1. A roller coaster with a mass of 800 kg sits stationary at the top of a section of track, 75 m above

the ground as shown. When the brake is released, it starts to roll down the track


2. For each height represented in the diagram, calculate the gravitational potential energy using

Ep = mgh. Show ONE SAMPLE calculation in the calculations section below and fill in Table 1 for

each of the heights of the roller coaster. (6 marks)


3. Assuming there is no friction, determine the mechanical kinetic energy using Ek = Etotal - Ep.

Show ONE SAMPLE calculation in the calculations section below and fill in Table 1 for each of

the heights of the roller coaster. (6 marks)


4. For each height represented in the diagram, calculate the velocity using = �2

. Show ONE

SAMPLE calculation in the calculations section below and fill in Table 1 for each of the heights of

the roller coaster. (6 marks)


5. Use your answers to graph how gravitational potential energy, mechanical kinetic energy, and

velocity change as the roller coaster changes height. Use different colours for the three lines on

the graph. Graph paper is provided below. (3 marks)


6. Repeat steps 1 – 5 above for a roller coaster cart that has a mass of 300 kg and enter your

results in Table 2.

Calculations:

800 kg roller coaster cart:

Sample calculation for gravitational potential energy:

Sample calculation for Mechanical kinetic energy:

Sample calculation for velocity:


300 kg roller coaster cart:

Sample calculation for gravitational potential energy:

Sample calculation for mechanical kinetic energy:

Sample calculation for velocity:


Results:

Table 1: Potential energy, kinetic energy, total energy, and velocity of the 800 kg roller coaster cart


Table 2: Potential energy, kinetic energy, total energy, velocity of the 300 kg roller coaster cart.


Graphs:

It’s graphing time. These graphs are a bit different than the ones you did in the

data analysis assignment at the beginning of the course. In this case you have

three things to graph on each graph. (One graph for the 800 kg roller coaster cart

and one graph for the 300 kg roller coaster cart.) You need to graph the

gravitational potential energy with respect to height, the mechanical kinetic

energy vs height, and the velocity vs height.

Let’s look at the energy graphs first. In this case both kinetic energy and

mechanical energy cover the same range of values. This means they can use the

same scale on the y-axis. So, you will use the left y-axis and the x-axis to graph

the kinetic energy vs height and the potential energy vs height. You will need a

legend to explain which line is which. Colour coding is a nice way to highlight this.

The velocity values are much different than the energy values. This means you

need a totally different scale. So, your left y-axis won’t work. You need to make a

second scale on the right y-axis for your velocity values. You will plot the points

the same way as normal, but you will use the numbers on the right-hand scale

instead. Again, be sure to add your velocity line to the legend with a separate

colour code.


Discussion Questions:

1. Describe the relationship between the gravitational potential energy and the mechanical kinetic

energy of the roller coaster on your graph. (2 marks)

2. Describe the shapes of each of the three lines in the graph. Explain why the velocity is different.

(4 marks)

3. Describe how mass affects the speed at the bottom of the roller coaster. (2 marks)

4. Describe how mass affects the gravitational potential energy and the mechanical kinetic energy

of the roller coaster. (2 marks)

5. At what point does the roller coaster have a maximum value for the following? Justify your

answer by explaining why. (2 marks each)

a. Gravitational potential energy

b. Mechanical energy

c. Velocity

6. In your calculations, you assumed that the roller coaster was frictionless. All real roller coasters

encounter friction. Describe how the actual values of the variables would differ, or not differ,

from your calculated values for a real roller coaster. (Hint: what form of energy would some of

the total energy be converted to if there was friction in the system?) (4 marks)

How you will be graded:

Grades will be based on answering questions to demonstrate an understanding of the material covered

in this unit. Point form answers are okay if ideas are complete and use vocabulary (Word Bank)

provided. For questions out of 4 marks, there are 4 responses expected.

1. A Roller Coaster With A Mass Of 800 Kg Sits Stationary At The Top Of A Section Of Track, 75 M Abovethe
1. A Roller Coaster With A Mass Of 800 Kg Sits Stationary At The Top Of A Section Of Track, 75 M Abovethe
1. A Roller Coaster With A Mass Of 800 Kg Sits Stationary At The Top Of A Section Of Track, 75 M Abovethe

Answers

Answer 1

Answer:

Give me some hint please

Answer 2

Based on the calculations, potential energy of this roller coaster at a height of 75 meters is equal to 588,000 Joules.

How to calculate potential energy?

Mathematically, potential energy is calculated by using this formula:

P.E = mgh

Where:

P.E represents potential energy.m is the mass.h is the height.g is acceleration due to gravity.

Note: Acceleration due to gravity is equal to 9.8 m/s².

At a height of 75 m, we have:

P.E = 800 × 9.8 × 75

P.E = 588,000 Joules.

At a height of 60 m, we have:

P.E = 800 × 9.8 × 60

P.E = 470,400 Joules.

At a height of 45 m, we have:

P.E = 800 × 9.8 × 45

P.E = 352,800 Joules.

At a height of 30 m, we have:

P.E = 800 × 9.8 × 30

P.E = 235,200 Joules.

At a height of 15 m, we have:

P.E = 800 × 9.8 × 15

P.E = 117,600 Joules.

In conclusion, we can deduce that the potential energy of this roller coaster decreases with a decrease in height.

Read more on potential energy here: https://brainly.com/question/1242059

#SPJ2


Related Questions

Using the figure shown, if I₃= 1.17 A, then (I₁ , I₂) A is:

a- (3.17 , 2.00)
b- (1.33 , 0.17)
c- (1.67 , 0.50)
d- (1.27 , 0.10)

Answers

The value of the current in each arm of the circuit is given by Kirchhoff's

Rules.

The correct option for (I₁, I₂) is; b-. [tex]\underline{(1.33, \ 0.17)}[/tex]

Reasons:

By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;

[tex]\displaystyle \mathbf{ \sum \limits_{k = 1}^ n I_K} = 0[/tex]

Which by the direction of the currents in the given circuit diagram, we have;

I₁ - (I₃ + I₂) = 0

Therefore;

I₁ = I₃ + I₂

According to Kirchhoff's loop rule theory, we have;

[tex]\displaystyle \mathbf{\sum \limits_{k = 1}^ n V_K} = 0[/tex]

In the loop having the 2 Volts emf., we have;

-I₃·R₁ + 2 + I₂·R₂ = 0

I₃ = 1.17 A

R₁ = 2 Ω

R₂ = 2 Ω

Which gives;

-1.17 × 2 + 2 + I₂×2 = 0

I₂ × 2 = 2.34 - 2 = 0.34

I₂ = 0.34 ÷ 2 = 0.17

I₂ = 0.17 A

From the loop having the 7 Volts emf. we have;

7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0

Which gives;

7 - 0.34 - 5·I₁ = 0

5·I₁ = 7 - 0.34 = 6.66

I₁ = 6.66 ÷ 5 = 1.332

Therefore;

[tex]\underline{\mathbf{(I_1, \, I_2)} = (1.33, \, 0.17)}[/tex]

Learn more about electric circuits here:

https://brainly.com/question/2608877

Please answer the question in the picture, worth 25 points

I will report any links or false answers immediately

Answers

Answer:

Option C, increases and decreases

Explanation:

When an object making noise approaches you, the wave frequency increases leading to a higher pitch. Conversely, when it moves away from you or retreats, the wave frequency decreases leading to a lower pitch. This can be observed in ambulance sirens.

14. Earthworms are crucial for forming soil. As they search for food by digging tunnels,
they expose rocks and minerals to the effects of weathering. Over time, this process
creates new soil. Worms are not the only living things that help to create soil. Plants
also play a part in the weathering process. As the roots of plants grow and seek out
water and nutrients, they help to break large rock fragments into smaller ones. Have
you ever seen a plant growing in a sidewalk? As the plants grows, its roots spread into
tiny cracks in the sidewalk. These roots apply pressure to the cracks, and, over time,
the cracks become larger, ice wedging can occur more readily. As the cracks expand,
more water can flow into them. When the water freezes, it expands and presses against
the walls of the cracks, which makes the cracks larger. Over time, the weathering
caused by water, plants, and worms help to form soil. QUESTION: Ice wedging, as
described in the passage, is an example of which of the following?
A mechanical weathering
B. Oxidation
C. chemical weathering
D. Hydrolysis

Answers

Ice wedging, as described in the passage, is an example of mechanical

weathering.

Mechanical weathering is also known as physical weathering and it

involves the breaking of rock into smaller particles without causing changes

in the chemical properties.Mechanical weathering is usually carried through

physical processes such as freezing and thawing etc.

In this scenario, we were told that water freezes, expands and presses

against the walls of the crack thereby breaking into smaller parts which is a

physical process hence mechanical weathering being present.

Read more about Mechanical weathering on https://brainly.com/question/458304

It takes about 4.4 Newtons to lift 1 pound.
How many Newtons would it take to lift 2 pounds?

Answers

it takes 8.8 newtons to lift 2 pounds

If it takes 4.4 Newton to lift 1 pound, then to lift 2 pounds the force required will be equal to 8.8 Newton.

What is Force?

A force in physics is an input that has the power to change an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe forces.

Being such a vector quantity, a force does have magnitude and direction. The SI unit metric newton is used to measure it (N). The letter F stands for force.

According to Newton's second law's original formulation, an object's net force is equal to the speed that its momentum is changing over time.

As per the given data in the question,

It takes 4.4 N to lift 1 pound,

Let the total force required to lift 2 pounds is x.

x = (4.4 × 2)/1

x = 8.8 N

To  know more about Force:

https://brainly.com/question/13191643

#SPJ2

.
A distance-time graph indicates that an object travels 2 m in 2 s and then travels another 80 m during the next 40 s.

What is the average speed of the object?

Answers

Answer:

Explanation:distance-time =speed

a,V =s/t

V=2m/2s

V=1m/s

b,v=s/t

V=80m/40s

V= 2m/s

The average speed is 2m/s

Transverse waves move particles back and forth along the same direction in which the waves travel.
True false question.
True
False

Answers

Answer:

False, I am pretty sure.

Explanation:

Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.

Would you die if you take the car keys out of the ignition and throw them in the back seat while you coast down a mountain-side in an attempt to save fuel and look cool for the girl in said back seat.

Answers

Answer:

bro what.

Explanation:

... is this an actual physics question?

4. If a charged body is negatively charged, it has excess of _______

Answers

Answer:

Electrons

Explanation:

Electrons are negatively charged sub-atomic particles, therefore when a body's negatively charged, it means that there's more electrons than protons.

Someone help me please !!!! Will mark Brianliest !!!!!!!!!!!!!!!!

Answers

Strain it , the sand didn’t dissolve in the solution it just settled in the bottom

Answer:

Decant it.

Explanation:

Pour the water/sugar solution off the sand. When the sand wants to start coming out as well, Stop and add fresh water to the beaker, stir to rinse the remaining solution into a less concentrated solution and decant again.

Repeat the dilution process until the mix is essentially sand and water, then drive the remaining water from the sand by drying.

A wire that is 1.0 m long with a mass of 90 g is under a tension of 710 N. When a transverse wave travels on the wire, its wavelength is 0.10 m. What is the frequency of this wave? ​

Answers

Answer:

890 Hz

I hope you liked my answer. Thank You!

Look at the circuit given below. It consists of a cell, a bulb with two terminals X, Y and wires. P, Q, R and S are positions marked. What is the direction of the flow of current? a) PQXYRS b) SRYXQP c) SPQXYR d) PSRYXQ

Answers

The conventions for the current allow to find the result for which is the direction of the current the is circuit is:

It leaves the positive pole, goes to the blue cable, to the light bulb, from there to the red cable and reaches the negative pole.

Current is the movement of electrons in a circuit per unit time.

In an electrical circuit the electrons that have a negative charge leave the negative electrode towards the positive electrode, by convention the current goes in the opposite direction from the positive electrode towards the negative electrode.

When analyzing the given circuit, the current leaves the positive pole at the top of the battery and moves through the blue wire, reaches the light bulb and moves the red wire and reaches the negative pole of the battery.

In conclusion using the conventions for the current we can find the result for which is the direction of the current the is circuit is:

It leaves the positive pole, goes to the blue cable, to the light bulb, from there to the red cable and reaches the negative pole.

Learn more about electric current here: brainly.com/question/996480

when do we say a curvilinear motion is accelerated?​

Answers

Answer:

There always is an acceleration in a curvilinear motion, as the velocity vector changes, so always.

The work done by an electric force in moving a charge from point A to point B is 2.70 × 10‒3 J. The electric potential difference between the two points is VA ‒ VB = 50.0 V. What is the charge?

Answers

The charge moved by this electric force is [tex]5.4 \times 10^{-5} \; Coulombs[/tex].

Given the following data:

Work done = [tex]2.70 \times 10^{-3}\;Joules[/tex]Potential difference = 50.0 Volts

To determine the charge:

Mathematically, the work done by an electric force in moving a charge from one point to another is given by the formula:

[tex]W = PQ[/tex]

Where:

W is the work done.P is the electric potential difference.Q is the charge.

Making Q the subject of formula, we have:

[tex]Q =\frac{W}{P}[/tex]

Substituting the given parameters into the formula, we have;

[tex]Q =\frac{2.70 \times 10^{-3}}{50}\\\\Q =5.4 \times 10^{-5} \; Coulombs[/tex]

Read more on charge here: https://brainly.com/question/14327016

Suppose you want to make the demonstration more dramatic by attracting as much hair as possible with the balloon. Which of the following is the best choice to accomplish your goal? A. Decrease the electric force by holding the balloon closer to the hair. B. Increase the electric force by rubbing the balloon for a longer period of time. C. Decrease the electric force by using a larger balloon. D. Increase the electric force by holding the balloon farther away from the hair.

Answers

Answer:

B. Increase the electric force by rubbing the balloon for a longer period of time.

Explanation:


A gold fish weighing 13g has a speed of 8.8m/s. What is its Kinetic energy

Answers

Answer:

0.47 J

Explanation:

Would it be possible to direct the speeds that a coaster will reach before its ever placed on a track?How?

Answers

Yes, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

According the principle of conservation of energy, the total kinetic energy is equal to the total potential energy.

[tex]P.E _i + K.E_i = P.E_f + K.E_f \\\\mgh_i + \frac{1}{2} mv_i^2 = mgh_f + \frac{1}{2} mv_f^2\\\\gh_i + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\g(0) + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\\frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\v_i^2 = 2gh_f + v_f^2\\\\v_i^2 - 2gh_f = v_f^2\\\\v_f = \sqrt{v_i^2 - 2gh_f}[/tex]

where;

[tex]v_i[/tex] is the initial velocity of the roller coaster[tex]v_f[/tex] is the final velocity of the roller coaster[tex]h_f[/tex] is maximum height reached by the roller coaster

Thus, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

Learn more about conservation of energy here: https://brainly.com/question/166559

18. Why is the sun included in this model of the water cycle?

A. The water cycle takes place in the atmosphere and and since the sun can be
seen through the atmosphere it make the model more detailed
B. The sun is the driving force that provides the energy that keeps the water cycle
going
C. The water cycle takes place in the hydrosphere and since the sun makes it
possible for us to see everything it is included in the picture.
D. The sun is part of condensation and run-off

Answers

Answer:

b

Explanation:

1st grade common sense

Which law of motion uses the formula mass = force x acceleration?

Answers

Answer:

Newton's second law

Explanation:

ur mom walked into a store and got milk

Answers

Answer:

is there any questions

Answer:

What is your question???

Explanation:

7. Cellular respiration that uses oxygen is called ​

Answers

Answer:

Cellular respiration that uses oxygen is called ​Cellular respiration

Explanation:

Without oxygen, it's call fermentation.

The diagram below shows a child pulling a 50.-kg friend on a 20 kg sled by applying a 300. newton force on the sled rope at an angle of 40 degrees with the horizontal. The sled moves at constant velocity as the person pulls with the 300 N force.

Answers

The vertical component of the applied force on the sled is 192.84 N.

The given parameters:

Mass of the friend, M = 50 kgMass of the sled, m = 20 kgApplied force, F = 300 NInclination of the force, θ = 40 ⁰

The vertical component of the 300 N force is calculated as follows;

[tex]F_y= F \times sin(\theta)\\\\F_y = 300 \times sin(40)\\\\F_y = 192.84 \ N[/tex]

Thus, the vertical component of the applied force on the sled is 192.84 N.

Your question is not complete, the missing part of the question is below:

The vertical component of the 300 N force is approximately?

Learn more about vertical component of forces here: https://brainly.com/question/7181504

A person is drinking a glass of soda with ice.
which option describes the relative kinetic energy of molecules in and above the soda in the glass?

A. in : least energy
above : intermediate and greatest energy

B. in : greatest energy
above : least energy

C. in : least energy
above : greatest energy

D. in least and intermediate energy
above : greatest energy ​

Answers

The relative kinetic energy of molecules in the soda is least energy and above the soda in the glass is greatest energy.

The relative kinetic energy of gas molecules increases with increase in the mean distance between the gas molecules.

Also, relative kinetic energy of gas molecules increases with in the temperature of the gas molecules and decreases with a decrease in the temperature of the of the gas molecules;

ΔK.E ∝ T

The ice in the soda lowers the temperature of the gas molecules, thereby reducing their average speed which in turn reduces the average kinetic energy of the gas molecules in the soda.

Above the soda in the glass, the concentration of the gas molecules is less and their mean distance is greatest when compared to inside the soda. This results to an increase in the speed of the gas molecules which increases their average kinetic energy.

Thus,  the relative kinetic energy of molecules in the soda is least energy and above the soda in the glass is greatest energy.

Learn more about temperature and kinetic energy here: https://brainly.com/question/305606

This is the question I need help with

Answers

Answer:

Explanation:

If we ASSUME that a CCW torque is positive

τ = 10sin135[8.0] - 16sin90[4.0] + 19sin160[3.0] = 12 N•m

as the result is positive, the net torque is CCW.

An ammeter has azero offset error This fault will affect

Answers

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

What is resistance?

Resistance is the obstruction of electrons in an electrically conducting material.

                                                                                         

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

2. Define Lightning conductor. How does it work?

Answers

In Building, there are a host of protective devices that are installed to protect lives and properties, one of them is the Lightning Conductor that  a metal rod mounted on a structure and intended to protect the structure from a lightning strike. It works on the principle of induction

Principle of Operation of Lightning Conductor

The lightning conductor works on the principle of induction:

When a charged cloud passes by the building hosting the Lightning conductor, it gets a charge opposite to that of the cloud through the process of induction. They are Typically made from copper material.

Most Lightening conductors are made from copper materials.

Learn about Lightning Conductor:

https://brainly.com/question/2824044

If a rocket experiences an acceleration generated by the gravity force between the earth and itself, what is this acceleration if the rocket flies 1000 km above the ground and the Earth's radius is 6.378 * 10 ^ 6 * r m. We know the Earth has a mass of 5.97*10^ 24 kg(in m/s^ 2 , G=6.67*10^ -11 N(m/kg)^ 2 ) ?
a 8.97
b 7.32
c 9.81
d 5.5
e 11.45

Answers

This question involves the concepts of Gravitational Force and Weight force.

The value of acceleration is "b. 7.32 m/s²".

At the given height the weight of the rocket must be equal to the gravitational force between rocket and the Earth:

[tex]W=F_G\\mg=\frac{GmM}{R^2}\\\\g=\frac{GM}{R^2}[/tex]

where,

g = acceleration = ?

G = universal gravitational constant = 6.67 x 10⁻¹¹ N.m²/kg²

M = mass of earth = 5.97 x 10²⁴ kg

R = Radius of Earth + Height = 6.378 x 10⁶ m + 1 x 10⁶ m = 7.378 x 10⁶ m

Therefore,

[tex]g=\frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(5.97\ x\ 10^{24}\ kg)}{(7.378\ x\ 10^6\ m)^2}[/tex]

g = 7.32 m/s²

Learn more about the gravitational force here:

https://brainly.com/question/24783651?referrer=searchResults

Identify the types of motion a) The movement of a snail on the ground b) The strings of the guitar c) The whirling of stone tied with a thread

Answers

Answer:

1. friction, gravity,

Explanation:

An object falls through the air, gaining speed as it falls. A student claims th
new energy, and so it breaks the law of conservation of energy. Which stat
why the student is incorrect? (1 point)
Energy can be created without breaking the law of conservation
Energy is converted from other forms, not created.
O Equal and opposite amounts of other energy are also created.
O Speed is not related to energy in any way.

Answers

Answer:

Energy is converted from other forms, not created

Explanation:

The ball has a decrease in potential energy which allows the kinetic energy, and therefore speed, to  increase

identify the origins of breakdown when using a spectrum analyzer

Answers

Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.

1. First is Ultraviolet

2. Next is Infrared

3. Then the radio

4. Lastly the Visible lights.

These are the answers to the problem.

An Astronaut lands on an Earthlike planet and drops a small lead ball with a mass from the top of her spaceship. The point of release is 25 m above the surface of the planet and the ball takes 5 s to reach the ground. The astronaut's mass is 80 kg. Astronaut weight on the planet is

PLEASE NO LINKS, REAL ANSWERS DON'T WASTE TIME.

Answers

First we have to find out the gravity on that planet. We use Newton second equation of motion. It is given as,

s = ut +(gt^2)/2

Distance s = 25m

Time t = 5 s

Velocity u = 0

By putting these values,

25 = 1/2.g.(5)²

g = 2

So the gravity on that planet is 2. Lets find out the weight of the astronaut.

Mass of the astronaut on earth m = 80 kg

Weight of astronaut on earth W = mg = (80)(9.8) = 784 N

Weight of astronaut on earth like planet = (80)(2) = 160 N

x = 160N

Other Questions
through:(-3,-1), slope=4/3 help plzzzzzzzzzzzzzzzzz Colin invests 2350 into a savings account. The bank gives 4.2% compoundinterest for the first 4 years and 4.9% thereafter. How much will Colin have after10 years to the nearest pound? Your project team has expressed their communal position that they would prefer not to have a review meeting at the end of the project. As project manager, how should you respond to show the value of this meeting? What is 35 + 34 ? I cant use calcu pls help me help me plssssss.How does the interaction between Dionysius and Pythias in Paragraph 3 affect the story?It demonstrates that Dionysius is no longer feared by the people he rules.It presents Dionysius as cruel leader who will not tolerate criticism.It forces Dionysius to change the way he treats the citizens of Syracuse.It causes Dionysius to question his abilities as a leader of Syracuse. Which of the following is an example of an author's use of allusion?An author compares the main character to the mythological god Zeus.An author gives human characteristics to the storm, describing it as "wailing" and "moaning."An author describes the setting using sensory details.An author reveals her own feelings toward a character. Please help me I really such at geometry GIVING BRAINLIEST What is the solution to the system of equations graphed below? 2x^2When x is equal to -3 How many cm3 are there in 1 dm3? 2. It is estimated that over 100,000 students will apply to the top 30 MBA programs in the United States this year. a. Using the concept of net present value and opportunity cost, explain when it is rational for an individual to pursue an MBA degree. b. What would you expect to happen to the number of applicants if the starting salaries of managers with MBA degrees remained constant but salaries of managers without such degrees decreased by 20 percent? Why? Calculate the area of trapezium CDEF. 5 page essay of the dangers of driving unlicensed How does the water cycle contribute to the "brown ocean" effect? found on the continental divide, what was the halfway mark of the trail? Which function defines the sequencesimplified - 6, -10, -14, -18, ..., where f (1) = -6 ?Choose:An = n - 26An = 4n - 2An = -n + 32An = -4n - 2 Use the distance to find the distance between the points A (-3,7 and B (-2,5). If someone is traveling 3mi per 15 mins how far do they go in 1min? what is the similarities between traditional and modernized presentation