Answer:
3.375moles of O₂
Explanation:
The reaction expression is given as;
2KClO₃ → 2KCl + 3O₂
Number of moles of KClO₃ = 2.25moles
Now;
To find the number of moles of O₂ produced we use known number of moles.
So;
2 mole of KClO₃ will produce 3 moles of O₂
2.25moles of KClO₃ will produce [tex]\frac{2.25 x 3}{2}[/tex] = 3.375moles of O₂
What is the name of the family with an oxidation number of +2?
a. Halogens
b. Alkali Earth Metals
c. Noble Gasses
d. Transition Metals
Answer:
Alkali Earth Metals
Explanation:
The oxidation number is equal to the charge which is determined by the valence electrons. Alkali Earth Metals all have 2 valence electrons and, therefore, an oxidation number of 2.
Answer:
+2alkaline earth metal and +1 oxidation number is alkali metal
Explanation:
alkali is Arabic word means ash
The chemical formula for the ionic compound aluminum sulfite is Al2(SO3)3. Explain why there are 2 cations for every 3 anions in this compound.
Answer:
Explanation:
While trying to write the chemical formula for a compound (a neutral molecule), one must identify and exchange the charge of the cation with that of the anion to become the subscript of one other. For example
Aluminium oxide has Aluminium (Al) and oxygen (O); since Al has a charge of 3+ (the cation) and O has a charge of 2- (the anion), the compound would have it's charges as Al³⁺O²⁻ and when the charges are exchanged to there subscripts, it would form Al₂O₃; thus there would be two cations of aluminium for every three anions of oxygen in order to have a neutral molecule.
This same explanation can be given to Aluminium sulfite. Aluminium sulfite has Aluminium (Al) and sulfite (SO₃). Al has a charge of 3+ (cation) while sulfite has a charge of 2- (anion), with the compound having it's charges as Al³⁺(SO₃)²⁻ and when the charges are exchanged to there subscripts, it would form Al₂(SO₃)₃ and would thus have 2 cations of aluminium (Al³⁺) for every 3 anions of sulfite (SO₃³⁻) in order to have a neutral molecule.
Which process describes the wearing
away of rock?
A. drainage
B. erosion
C. infiltration
D. weathering
Answer:
weathering
Explanation:
hope this helps
When light pases through a prisim,white light will be separated into different colors. which statment best explains this observation?
Answer:
It's B
Explanation:
The classic rainbow is made of certain colors, so If a white light passed through a glass prism [and only glass] the rainbow would show because of the colors bending [the naked eye can't see that 0-0]
Also, you know the sky is blue right?? The color blue in that prism when the light shined over was the shortest and wavy color. each color has it's own wave. blue is just the shortest and waviest one.
A reaction begins with 130.5g of substance X and substance Y. How many grams of
substance X and Y are there at the end of the reaction?
A) not enough information provided
B) 100g
C) 65.25g
D) 130.5g
Answer:
130.5g
Explanation:
At the of the reaction, the combined mass of X and Y will be 130.5g.
The premise for this conclusion is based on the law of conservation of matter.
This law states that "in a chemical reaction, matter is neither created nor destroyed but changed from one form to another".
In essence, in a chemical reaction, there is no mass loss.
The amount of product in the reaction is expected to be the same as the amount of reactants used in the experiment. When we start with 130.5g then we should end with 130.5gwhat three geologic events occur due to movement of material within the earth
Answer:
Convection currents are a circular current caused by the difference in temperatures from the bottom to the top of the mantle. It is because of these currents that the plates of the Earth have moved in the past and are moving today. These plate movements cause earthquakes, mountain building, and volcanism.
Explanation:
You have a shiny metal disc that weighs 1.31 kg that you want to find out what its made of. When you put the disc into a graduated cylinder with 5L in it, you see that the water level rose by about 125 mL. You have a list of densities for various shiny metals: silver= 10.5 g/ mL, nickel= 8.9 g/mL, titanium = 4.5 g/mL, and rhodium = 10.7 g/ mL. What is the disc made of?
Answer:
The disc is made of silver.
Explanation:
To solve this question we need to calculate the metal's density. To do so we need its mass (already given by the problem, 1.31 kg) and its volume.
Following Archimedes' principle, the volume of water displaced by the disk is equal to the disk's volume. This means the metal's volume is 125 mL.
Now we convert 1.31 kg into g, to better compare with the given options:
1.31 kg * 1000 = 1310 gFinally we calculate the metal's density:
Density = Mass / VolumeDensity = 1310 g / 125 mL = 10.48 g/mLLooking at the densities given by the problem, the closest one is silver.
Have you ever seen a building that looks as if it were made out of mirrors? These buildings are made using reflective glass. How would
replacing clear windows with reflective glass affect the temperature inside the building? Explain your ideas.
Answer:
the sun would reflect off of the windows causing less heat to travel into the building
Explanation:
Write one paragraph explaining what you have learned so far about Kinetic and Potential Energy.
(will give brainliest)
Answer: Energy stored in an object due to its position is Potential Energy. The energy that a moving object has due to its motion is Kinetic Energy. All forms of kinetic energy are the result of a previous state of potential energy. For example, the stored chemical potential energy of a battery converts to electrical kinetic energy to transport electricity to a light bulb, which radiates thermal kinetic energy. Potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.
How many valence electrons does this atom have? (Urgent)
Answer:
It only has 7 valence electrons because there are seven electrons in the highest orbital.
Explanation:
What is the percent of SO2 in H2SO4?
Help Please
The percent of SO₂ in H₂SO₄ : 65.3%
Further explanationProust states the Comparative Law that compounds are formed from elements with the same Mass Comparison so that compounds have a fixed composition of elements
%Mass A in AxBy =
[tex]\tt \dfrac{x.Ar~A}{MW~A_xB_y}\times 100\%[/tex]
For SO₂ in H₂SO₄ :
MW SO₂ = 32 + 2.16=64 g/mol
MW H₂SO₄ =2.1+32+4.16=98 g/mol
The percent of SO₂ :
[tex]\tt \dfrac{64}{98}\times 100\%=65.3\%[/tex]
Atoms and elements are examples of A. molecules. B. mixtures. C. compounds. D. pure substances.
Answer:
atom are very tiny partical
Please Help ASAP 100 points! Students set up a controlled experiment. They put five crickets in each of three identical containers. They set one container to 15C, one to 20C and one to 25C. Then they count the number of cricket chirps in each container during 1 hour. What are the TWO constants in this experiment? A: The number of crickets in each container. B:The temperature of each container. C: The number of cricket chirps. D: The kind of containers used.
Answer:
A and C.
Explanation:
When an egg is boiled in a pot of water on the stove, there is more than one kind of heat transfer. Heat is transferred from the stove to the pot directly since they are physically touching. Heat is also transferred from the pot to the egg, carried through the water.
Answer:
Stove → Pot = conduction, Pot → Egg = convection.
Explanation:
There are three ways in which heat is being transferred from one medium to the other and the means are; radiation, conduction and convection heat transfer.
Radiation is the process in which heat is being transferred through emission in form of electromagnetism. Conduction heat transfer Is the process in which heat is being transferred through contact that is two bodies touching each other. Convection heat transfer is the kind of heat that happens through gases.
Since the heat from the stove touching the pot is the conduction heat transfer.
After the water has been heated up, the gas from the water makes the convection heat transfer.
What type of reaction is this?
Zn + K2 CrO 4 --> K + ZnCro4
A) single replacement
B) double replacement
C) decomposition
D) synthesis
Answer:
a) single replacment........................
Sub teacher didn't explain at all :(
Answer:
tell your teacher when he/she get back report him/she
Many ladybird beetles live in Pedro's garden. He observed them one summer for a science project. Pedro noticed that all the ladybird beetles had red shells. Some of the beetles had many dark spots, some had only a few dark spots, and one or two beetles had no dark spots at all. Around the same time, Pedro's father replanted the garden using just red flowers. A few years later, Pedro observed the ladybird beetles again. This time he noticed that almost all the ladybird beetles had shells with more red visible. They had few or no dark spots on their shells. Pedro concluded that replanting the garden with red flowers caused a change in the ladybird beetle population. Which best explains Pedro's observations?
Answer:
No.
Explanation:
No, Pedro's observations does not suggest that replanting the garden with red flowers caused a change in the ladybird beetle population because the colour of flower has no effect on the change in the population of ladybird beetle, it must be occur due to the dominant genes present in the population of ladybird beetle. This dominant genes is responsible for the presence of more red colour on the ladybird beetles shells.
Consider the following reaction: 3Fe(s) + 4H₂O(g) ➞ Fe₃O₄(s) + 4H₂(g). To answer the following question: "How many moles of hot water vapor (steam) must react to produce 275 g of Fe₃O₄?" How many steps will it take to get the answer? *
4 points
1
2
3
4
Answer: 2
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Fe_3O_4=\frac{275g}{233.5g/mol}=1.18moles[/tex]
[tex]3Fe(s)+4H_2O(g)\rightarrow Fe_3O_4(s)+4H_2(g)[/tex]
According to stoichiometry :
1 mole of [tex]Fe_3O_4[/tex] are produced by = 4 moles of [tex]H_2O[/tex]
Thus 1.18 moles of [tex]Fe_3O_4[/tex] will be produced by=[tex]\frac{4}{1}\times 1.18=4.72moles[/tex] of [tex]H_2O[/tex]
Mass of [tex]H_2O=moles\times {\text {Molar mass}}=4.72moles\times 18g/mol=85.0g[/tex]
Thus 85.0 g of [tex]H_2O[/tex] will be required and 2 steps are required to get the answer.
Liquid or solid water that falls to the ground is called
I WILL GIVE BRAINLEST IF YOU ANSWER THIS QUESTION QUICKLY!!!
what is an orbital?
Answer:
Electric Patterns and has many different variations.
Explanation:
When halogens react with metals,they form salts called....
When halogens react with metals,they form salts called metal halides according to their electronic configuration according to which reaction takes place.
What is electronic configuration?Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ2
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer: lol the answer is A
Explanation:
i’m just smart like that , thought i should give y’all a clue
Answer:
The ratio of atoms in a compound is fixed.
Explanation:
its a
I need this answer. any thing will help
Answer: condensaytion
Explanation: its reverse vaporation instead of water turning into gas gas turns into water
what are the names of these compounds??
CCI4
K2O
Answer:
CCI4 Carbon tetrachloride
K2O Potassium oxide
Explanation:
which two elements make up the main structure of an organic compound?
A. Carbon and oxygen
B. Nitrogen and oxygen
C. Carbon and hydrogen
D. hydrogen and sulfur
Answer:
b nitrogen&oxygen
Explanation:
i'm built different
27. Based on Reference Table S, which of the
following atoms requires the least energy for the
removal of the most loosely bound electron?
A) Br
B) Sr
C) Be
D) Sn
Answer:
This question is incomplete but the correct option is B
Explanation:
This question is incomplete because of the absence of the "Reference Table S", however the question can still be answered in the absence of the table. The energy described in the question is the ionization energy (energy required to remove the most loosely bound electron in an atom). This question seeks to know the atom (from the options provided) with the least ionization energy.
Ionization energy increases from left to right across the period because it's easier to remove a single electron (valence electron) from the outermost shell than to remove two electrons from the same shell; thus the more the valence electrons (in a shell), the higher the ionization energy. Thus, bromine (Br) and tin (Sn) have high ionization energies because they have more number of electrons in there outermost shell.
Berylium (Be) and strontium (Sr) are both in the group 2 of the periodic table because they both have 2 electrons in there outermost shell. Ionization energy decreases down a group. This is because the farther an electron is from the nucleus, the weaker the force of attraction between the nucleus and the electron. Thus, strontium (Sr) would have a lesser ionization energy between the two and would indeed have the least ionization among the options provided. Hence, the correct option is B
How many atoms of S are in the following formula: 3Na(SO4)2
1) 6
2) 8
3) 3
4) 5
Answer:
6
Explanation:
at the left.
6.
1. Work equals
A force x distance
B. force - distance
C. force + distance.
The force you apply to a machine
is the
A. input force.
B. output force.
C. efficiency.
2.
The unit of work is the
A. watt.
B. newton.
C. joule.
7.
The efficiency of all real
machines is
A. greater than 100%
B. equal to 100%
C. less than 100%
3.
Power is the amount of
A. work done per unit of time.
B. force on a certain area.
C. pressure in a volume of liquid.
8.
4.
The unit for power is the
A. joule.
B. Meter per second
C. watt.
The fixed point that a lever rotates
around is called the
A. fulcrum.
B. input force.
C. wedge.
9.
5.
A machine cannot change the
A. direction of the input force.
B. amount of work needed to do
A screwdriver is an example of a
simple machine called a
A. pulley.
B. screw
C. wheel and axle.
a task.
C. distance over which a force
is applied
10.
Your front teeth are
A. wedges.
B. levers.
C. compound machines.
Answer:
i know right answer
Explanation:
let me explain
2. Why is soil considered limited?
Answer: he natural area of productive soils is limited – it is under increasing pressure of intensification and competing uses for cropping, forestry, pasture / rangeland and urbanization, and to satisfy demands of the growing population for food and energy production and raw materials extraction
How much electronic waste does Orlando produce ?
Answer:
20 to 50 million
Explanation: