Answer:
Carbon dioxide
Explanation:
that's all I can say
When chlorine is added to sodium bromide solution, the mixture turns brown. What type of reaction has taken place?
Answer:
A displacement reaction
Explanation:
This is because the chlorine reacts with the sodium bromide, forcing it to go brown.
I hope this helps, good luck! (✿◡‿◡)
When chlorine is added to a solution of sodium bromide (either as a gas or dissolved in water), the bromine is replaced by the chlorine.
What do you mean by Solution?In chemistry, a solution is a homogeneous mixture of two or more compounds in their relative proportions that can be continually altered up to what is referred to as the limit of solubility.
Although the word "solution" is typically used to refer to the liquid state of matter, solutions of gases and solids are also possible.
When chlorine is added to a solution of sodium bromide (either as a gas or dissolved in water), the bromine is replaced by the chlorine. Because chlorine is more reactive than bromine, sodium bromide loses its bromine content. The mixture darkens to brown. The bromine has been displace, giving this colour of brown.
To learn more about Solution, refer to the below link:
https://brainly.com/question/28330385
# SPJ2
what is haber's process?
Answer:
method for procuring ammonia
Explanation:
In the Haber process, atmospheric nitrogen is converted to ammonia by reacting it with hydrogen (H2)
What is the purpose of a catalyst?
Answer:
option c
Explanation:
as catalyst increases the reaction while activation energy is inversely proportional to rate of reaction, so option c is correct
The purpose of a catalyst to lower the activation energy of a reaction.
What is catalyst?A type of chemical that, without becoming consumed by the process, speeding a chemical reaction or reduce the temperature as well as the pressure required to initiate one. The addition of a catalyst to speed up a reaction is known as catalysis.
What is activation energy?The bare minimum additional energy needed by a reactive molecule to transform into a product is considered as activation energy.
The purpose of a catalyst is to lower the activation energy of a reaction.
Therefore, the correct answer will be an option (C).
To know more about catalyst and activation energy.
https://brainly.com/question/11334504
#SPJ3
Calculate the molar concentration of 4.75 moles of NaCl in
0.50 liters of water?
Answer:
9.5 m
Explanation:
First, divide 4.75 m by the 0.50 l
4.75/0.50
This leaves you with 9.5 m
protons are one of the heavier pieces of an atom. true or false?
Answer:
true
Explanation:
If one mole of an unknown substance is 200.59 g/mole, what is the mass of 0.33 moles of that substance?
Answer: 66.83g
Explanation: (200.59 g/mole = Hg)
0.33 moles = 66.83g
The air we breathe contains different individual gases (mostly nitrogen and oxygen). Which of the following correctly describes the air we breathe?
a
element
b
compound
c
mixture
d
none of these
⚠️⚠️PLEASE HELPP⚠️⚠️
Describe an every day example of an object that has energy of motion and object that has stored energy
Answer:
Humans
Explanation:
Humans have energy of motion and store energy.
Every object will have any form of energy. For instance, when we are walking we gains a kinetic energy. We use electronic devices where electrical energy is stored and can be converted to mechanical energy to activate any motors.
What is energy transformation?Energy can neither be created nor be destroyed. However it can be transformed to any other forms. Thus, the total energy will conserved always.
We have a lot of example for energy transformation and storage. The energy form stored by virtue of the position of an object is called potential energy. Whereas, when the object starts moving potential energy converts to kinetic energy.
Thus, thermal vibrations of particles, our every day activities all are associated with a kinetic energy. Kinetic energy of each body depends on the mass and velocity of the body. The more the mass and velocity more will be the kinetic energy.
To find more on kinetic energy, refer here:
https://brainly.com/question/26472013
#SPJ5
please help this will help my grade a lot
Answer:
a- customary systems..
whoever answers first ill give brainliest! ANSWER QUICK PLS
Mr. B weighs out 22.8 grams of cobalt (II) chloride, then dissolves that CoCl2 in 500 mL of water. What is the concentration of his cobalt (II) chloride solution?
a. 3.51 M CoCl2
b. 0.351 M CoCl2
c. 0.176 M CoCl2
d. 0.0456 M CCl2
thank you so much!
Answer: b
Explanation: had the same question
How many moles are 3.21x10^28 moles of N2
Answer:
number of moles =
[tex]53.3 \times 10 {}^{3} mol[/tex]
Explanation:
here's the solution in attachment.
is pH 6 a weak or strong acid?
Answer:
6 pH is a weak acid
Explanation:
Generally, a strong acid has a pH of about zero to 3.
The pH scale typically ranges from 1 to 14, with lower numbers representing acids, higher numbers, bases. Neutral liquids like water have a pH of 7.
(Please heart the answer if you find it helpful, it's a motivation for me to help more people)
Jacob walked into a shop to buy cups for his house. He saw the cups shown below. Why does the cup on the right appear yellow? A. The cup absorbs yellow light but reflects all other colors of light. B. The cup reflects yellow light but refracts all other colors of light. C. The cup refracts yellow light but absorbs all other colors of light. D. The cup reflects yellow light but absorbs all other colors of light.
Answer:
D. The cup reflects yellow light but absorbs all other colors of light.
Explanation:
The cup in the shop appears yellow because the cup reflects yellow light but absorbs all colors of light.
Due to the materials the cup is made of, it is able to specifically reflect yellow and absorb other radiation types.
The color we see are products of the part of visible radiations they reflect.
The cup in this instance reflects yellow and absorbs other color.
Newton's first law is demonstrated in what station?
Answer:
hope this helps!
Explanation:
This law states that a still object will stay still unless a force pushes or pulls it. A moving object will stay moving unless a force pushes or pulls it. Gravity and friction are forces that constantly push and pull the "stuff" on earth. So, when we roll a ball, it slowly comes to a stop.
pls help 6th grade science
Why is it important to know the temperature of the water when dealing with ions in
an aqueous solution?
Water does not ionize at higher temperatures.
Water becomes very acidic when at low temperatures.
Temperature affects the concentration of water.
The ionization constant of water is usually given at 25 °C.
Water at a higher temperature will produce more ions than water at a lower temperature.
Answer:
temperature affects the concentration of water
True/False: There are about 400 known elements
Answer: false
Explanation:
there are no more then 112 known elements.
Answer:
false
Explanation:
their are only 118 element
Please help I will give brainliest
Answer:
Explanation:
c. - vaccine
b. - immunity
d. - phagocyte
f. - b cell
e. - t cells
a. active immunity
what volume of 0.20 M NaCl contains 10.0 g
How many molecules are in 10 moles of H2
The number of molecules in one mole of hydrogen gas is 6.02 × 10²³ . The number of molecules in 10 moles of hydrogen gas is then 6.022 ×10²⁴.
What is one mole?Any substance that contains 6.022 × 10²³ number of atoms is called ne mole of that substance. This number is called Avogadro number. Hence, one mole of every elements contains Avogadro number of atoms.
Hydrogen is the first element in periodic table. It is an alkali metal. The number of molecules in one mole of H₂ is equal to Avogadro number. Mass of a molecule with one mole of amount is called its molecular mass.
Number of molecules of H₂ in one mole = 6.02 × 10²³
Then number of molecules in 10 moles is Avogadro number times the number of moles.
= 10 × 6.022 × 10²³ = 6.022 ×10²⁴ molecules
Therefore, 10 moles of H₂ contains 6.022 ×10²⁴molecules..
Find more on Avogadro number:
http://brainly.com/question/11907018
#SPJ2
1pt Which of the following is NOT true about the role tectonic forces play in the rock cycle?
O A. When plates pull apart, rocks melt, and magma forms igneous rocks.
O B. When plates crash together, rocks are buried and form metamorphic rocks.
O c. When plates slide over and under each other, the heat and pressure form igneous rocks.
OD. When rocks push upward and form mountains, the erosion of the mountains can produce sediment.
Tectonic forces do not cause plates to slide over and under each other, to produce heat and pressure which forms igneous rocks
What is the rock cycle?The rock cycle is a cycle which describes how the three basic rock types are related and how earth processes convert one rock type into another over geologic time.
Plate tectonic forces together with weathering and erosional processes, are responsible for the rock cycle.
Tectonic forces play the following roles in rock cycle:
When plates pull apart, rocks melt, and magma forms igneous rocks.When plates crash together, rocks are buried and form metamorphic rocksWhen rocks push upward and form mountains, the erosion of the mountains can produce sedimentTherefore, the statement that when plates slide over and under each other, the heat and pressure form igneous rocks is not True.
Learn more about rock cycle at: https://brainly.com/question/22142661
#SPJ2
How many moles of oxygen are in 2.00 moles of NaCIO4?
Answer: 8 Moles of Oxygen
Explanation: The formula shows that there are (exactly) 4 oxygen atoms in each mole or formula unit. Therefore 4 * 2.00 = 8.
research ocean currents and how they relate to heat transfer.
Answer:
The movement of this heat through local and global ocean currents affects the regulation of local weather conditions and temperature extremes, stabilization of global climate patterns, cycling of gases
✨✨What’s 2 similarities and 2 differences between the Earths layers and the atmospheric layers? ✨✨
‼️DONT COPY OFF LINE PLEASE ‼️
Answer:
Differences: Earth's atmosphere has 5 main layers where as atmospheric layers thins out in each higher layer.
Similarities: They both have multiple layers.
Explanation:
Sorry I only have 1 difference and similarity.
1. Ammonia gas occupies a volume of 450. ml at a pressure of 720, mm Hg. What
volume will it occupy at standard pressure?
Answer:
720+450 = 1170 it's 1170
426.32mL (rounded)
The formula for finding V2 is P1 • V1/P2 and since standard pressure (1atm) is equal to 760 P2 would be 760.
720mmHg • (450mL/760mmHg) = 426.32mL
An 240. mL sample of oxygen at 90.00C and was cooled at constant pressure
until it has a volume of 450.0 mL. What was the final Celsius temperature of this
gas? *
The final temperature : T₂ = 680.625 K
Further explanationGiven
V₁=240 ml
T₁ = 90 + 273 = 363 K
V₂ = 450 ml
Required
The final temperature
Solution
Charles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Input the value :
T₂ = V₂T₁/V₁
T₂ = 450 x 363 / 240
T₂ = 680.625 K
A student rings a brass bell with a frequency of 300 Hz. The sound wave
travels through brass, air, and glass. What is the wavelength of the wave in
brass?
Medium
Wave speed
(m/s)
Brass
4,700
Air
346
Glass
5,640
A. 0.64 m
B. 1.6 m
C. 0.064 m
D. 16 m
The wavelength of the wave in brass medium, given that the wave has a frequency of 300 Hz is 16 m (Option D)
How do I determine the wavelength in brass?The wavelength of a wave is defined according to the following formula:
Velocity (v) = wavelength (λ) × frequency (f)
Divide both sides by frequency
Wavelength (λ = Velocity (v) / frequency (f)
With the above formula, we can obtain the wavelength of the wave in the brass medium. Details below:
Frequency (f) = 300 HzWave speed in brass (v) of = 4700 m/sWavelength in brass (λ) = ?Wavelength (λ = Velocity (v) / frequency (f)
Wavelength in brass = 4700 m/s / 300 Hz
Wavelength in brass= 16 m
Thus, we can conclude that the wavelength is 16 m (Option D)
Learn more about wavelength:
https://brainly.com/question/13659036
#SPJ1
HELP! URGENTLY NEEDED! I NEED THIS ANSWER IN 5 MINUTES AND PERSON WHO HELPS GET THE ANSWER RIGHT GETS 25 POINTS!!! PLEASE I AM FAILING THIS CLASS AND NEED SO MUCH HELP!!!!
The coefficient/s will balance the chemical equation CH4 +O2 -------» CO2 + H2O is
a
1, 2, 1, 2
b
2, 1, 1, 2
c
2, 2, 1, 1
d
1, 1, 1, 2
Answer:
hey miss
Explanation:
The coefficients : a. 1,2,1,2
Further explanationGiven
Reaction(unbalanced)
CH4 +O2 -------» CO2 + H2O
Required
The blanced equation
Solution
Give a coefficient
CH4 +aO2 -------» bCO2 + cH2O
Make an equation
C, left=1, right=b⇒b=1
H, left=4, right = 2c⇒2c=4⇒c=2
O, left=2a, right=2b+c⇒2a=2b+c⇒2a=2.1+2⇒a=2
The equation becomes :
CH4 +2O2 -------» CO2 + 2H2O
A car left from its initial position at 6 pm. The car arrived at its final position at 11pm. How much time did it take the car to arrive ?
Answer:
5 hours.
Explanation:
Given that,
Initial time, [tex]T_i=6\ pm[/tex]
Final time, [tex]T_f=11\ pm[/tex]
We need to find how much time did it take the car to arrive.
Time = final time-initial time
= 11 pm - 6 pm
= 5
So, it takes 5 hours by car to arrive.
Write chemical name ofNH4Cl, Na2CO3.
Answer:
NH4CI
AMMONIUM CHLORIDE
NA2CO3
SODIUM CARBONATE