
Which type of solute would have the greatest impact on a colligative property?
A. C6H12O6
B. NaCl
Given the balanced equation: 4Fe(s) + 30₂(g) → 2Fe₂O₃(s) + 1640 kJ Which phrase best describes this reaction?
A) endothermic with AH = +1640 kJ
B) endothermic with AH =-1640 kJ
C) exothermic with AH= +1640 kJ
D) exothermic with AH = -1640 k
Answer:
yeah the answer under the explanation
Explanation:
The answer is (4) exothermic with ΔH = -1640 kJ. The 1640 kJ energy is at the right side of equation means that it releases energy. The enthalpy change means the energy of production minus the energy of reactants. If it is exothermic, the ΔH < 0.
Write the name of flame used In charcoal cavity test.why?
Answer:
the reducing flame also called the carburizing flame.
Explanation:
because it gets the oxides of the unknown salts
when a rotting log was turned over, pill bugs, termites , ants , fungi , and earthworms were living there. the termites represent ____ in its
a. an environment
b. a population
c. a niche
d. an abiotic factor
Which is the correct complete ionic equation for the reaction of
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)?
a) H+(aq) + CI-(aq) + Zn(s) →
H2(g) + Zn2+(aq) + Cl-(aq)
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
c) H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
d) 2H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
Answer:
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
Explanation:
The equation is given as;
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)
In writing an ionic equation, only the aqueous compounds dissociates into ions. This means HCl and ZnCl2 would dissociate to form ions.
This is given as;
2H+ + 2Cl- + Zn(s) --> H2(g) + Zn2+ + 2Cl-
The correct option is;
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
For the balanced equation shown below, how many moles of N2 reacted, if 155 moles of NH3 are produced?
3H2 + N2 => 2NH3
Answer: 1 mole nitrogen produces 2 moles ammonia
How many moles you need for 155 mol ammonia?
155/2 moles
Explanation:
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А
base-pair substitutions and point mutations
B
silent mutations and nonfunctioning proteins
С
missense mutations and nonsense mutations
D
base-pair insertions and deletions
Answer:
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А base-pair substitutions and point mutationsB silent mutations and nonfunctioning proteins
С missense mutations and nonsense mutations
D base-pair insertions and deletions
Among the given disorders, missense mutations and nonsense mutations which mostly influences the shift in entire nucleotide.
What is mutation?A nucleotide is made of ribose sugar, phosphate groups and base pairs. Each base have a complementary base to which it pairs. If any disorder occurs in the base pairing or coding in nucleotide it is called the mutation.
A missense mutation is a sort of point mutation or single base mutation that alters the DNA by replacing one nucleotide of the codon with another nucleotide, thus changing the amino acid that is coded for in the protein.
A nonfunctional protein may emerge from the substitution of an amino acid, or the protein may not be impacted at all. Whether the mutational alterations are "conservative" or "nonconservative" will determine the functionality of the resulting protein.
It's interesting to note that the mutation is known as a nonsense mutation when the alteration in the codons nucleotide causes the development of the stop codon. The nonsense mutation causes the premature end of protein synthesis as a result of the creation of the stop codon.
To find more on mutations, refer here:
https://brainly.com/question/13923224
#SPJ2
potassium hydroxide , sodium chloride, sodium hydroxide ,calcium chloride , sodium bicarbonate write molecular formula
✧ [tex] \underline{ \underline{ \large{ \tt{A \: N \:S \: W \: E \: R}}}} : [/tex]
[tex] \underline{ \underline{ \large{ \text{Molecular \: Formulaes}}}} : [/tex]
⇾ [tex] \large{ \text{Potassium \: Hydroxide : K \: OH}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Chloride : NaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Hydroxide : NaOH}}[/tex]
⇾ [tex] \large{ \text{Calcium \: Chloride : CaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Bicarbonate} : \tt{Na ( HCO)_{ 3} }}[/tex]
---------------------------------------------------------
☥ [tex] \underline{ \underline{ \large{ \tt{ \: E \: X\: P \: L\: A\: N \: A \: T \: I \: O \: N}}} }: [/tex]
[tex] \underline{ \underline{ \text{Writing \: a \: molecular \: formula}}} : [/tex]
To write a molecular formula , the following steps are usually adopted only when we know the symbol and valencies of elements and radicals present in a molecule.
Step 1 : First , the name of the compound is written.
Step 2 : The symbols of basic and acidic radicals are written side by side.
Step 3 : The valency of each radical is written at the right upper corner of the symbol. The valency of one radical is transferred to another radical and it is written on the right hand side at the bottom corner. If necessary , L.C.M of the valencies us taken to get a simple whole number.
Step 4 : If a compound radical takes part in the molecular formula , the radical is enclosed in brackets and the valency number is written on the right side of the bracket at the bottom of the formula.
For instance :
[tex] \text{Calcium \: \: \: \: \: \: Sulphate}[/tex] [ compound ]
1. [tex] \sf{Ca \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: SO_{4} }[/tex] [ Symbol of basic and acidic radicals ]
2.We know : Valencies of calcium and sulphate are 2 and 2 respectively
3. [tex] \sf{Ca_{2} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: (SO_{4} )_{2} }[/tex] [ Valencies are exchanged and compound radical is enclosed in bracket ]
4.[tex] \sf{CaSO_{4}}[/tex] [ L.C.M is taken to get molecular formula of calcium sulphate ]
Hope I helped ! ♡
Have a wonderful day / night ! ツ
☄ Let me know if you have any questions regarding my answer !
☥ [tex] \underline{ \underline{ \mathfrak{Carry \: On \: Learning}}}[/tex] !! ✎
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
If you're wearing a yellow shirt in magenta light, what colour does the shirt look like now?
A 25.00 mL sample of the ammonia solution
was accurately diluted to 250.0 mL. A 25.00mL
aliquot of the diluted ammonia solution was
placed in a conical flask. Indicator was then added
and the solution was titrated with 0.208 molL-1
hydrochloric acid. The indicator changed colour
permanently when 19.64 mL of the acid had been
added. Calculate the concentration of ammonia in
the original solution.
Answer:
1.634 molL-1
Explanation:
The mol ration between NH3 and HCl is 1 : 1
Using Ca Va / Cb Vb = Na / Nb where a = acid and b = base
Na = 1
Nb = 1
Ca = 0.208 molL-1
Cb = ?
Va = 19.64 mL
Vb = 25.00mL
Solving for Cb
Cb = Ca Va / Vb
Cb = 0.208 * 19.64 / 25.0
Cb = 0.1634 molL-1 (Concentration of diluted ammonia solution)
Using the dilution equation;
C1V1 = C2V2
Initial Concentration, C1 = ?
Initial Volume, V1 = 25.00 mL
Final Volume, V2 = 250 mL
Final Concentration, C2 = 0.1634 molL-1
Solving for C1;
C1 = C2 * V2 / V1
C1 = 0.1634 * 250 / 25.00
C1 = 1.634 molL-1
o
Plants rely heavily on _______
in the nitrogen cycle to incorporate nitrogen into organic come pounds
1 oxygen
2 viruses
3 bacteria
4 fungi
Answer:
3. Bacteria
Explanation:
If you don't trust me, search it up!
Where have you seen evidence of viscosity?
Answer:
Lubrication in vehicles. When you put oil into your car or truck, you should be aware of its viscosity
Cooking. Viscosity plays a significant role in the preparation and serving of food.
Manufacturing. Manufacturing equipment requires appropriate lubrication to run smoothly.
oh, and medicine
Suppose Rutherford's lab was 10 meters (m) long and the speed of an alpha particle is 3.0x10^8 meters per second (m/s). How much time would he plan on the alpha particles taking to move from the alpha particle source to the gold foil target? Write it in a mathematical equation
Answer:
t = d/v , 33.3 ns
Explanation:
Since distance, d = vt where v = speed and t = time taken to cover the distance.
Since the distance, d covered by the alpha particle is the length of Rutherford's lab which is 10 m long and the speed of the alpha particle is v = 3 × 10⁸ m/s, the time, t it takes the alpha particle to move from the alpha particle source to the gold foil target is thus
t = d/v
= 10 m/3 × 10⁸ m/s
= 10/3 × 10⁻⁸ s
= 3.33 × 10⁻⁸ s
= 33.3 × 10⁻⁹ s
= 33.3 ns
How many molecules are found in 3.4 moles of carbon dioxide?
Please help me asap! :0
Thank you!
Answer:
One mole of anything has 6.023 x 10^23 molecules.
That would mean 3.4moles of CO2 have 6.023x 10^23 times 3.0.
So that would be2.04782×10^24 molecules in 3.0 moles of C02.
Mole measure the number of elementary entities of a given substance that are present in a given sample. 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of molecules of carbon dioxide = number of moles of carbon dioxide ×6.022×10²³ molecules
Number of moles of carbon dioxide=3.4moles
Substituting the values in the above equation we get
number of molecules of carbon dioxide =3.4moles×6.022×10²³ molecules
number of molecules of carbon dioxide =2.047×10²⁴
Therefore, 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
What is the volume of an object that has a mass of 5.80 g and a density of 6.35 g/mL?
Answer:
1.09 mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
We can rearrange the equation to solve for volume, using algebra.
v = d/m
Therefore v = 6.35/5.80 = 1.09 mL
Which of the following pairs of elements will combine to produce a covalent bond?
1-Hydrogen and chlorine
2-Magnesium and oxygen
3-Lithium and bromine
Answer:
Hydrogen and Chlorine
ie HCL
The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.
In Chemistry, the three (3) main types of chemical bonds include:
Ionic bonds: Lithium and bromineHydrogen bonds: Hydrogen and oxygen.Covalent bonds: Hydrogen and chlorine.A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.
For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.
The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).
In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.
Read more: https://brainly.com/question/24212500
Which of these is a behavioral adaptation?
An anteater has a very long tongue to help it eat catch and eat ants.
An artic fox has white fur which helps it blend into the snow.
A mouse has 3–14 offspring at a time to increase the number that survive.
A brown bear hibernates and becomes inactive during winter.
Answer: Your answer would be D
Explanation: Sorry if i get it wrong ! (but good luck and make sure to rate)
Answer:
D
Explanation:
because when it is winter
a bear hibernates in a cave
and eats lots of food so it
dosent starve after sleeping
for such a while.
Hope this helps
plz mark brainliest
if you would be so kind!
bye!
what is the function of a prism
Answer:
Prisms are sometimes used for the internal reflection at the surfaces rather than for dispersion. If light inside the prism hits one of the surfaces at a sufficiently steep angle, total internal reflection occurs and all of the light is reflected.
Explanation:
Prism, in optics, piece of glass or other transparent material cut with precise angles and plane faces, useful for analyzing and reflecting light. An ordinary triangular prism can separate white light into its constituent colours, called a spectrum.
How many moles of CO2 are produced from 16 grams of O2
Answer:
One mole of CO2 has mass of 44 g and 32 g of O2. So 16 g of O2 have 22 g of CO2 or 0.5 moles of it.
brainliest plz
Explanation:
A forecaster studying the climate of an area would find which of the following most helpful?
A. average yearly precipitation
B. today's barometric pressure
C. temperature changes in one month
D. how often natural disasters occur
A forecaster studying the climate of an area would find average yearly precipitation most helpful.
What is forecaster studying of climate?Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.
Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.
Hence, option (A) is correct.
To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372
What is metal ? Where does it coke from ?
Answer:
Most pure metals, like aluminium, silver and copper, come from the Earth's crust. They are found in ores – solid materials called minerals, usually occurring in rock, from which the pure metal has to be extracted. The properties of pure metals can be improved by mixing them with other metals to make alloys.a metal is an element that readily forms positive ions (cations) and has metallic bonds
coke is a strong stimulant made from coca leaves
What kind of data does doppler radar provide?
Answer:
the one above is not right
Explanation:
how far is pluto from jupiter
Which of the following is an example of kinetic energy?
O B. a stretched rubber band
O C. a piece of coal
O A. a battery
O D. a rolling ball
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
how many moles is 130g of cocl2
Answer:
1.3142 mol CoCl2
Explanation:
Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2
Co = 28.0101 g Co per mole
Cl = 35.453 * g Cl per mole
28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole
Now, we divide:
130/98.9161 = 1.3142 mol CoCl2
There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.
According to this question, there are 130g of CoCl2.
molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol
moles = 130g ÷ 99g/mol
moles = 1.31 moles
Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).
Learn more about number of moles at: https://brainly.com/question/14919968
Did anyone do this worksheet (science)
Revise this statement to make it true:
Running water makes rock edges very sharp and pointy.
NEED HELP NOW PLEASE!! WHOEVER ANSWERS FIRST GETS BRAINIEST!!! No links or I’m reporting your answer.
Answer:
Running water makes rock edges very dull because of erosion.
Explanation:
hope this helps ^_^