100 Points! Algebra question. Use the given key features to sketch a nonlinear graph. Photo attached. Thank you!

Answer:

D

Step-by-step explanation:

sin  (  3pi / 4 )

 =  sin   (   pi   -   pi  /  4   )

 =  sin   (   pi / 4  )

 = 1/root(2)

  =  root(2) / 2

The measurement that is closest to the volume of the sphere is given as follows:

1,767.1 in³.

The volume of an sphere of radius r is given by the multiplication of 4π by the radius cubed and divided by 3, hence the equation is presented as follows:

[tex]V = \frac{4\pi r^3}{3}[/tex]

From the image given at the end of the answer, we have that the diameter is of 15 units, hence the radius of the sphere, which is half the diameter, is given as follows:

r = 0.5 x 15

r = 7.5 units.

Then the volume of the sphere is given as follows:

V = 4/3 x π x 7.5³

V = 1,767.1 in³.

The sphere is given by the image presented at the end of the answer.

More can be learned about the volume of a sphere at https://brainly.com/question/10171109

#SPJ1

The length of the other leg of the right triangle is 13.9 cm.

A right angle triangle is a triangle that has one of its angles as 90 degrees. The side of the right triangle can be named according to it angle position as hypotenuse side, adjacent side and opposite side.

Therefore, let's find the other leg of a right triangle with hypotenuse as 19 cm and one leg as 13 cm using Pythagoras's theorem as follows:

c² = a² + b²

where

Therefore,

b = √19² - 13²

b = √361 - 169

b = √192

b = 13.8564064606

Therefore,

length of the other leg = 13.9 cm

learn more on triangle here: brainly.com/question/31304267

#SPJ1

The three consecutive multiples of 3 are 15, 18 and 21

First, let's determine three successive multiples of 3:

The subsequent two would be "x+3" and "x+6" if we call the initial number "x".

Since we are aware that the third number (x+6) is one more than the first two numbers (x + x+3), we can write the following equation:

2/3(x + x+3) = (x+6) + 1

Simplifying this equation, we get:

2/3(2x+3) = x+7

Multiplying both sides by 3, we get:

2(2x+3) = 3(x+7)

Expanding and simplifying, we get:

4x + 6 = 3x + 21

Subtracting 3x and 6 from both sides, we get:

x = 15

Therefore, the three consecutive multiples of 3 are 15, 18 and 21

Learn more about consecutive multiples here : brainly.com/question/22081489

#SPJ1

Each number should be dragged to a box to complete the table as follows;

Kilometers     Meters

1                        1,000

2                       2,000

3                       3,000

5                       5,000

8                       8,000

In Science and Mathematics, a conversion factor can be defined as a number that is used to convert a number in one set of units to another, either by dividing or multiplying.

Generally speaking, there are one (1) kilometer in one thousand (1,000) meters. This ultimately implies that, a proportion or ratio for the conversion of kilometer to meters would be written as follows;

Conversion:

1 kilometer = 1,000 meters

2 kilometer = 2,000 meters

3 kilometer = 3,000 meters

4 kilometer = 4,000 meters

5 kilometer = 5,000 meters

6 kilometer = 6,000 meters

7 kilometer = 7,000 meters

8 kilometer = 8,000 meters

Read more on conversion factor here: brainly.com/question/28308386

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

Answer:

65 units

Step-by-step explanation:

solution Given:

apothem(a)=10

no of side(n)= 10

First, we need to find the length of one side (s).

We can find the length of one side using the following formula:

[tex]\boxed{\bold{s = 2 * a * tan(\frac{\pi}{n})}}[/tex]

substituting value:

[tex]\bold{s = 2 * 10 * tan(\frac{\pi}{10})=6.498}[/tex]   here π is 180°

Now

Perimeter: n*s

substituting value:

Perimeter = 10*6.498= 64.98 in nearest tenth 65 units

Therefore, the Perimeter of a regular decagon is 65 units.

Answer:

65.0 units

Step-by-step explanation:

A regular decagon is a 10-sided polygon with sides of equal length.

To find its perimeter, we first need to find its side length (s).

As we have been given its apothem, we can use the apothem formula to find an expression for side length (s).

[tex]\boxed{\begin{minipage}{5.5cm}\underline{Apothem of a regular polygon}\\\\$a=\dfrac{s}{2 \tan\left(\dfrac{180^{\circ}}{n}\right)}$\\\\where:\\\phantom{ww}$\bullet$ $s$ is the side length.\\ \phantom{ww}$\bullet$ $n$ is the number of sides.\\\end{minipage}}[/tex]

Given the apothem is 10 units and the number of sides is 10, substitute a = 10 and n = 10 into the formula and solve for s:

[tex]10=\dfrac{s}{2 \tan \left(\dfrac{180^{\circ}}{10}\right)}[/tex]

[tex]10=\dfrac{s}{2 \tan \left(18^{\circ}\right)}[/tex]

[tex]s=20 \tan \left(18^{\circ}\right)[/tex]

The perimeter (P) of a regular polygon is the product of its side length and the number of sides. Therefore, the perimeter of the given regular decagon is:

[tex]P=s \cdot n[/tex]

[tex]P=20 \tan \left(18^{\circ}\right) \cdot 10[/tex]

[tex]P=200 \tan \left(18^{\circ}\right)[/tex]

[tex]P=64.9839392...[/tex]

[tex]P=65.0\; \sf units\;(nearest\;tenth)[/tex]

Therefore, the perimeter of a regular decagon with an apothem of 10 units is 65.0 units, to the nearest tenth.

5. The probability that the sample mean weight is greater than 3.55 kilograms is about 0.1230.

6. The probability that less than 20% of the sample is from poverty-level households is about 0.2119.

The probability that the sample mean weight is greater than 3.55 kilograms is determined as follows;

The standard error of the mean is determined using the formula:

where;

Substituting the given values:

SE = 0.5/√15

SE ≈ 0.1291

The z-score corresponding to this value will be:

z = (3.55 - 3.4) / 0.1291

z ≈ 1.16

Using a calculator, the probability of a z-score being greater than 1.16 is about 0.1230.

6. The standard error of a proportion is determined using the formula:

where;

Substituting the given values:

SE = √[0.22(1-0.22)/300]

SE ≈ 0.0251

The z-score corresponding to this value will be:

z = (0.20 - 0.22) / 0.0251

z ≈ -0.80

Using a calculator, the probability of a z-score being less than -0.80 is about 0.2119.

Learn more about probability at: https://brainly.com/question/13652429

#SPJ1

The statement is not true because random sampling does not eliminate all potential sources of bias and variability in the sample selection process.

Other factors and variables that influence study outcomes include sampling bias, sample size, sampling frame, selection methods, population heterogeneity, and study design and execution.

The statement that random sampling guarantees a representative sample of the population is not entirely true.

While random sampling is a valuable method to increase the likelihood of obtaining a representative sample, it does not provide an absolute guarantee.

There are several factors and variables that can influence the outcomes of studies, even with random sampling.

Sampling Bias: Despite random sampling, certain biases can still occur. For example, non-response bias can arise if selected individuals choose not to participate or are unavailable, which can lead to a non-representative sample.

Sample Size: The size of the sample plays a crucial role in its representativeness.

If the sample size is too small, it may not accurately reflect the diversity and characteristics of the population, leading to biased results.

Sampling Frame: The sampling frame refers to the list or method used to identify potential participants.

If the sampling frame is incomplete or inaccurate, the resulting sample may not be representative of the entire population.

Selection Methods: Random sampling is just one method of selecting a sample. Other sampling methods, such as stratified sampling or convenience sampling, may introduce additional biases and affect the representativeness of the sample.

Population Heterogeneity: The variability and diversity within the population can impact the representativeness of the sample.

If the population is highly heterogeneous, it may be challenging to capture all its characteristics accurately.

Study Design and Execution:

The design and execution of the study, including survey questions, data collection methods, and potential confounding variables, can influence the outcomes and introduce biases.

While random sampling is a valuable tool, researchers must consider and address these factors and variables to enhance the representativeness and reliability of their study results. It is essential to employ rigorous methodologies and employ statistical techniques to account for potential biases and limitations.

For similar question on random sampling.

https://brainly.com/question/13219833

#SPJ11

The correct option is B, the total volume is 6 gallons, 2 quarts, and 1 pint.

Here we just need to add all the volumes that are in the question, we have.

So there are:

3 gallons.

8 quarts.

13 pints.

Now let's do the changes of units, we know that:

8 pints = 1 gallon

4 quarts = 1 gallon

1 quart = 2 pints

then:

13 pints = 1 gallon  and 5 pints

8 quarts = 2 gallons

5 pints = 2 quarts and 1 pint

Then the total volume is:

6 gallons, 2 quarts, and 1 pint.

LEarn more about adding volume:

https://brainly.com/question/1972490

#SPJ1

The statement about the function is: "The function is decreasing for all real values of x where x < -4." D.

The given information tells us that the graph represents a downward-opening parabola.

The vertex of the parabola is located at (-4, 4) indicates that this point is the highest point on the graph.

As we move to the left of the vertex, the function values decrease, indicating a decreasing trend.

Moreover, the graph passes through the point (-6, 0), which lies to the left of the vertex.

This confirms that the function is decreasing for all real values of x less than -4, including x < -6.

On the other hand, the graph also passes through the point (-2, 0), which lies to the right of the vertex.

This does not impact the conclusion that the function is decreasing for x < -4, as the graph's behavior to the right of the vertex is not relevant to this particular statement.

Based on the given information and the properties of the downward-opening parabola, we can conclude that the function is decreasing for all real values of x where x < -4.

For similar questions on function

https://brainly.com/question/25638609

#SPJ11

Answer:

Step-by-step explanation:

A = 10 cm - 4cm = 6cm

B =

[tex]\sqrt{4^2+7^2}\\ = \sqrt{16+49}\\ = \sqrt{65}[/tex]

C  =  [tex]\sqrt{10^2+3^2}\\ = \sqrt{109}[/tex]

D = [tex]\sqrt{10^2+6^2}\\ = \sqrt{136}[/tex]

Answer:

Step-by-step explanation:

Find the square of 25/9. Thought the answer was 5/3 but the test prep answer key has 7 58/81

[tex](\frac{25}{9} )^2\\=(\frac{5}{3} )^4\\= \frac{625}{81}[/tex]Answer:

Step-by-step explanation:

Zero:

x = 0,

Multiplicity:

1,

Effect:

Intersects x-axis at x = 0

Zero:

x = 1,

Multiplicity:

1,

Effect:

Intersects x-axis at x = 1

Zero:

x = -2/5,

Multiplicity:

3,

Effect:

Intersects x-axis at x = -2/5 =0 with a steep curve

The zeros, multiplicity, and effect of the function f(x) = 3x(x - 1)˚ (5x + 2)³, we need to factor the expression.

First, let's identify the zeros by setting the expression equal to zero and solving for x:

3x(x - 1)˚ (5x + 2)³ = 0

Setting each factor equal to zero:

3x = 0 --> Zero: x = 0

x - 1 = 0 --> Zero: x = 1

(5x + 2)³ = 0 --> Zero: x = -2/5

Now, let's determine the multiplicity and effect of each zero:

Zero:

x = 0

To determine the multiplicity, we look at the exponent of the factor (x) in the expression.

The factor x has a multiplicity of 1 since it appears once.

The effect of this zero is that it is a root of the function and causes the graph to intersect the x-axis at x = 0.

Zero:

x = 1

Similar to the previous case, the factor (x - 1) has a multiplicity of 1 since it appears once.

The effect of this zero is that it is a root of the function and causes the graph to intersect the x-axis at x = 1.

Zero:

x = -2/5

The factor (5x + 2) has a multiplicity of 3 because it appears cubed (exponent of 3).

The effect of this zero is that it is a root of the function and causes the graph to intersect the x-axis at x = -2/5 with a steep curve, as it is raised to the power of 3.

For similar questions on Intersects

https://brainly.com/question/28744045

#SPJ11

The transformation of Δ ABC  to ΔADE is a dilation by a scale factor of 1/2 and then 180 degrees rotation about the origin.

We have,

In ΔABC,

The coordinates of each point are:

A = (0, 0)

B = (0, -6)

C = (8, -6)

And,

ΔADE,

A = (0, 0)

D = (0, 3)

E = (4, 3)

Now,

We can see that,

If we use a scale factor 1/2 on each the coordinates of A, B, and C and rotated to 180 degrees about the origin.

We get,

A = (0, 0) = (0, 0)

B = (0, - 6) = (0, -3) = (0, 3)

C = (8, -6) = (4, -3) = (4, 3)

Thus,

The transformation of Δ ABC  to ΔADE is a dilation by a scale factor of 1/2 and then 180 degrees rotation about the origin.

Learn more about dilation here:

brainly.com/question/13176891

#SPJ1

3√2 and 3 are the values of x and y respectively from the figure.

The given diagram is a right triangle with an acute angle of 45 degrees

We need to determine the values of variables x and y.

Applying the trigonometry identity, we will have:

sin 45 = opposite/hypotenuse
sin45 = 3/x

x = 3/sin45

x = 3/(1/√2)
x = 3√2

Similarly:

tan 45 = opposite/adjacent
tan 45 = 3/y

1 = 3/y

y = 3

Hence the values of x and y from the figure is 3√2 and 3 respectively

Learn more on trigonometry identity here: https://brainly.com/question/7331447

#SPJ1

The required measure of point P above the sea level is 6717.22 feet.

Given that,

A is known to be 6,500 feet above sea level; AB = 230 feet.

And, The angle at A looking up at P is 20°.

The angle at B looking up at P is 35°.

Since, These are the equation that contains trigonometric operators such as sin, cos.. etc.. In algebraic operations.

Here,

Let the horizontal distance between A and Q be x and the vertical distance between P and Q be h.

Now,

tan20 = h / x

034x = h

Now,

tan35 = [230 + h]/x

0.7x = 230 + 0.34x

x = 636.89

Now,

h = 0.34 x 636.89

h = 217.2

Now,

The measure of peak P above sea level = 217.2 + 6500 = 6717.22

Thus, the required measure of point P above the sea level is 6717.22 feet.

Learn more about trigonometry equations here:

brainly.com/question/22624805

#SPJ1

Answer: 6

Step-by-step explanation:

(-4 + 7) x (-4 - 7)

 \/ \/

 possitive 3 possitive 3

 3x3= 6

We cannot conclude that there are more than 70,000 defined words in the dictionary.

To test the claim that there are more than 70,000 defined words in the dictionary, we can set up the null and alternative hypotheses as follows:

Null Hypothesis (H0): The mean number of defined words on a page is 48.0 or less.

Alternative Hypothesis (H1): The mean number of defined words on a page is greater than 48.0.

So, sample mean

= (59 + 37 + 56 + 67 + 43 + 49 + 46 + 37 + 41 + 85) / 10

= 510 / 10

= 51.0

and, the sample standard deviation (s)

= √[((59 - 51)² + (37 - 51)² + ... + (85 - 51)²) / (10 - 1)]

≈ 16.23

Next, we calculate the test statistic using the formula:

test statistic = (x - μ) / (s / √n)

In this case, μ = 48.0, s ≈ 16.23, and n = 10.

test statistic = (51.0 - 48.0) / (16.23 / √10) ≈ 1.34

With a significance level of 0.05 and 9 degrees of freedom (n - 1 = 10 - 1 = 9), the critical value is 1.833.

Since the test statistic (1.34) is not greater than the critical value (1.833), we do not have enough evidence to reject the null hypothesis.

Therefore, based on the given data, we cannot conclude that there are more than 70,000 defined words in the dictionary.

Learn more about test statistic here:

https://brainly.com/question/31746962

#SPJ1

The values of Composite function are:

f(g(-1)) = 20

h[g(4)] = 40

g[f(5)] = -37

f[h(-4)] = -44

g[g(7)] = 35

h[f(1/2)] = -8

We have, f(x) = -2x, g(x) = 3x-7 and h(x)= 2x² -10

f(g(-1)):

First, substitute -1 into g(x): g(-1) = 3(-1) - 7 = -3 - 7 = -10.

Next, substitute the result into f(x): f(-10) = -2(-10) = 20.

Therefore, f(g(-1)) = 20.

h[g(4)]:

First, substitute 4 into g(x): g(4) = 3(4) - 7 = 12 - 7 = 5.

Next, substitute the result into h(x): h(5) = 2(5^2) - 10 = 2(25) - 10 = 50 - 10 = 40.

Therefore, h[g(4)] = 40.

g[f(5)]:

First, substitute 5 into f(x): f(5) = -2(5) = -10.

Next, substitute the result into g(x): g(-10) = 3(-10) - 7 = -30 - 7 = -37.

Therefore, g[f(5)] = -37.

f[h(-4)]:

First, substitute -4 into h(x): h(-4) = 2(-4²) - 10 = 2(16) - 10 = 32 - 10 = 22.

Next, substitute the result into f(x): f(22) = -2(22) = -44.

Therefore, f[h(-4)] = -44.

g[g(7)]:

First, substitute 7 into g(x): g(7) = 3(7) - 7 = 21 - 7 = 14.

Next, substitute the result into g(x) again: g(14) = 3(14) - 7 = 42 - 7 = 35.

Therefore, g[g(7)] = 35.

h[f(1/2)]:

First, substitute 1/2 into f(x): f(1/2) = -2(1/2) = -1.

Next, substitute the result into h(x): h(-1) = 2(-1²) - 10 = 2(1) - 10 = 2 - 10 = -8.

Therefore, h[f(1/2)] = -8.

Learn more about Composite function here:

https://brainly.com/question/30660139

#SPJ1

Answer:

6

Step-by-step explanation:

318 / 53  = 6

the remainder is 0

The standard deviation of the population function x is 2.

We have,

To find the standard deviation of the population function x, we need the mean M(x) and the mean of the squared values M(x²).

So,

Standard Deviation = √[M(x²) - (M(x))²]

Given that M(x) = 2 and M(x²) = 8, we can substitute these values into the formula:

Standard Deviation = √[8 - (2)²]

Standard Deviation = √[8 - 4]

Standard Deviation = √4

Standard Deviation = 2

Therefore,

The standard deviation of the population function x is 2.

Learn more about standard deviation here:

https://brainly.com/question/13905583

#SPJ1

The wheelchair access ramp must be 216.09 inches long.

To find the length of the wheelchair access ramp, we can use trigonometry.

The tangent function relates the angle of elevation to the ratio of the opposite side (height) to the adjacent side (length of the ramp).

Let's denote the length of the ramp as "x".

The height of the ramp is given as 18 inches.

Using the tangent function:

tan(angle of elevation) = height/length of the ramp

tan(4.8 degrees) = 18/x

To solve for x, we can rearrange the equation:

x = 18 / tan(4.8 degrees)

Using a calculator to evaluate the tangent of 4.8 degrees:

x = 18 / 0.08331

x= 216.09

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ1

The graph of the piecewise function g(x) is given by the image presented at the end of the answer.

A piece-wise function is a function that has different definitions, depending on the input of the function.

The definitions to the function in this problem are given as follows:

Hence the graph of the piecewise function g(x) is given by the image presented at the end of the answer.

More can be learned about piece-wise functions at brainly.com/question/19358926

#SPJ1

The total mass of the packages is 37.67 kg

From the question, we have the following parameters that can be used in our computation:

Packages    Mass (kg)

1                         3.94

2                      14.81

3                          11.27

4                           7.65

The total mass of the packages is the sum of each mass

using the above as a guide, we have the following:

Total mass = 3.94 + 14.81 + 11.27 + 7.65

Evaluate the sum

So, we have

Total mass = 37.67

Hence, the total mass of the packages is 37.67 kg

Read more about expressions at

https://brainly.com/question/15775046

#SPJ1

The equation of the circle with center (-4, 4) and passing through (-2, 4) is [tex](x + 4)^2 + (y - 4)^2 = 4.[/tex]

We have,

To determine the equation of a circle, we need the center coordinates and the radius. The center coordinates are given as (-4, 4), and we have a point on the circle as (-2, 4).

The distance between the center (-4, 4) and the point on the circle (-2, 4) represents the radius of the circle.

Using the distance formula.

[tex]radius = √[(x_2 - x_1)^2 + (y_2 - y_1)^2]\\= \sqrt{(-2 - (-4))^2 + (4 - 4)^2}\\= \sqrt{2^2 + 0^2}\\= \sqrt{4}\\= 2[/tex]

Now that we have the center coordinates (-4, 4) and the radius 2, we can write the equation of the circle in standard form:

[tex](x - h)^2 + (y - k)^2 = r^2[/tex]

Substituting the values:

[tex](x - (-4))^2 + (y - 4)^2 = 2^2\\(x + 4)^2 + (y - 4)^2 = 4[/tex]

Therefore,

The equation of the circle with center (-4, 4) and passing through (-2, 4) is [tex](x + 4)^2 + (y - 4)^2 = 4.[/tex]

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

Using the least-squares regression method, the line of best fit is line d.

According to the graph, we can see that the sum of distance to line d is smallest ( least-square).

Least-squares regression is a statistical technique employed to ascertain the optimal line of best fit within a dataset. This line is determined by minimizing the total sum of squared discrepancies between the observed y-values and the predicted y-values that lie on the line.

In this method, we aim to find the line that best captures the relationship between the variables by minimizing the squared differences. By doing so, we strive to minimize the overall error and maximize the accuracy of the line in representing the data.

Learn about least-square regression here https://brainly.com/question/14563186

#SPJ1

The shapes matched to the correct answers are given as follows.

A  = 3  - SAS

B = 1  Not Similar

C = 4 - SSS

D = 2 - AA

SAS stands for "side, angle, side," and it denotes that we have two triangles with two sides and an included angle that are equal.

The triangles are congruent if two sides and the included angle of one triangle are equivalent to the corresponding sides and angle of another triangle.

From A, we can see that ΔFEQ is similar to ΔRSQ because the ration of their sides are similar. That is

EQ/FQ = SQ/RQ

⇒ 36/18 = 48/24

⇒ 2 = 2

Also since they share the same angle EQF and SQR (congruence of opposite angles)

then A  = 3  - SAS

B)  B = 1 - that is both triangles are not similar. If the above principles are applied, we would find that none of the sides have similar ratio.

For example,

48/28 ≠ 36/20

Thus, B =  1  Not Similar

C  = 4 - SSS

this is because all side are similar.

BC: TU = 9:1
BD : SU = 9:1

DC : TS = 9:1

Hence, Side - Side - Side postulate applied.

D. In tis case we are given triangles with two similar angles each so Angle - Angle postulate applies. That is D =  2 - AA

Learn more about S.A.S:
https://brainly.com/question/29082532
#SPJ1

Using  the associative law of multiplication we get this two solution of the given expression: (12x)y = (12 * x) * y , (12x)y = 12 * (x * y)

The associative law of multiplication states that when multiplying three or more numbers, the product is the same regardless of the order in which the numbers are grouped. In other words, it doesn't matter which numbers we multiply first, the result will be the same.

Using the associative law of multiplication, we can group the factors in any way we like. Therefore, we can write an equivalent expression to (12x)y by changing the grouping of factors.

One way to group the factors is to group the two numerical coefficients (12 and y) together.

Another way to group the factors is to group the variable x and the coefficient y together.

Both of these expressions are equivalent to (12x)y and they all follow the associative law of multiplication.

For such more questions on associative law

https://brainly.com/question/30034923

#SPJ8