Answer:
In this instance, the sound wave travels 340 meters in 1 second, so the speed of the wave is 340 m/s. Remember, when there is a reflection, the wave doubles its distance. In other words, the distance traveled by the sound wave in 1 second is equivalent to the 170 meters down to the canyon wall plus the 170 meters back from the canyon wall.
Explanation:
Among electromagnetic waves, UV rays are most dangerous because exposure to these radiation cause serious problems in living organism. Therefore, in below given ways, speed of each wave can be expressed.
What is electromagnetic wave?Electromagnetic wave is a wave which contain two component one is electric component and other is magnetic component. The electric and magnetic component are perpendicular to each other. There are so many wave that comes under electromagnetic wave like infrared wave , radio wave.
There is a relation between energy of wave. frequency of wave, and wavelength of wave
Mathematically,
E=hc/λ
where,
E = energy of electromagnetic wave
h is planks constant having value 6.67×10⁻³⁴js
c is speed of light that is 3×10⁸m/s
λ is the wavelength of electromagnetic wave
The sound wave moves 340 meters in one second, hence its speed is 340 m/s. In the event of a reflection, the wave's distance doubles. The distance covered by sound wave in one second is comparable to 170 metres down to a canyon wall + 170 meters back.
Therefore, in above given ways, speed of each wave can be expressed.
To know more about electromagnetic wave, here:
https://brainly.com/question/12289372
#SPJ2
2 QUESTIONS: ANSWER THIS with a proper answer plz. PLZ DO NOT ANSWER JUST FOR MY BRAINLY POINTS!!!!
15. For elements 1-36, there are two exceptions to the filling order as predicted from the periodic table. Draw the atomic orbital diagrams for the two exceptions and indicate how many unpaired electrons are present.
16. The elements Si, Ga, As, Ge, Al, Cd, S, and Se are all used in the manufacture of various semiconductor devices. Write the expected electron configuration for these atoms.
Answer:
Si hay algo que sucedió entre ustedes raro o un comportamiento que tuviste con esa persona o que te vio hacer asi como le pudieron decir algo de ti que no le gustara a tu amigo hace que se comporte raro contigo
Explanation:
can someone explain what these are used for our teacher never taught us about it
1st one so nonthing gets in your eyes
2nd one so nonthing gets on your shirt
3rd one is to wash your eyes when stuff gets in them
4th is when a fire breaks out and you use that to get rid of it
5th is for when someone is on fire you wave them with it
In order for convection to transfer heat, particles need to
a circulate and move within a liquid or gas
b make contact with the heat source
c transmit electromagnetic waves
How does changing the Amplitude affect the energy of the wave?
DUE SOON PLEASE HELP WILL MAKE FIRST ANSWER BRAINLIEST!!!
You have explored some interesting, informative, and amusing examples of models. Now it's time to get creative and make your own model. Here is the requirement checklist for your model:
-Model types can include drawings, diagrams, physical models, virtual simulations, or videos.
-Models must be created by you, not something selected from an online or outside source.
-Submit a presentation, picture, video, or screenshot of your model.
-Submit a one-paragraph summary describing the topic you chose, your model, what it represents, how you made it, and the specific science involved. It is important that you are using science terminology and are accurate.
Now that you know how to create and submit your model, you will need to choose a topic for your model. Choose one of the three topics listed below. Select each topic for an overview.
1- Conservation of Mass-Explore the law of conservation of mass. Model a physical or chemical change, and then demonstrate how mass is conserved before and after the change.
2- Atomic Theory-Explore the atomic theory of atoms. Create a model that represents the motion and intermolecular attractions of particles in solids, liquids, and gases.
3- Thermal Energy-Explore the effects of thermal energy. Model how adding or removing thermal energy affects motion in particles in a pure substance, such as water, or in a chemical reaction.
!!PLEASE CHOOSE ONE OF THE 3 ABOVE!!
Answer:
Choice 3
Explanation:
I think it would be the easiest
Calculate the mass of a liquid with a density of 4.7 g/mL and a volume of 15 mL. pls help me
Answer:0.31
Explanation:that the answer
Answer:
biraz naruto izle
Explanation:
Whats the effect?
A wave enters a new medium perpendicular to the boundary between the two media.
Answer: A wave
Explanation:
Because it’s the one that’s cause the new medium to go between the two media.
=:)
✿
All substances taking part in a certain interaction are shown below:
Carbonate = Calcium Oxide + Carbon Dioxide
Calcium Oxide equals: 112 G
Carbon Dioxide equals: 88 G
Which of the following is the correct estimate of the amount of calcium carbonate used in the interaction?
A. Sum of 112 g and 88 g
B. Difference between 112 g and 88 g
C. Twice the sum of 112 g and 88 g
D. Twice the difference between 112 g and 88 g
✿
any help is much appreciated <3
will reward brainliest to the correct answer (•◡•) !
Answer:The Law of Conservation of Mass simply states that the total amount of mass should not change in a chemical reaction that is isolated (no other objects can enter the reaction). The total mass of the reactants must be equal to the total mass of the products. Thus, the correct estimate of the amount of oxygen used in the interaction is the difference between 133 g and 29 g.
Explanation: I hope this helped!
What is the effect
A wave enters a new medium perpendicular to the boundary between the two media.
Answer:
something that is produced by an agency or cause; result; consequence: Exposure to the sun had the effect of toughening his skin. power to produce results; efficacy; force; influence: His protest had no effect.
Refraction is the change in direction of propagation of a wave when the wave passes from one medium into another, and changes its speed. Light waves are refracted when crossing the boundary from one transparent medium into another because the speed of light is different in different media.
Explanation:
hope the answer was helpful...
Brainstorm as many causes as you can for the phenomenon that waves seem to change direction as they approach the shore.
Answer:
As a wave moves into shallow water, its orbitals “feel the bottom,” causing it to slow down. you will see a sea of red tail lights in front of you: the cars in front of you are all Why does the wavelength of waves change as they approach a beach direction, so at any given spot in the ocean, waves are typically coming from
Explanation:
I hope I help :)
When a force is applied to an object, its _____, the object _________________________________________________________.
Subject = Science
Whats the effect of this?
A wave enters a medium where its wave speed is slower.
Answer:
Wave speed, frequency and wavelength in refraction
Although the wave slows down, its frequency remains the same, due to the fact that its wavelength is shorter. When waves travel from one medium to another the frequency never changes. As waves travel into the denser medium, they slow down and wavelength decreases.
Explanation:
havvee advvanncceed
Answer:
Waves. Refraction is an effect that occurs when a light wave, incident at an angle away from the normal, passes a boundary from one medium into another in which there is a change in velocity of the light. Light is refracted when it crosses the interface from air into glass in which it moves more slowly.
Define exothermic reaction.
Define endothermic reaction.
Answer:
An exothermic reaction is a chemical reaction that releases heat energy to the surroundings. This means that the overall energy of the products is lower than the overall energy of the reactants, resulting in a net release of energy in the form of heat. This can be observed as an increase in temperature of the surroundings or an increase in the motion of the reactant particles, as they absorb the energy that is released. Examples of exothermic reactions include combustion, oxidation, and many biochemical reactions.
Explanation:
Answer 1-8
(ANSWER THE WHOLE THING AND NOT JUST 1-2 QUESTIONS)
1. D
2. C
3. A
4. B
5. D
6. B
7. C
8. A
the difference between the three types of mechanical waves.
Draw a wave with a wavelength of six units
Answer:
There ya gooo.
Explanation:
Answer:
Explanation:
How am I supposed to draw something in text? Oh, I know! _/\_/\_/\_/\_/\_/\_
general properties shared by all waves.
Answer:
All kinds of waves have the same fundamental properties of reflection, refraction, diffraction and interference, and all waves have a wavelength, frequency, speed and amplitude.
How are strato volcanoes different from shield volcanoes?
Strato volcanoes are more explosive than shield volcanoes.
Strato volcanoes are only found by oceans and shield are not.
Shield volcanoes are always larger than strato volcanoes.
Shield volcanoes only produce ashes and strato volcanoes only produce lava.
Answer:
b
Explanation:
i got it right on USA Test prep
The diagram shows a generator powered by a water turbine. Based on the diagram, what type of energy transformation takes place in the generator?
A
Mechanical energy is transformed into electrical energy.
B
Chemical energy is transformed into kinetic energy.
C
Electrical energy is transformed into potential energy.
D
Electrical energy is transformed into chemical energy.
The transformation takes place in the generator is mechanical energy is transformed into electrical energy. Hence option A is correct.
What is energy transformation?Energy transformation is defined as the conversion of energy from one form to another. The passage of energy from one place to another is known as energy transfer. When energy transforms, it goes from one type to another.
Hydroelectricity is a type of renewable energy that produces electricity by harnessing the force of moving water. Mechanical energy is transformed into electrical energy in a generator. Most generators create alternating current as their source of electricity. A generator spins when a turbine's blades rotate due to falling water, converting the mechanical energy of the spinning turbine into electrical energy.
Thus, the transformation takes place in the generator is mechanical energy is transformed into electrical energy. Hence option A is correct.
To learn more about energy transformation, refer to the link below:
https://brainly.com/question/29102331
#SPJ2
When an object is moving on a surface with a lot of texture, how does this affect the amount of friction created?
The friction is stopped.
Less friction is created.
More friction is created.
The amount of friction is the same.
Which is one factor of rock types that affects the rate of weathering?
porosity
moisture
temperature
mineral color
Answer:
B
Explanation:
got it right on edge
Answer:
Its A porosity
Explanation:
What is convection?
a Transfer of heat through objects touching the source
b Transfer of heat through direct physical contact
c Transfer of heat through electromagnetic waves
d Transfer of heat through the movement of particles
Answer:
d transfer of heat through the movement of particles
The correct answer is option d: Transfer of heat through the movement of particles. Convection is a mode of heat transfer that occurs through the movement of particles.
Convection is the transfer of heat through the movement of particles in a fluid, such as a gas or liquid. Option (d) is the correct answer. Convection occurs when a temperature difference exists within the fluid, causing the hotter particles to become less dense and rise while the cooler particles sink. This movement creates a circulation pattern known as convection currents. Convection is a significant mechanism for heat transfer in various natural and man-made systems. For example, when a pot of water is heated on a stove, the bottom of the pot gets hot, causing the water near the bottom to heat up and expand. This hot water rises to the top, transferring heat to the surrounding cooler water. As a result, the water circulates in a convection current, leading to a more uniform distribution of heat. Convection is also responsible for phenomena like ocean currents, atmospheric circulation, and even the formation of thunderstorms. It plays a crucial role in distributing heat within the Earth's atmosphere and oceans, impacting weather patterns and climate.
For more question on heat
https://brainly.com/question/30738335
#SPJ8
Sand at a beach becomes very warm after being exposed to sunlight for many hours due to what type of heat transfer?
A. Conduction
B. Convection
C. Raditation
Answer:
B
Explanation:
Answer:
C
Explanation:
When lie down on hot sand, the energy flows from the sand to your body by conduction. Conduction is the transfer of heat between two things that touch each other.
2. Record your observations about what happens to a wave when it reaches the boundary between two media.
the wave bounces back off the first media and returns to it origanal resting place
Explanation:
A GFCI is an example of what kind of electrical safety device?
A.a frayed cord
B.a lightning rod
C.a parallel circuit
D.a circuit breaker
Answer:
Circuit breaker.
Explanation:
please help
with this question
1. If the frequency of a wave increases from 2 Hz to 4 Hz without the wavelength changing, how will the wave speed change?
Answer:
Given expression: 6(2b-4). To find the value of 6(2b-4) at b= 5, we need to substitute the b=5 in the expression, we get….Therefore, the value of 6(2b-4) is 36, when b=5.
Explanation:
Given expression: 6(2b-4). To find the value of 6(2b-4) at b= 5, we need to substitute the b=5 in the expression, we get….Therefore, the value of 6(2b-4) is 36, when b=5.
As frequency decreases, wavelength…...
finish this sentence
What is the effect of this??
A wave enters a new medium at an angle far from 90 degrees with the boundary between the two media.
Answer:
Explanation:
The wavelength is the distance between two adjacent wavefronts. ... If the wave crosses to the new medium at an angle (not 90 degrees), the change ... When light enters a more optically dense medium, it is refracted closer to the normal. the same as the critical angle, light will travel along the boundary of the 2 mediums.
What is a real world application of understanding the difference between prokaryotic cells and eukaryotic cells?
Being able to identify them with your naked eye
Differentiating between animal and human cells.
Understanding the treatments casued by different infections.
Being able to identify bacterias habitat.
Answer:
FIRST ONE
Explanation: